ReviewsDouble Cutter Insert

Nibbler Metal Cutter Sheet Metal Nibbler Double Head Sheet Metal Nibbler Cutter Adjustable Power Drill Nibbler Cutting Tool Kit

  • WIDE APPLICATION DOUBLE HEAD CUTTER: This cutter can cut sheet metal including steel, copper, aluminum and stainless steel sheet metal, for both flat and curved surfaces.
  • DOUBLE HEAD SPECIAL DESIGN CUTTER: Double head design allow you to continue cutting with the other cutting edge when one side is dull.
  • VERSATILE METAL NIBBLER CUTTER: With this cutter, you will be able to cut out straight line, curve line, arc line or many other irregular lines and shapes.
  • HIGH PERFORMANCE METAL SHEET CUTTER: The cutter can be used on 8mm 1500~3000 RPM electric drills or pneumatic drills.
  • ADJUSTABLE METAL SHEET CUTTER: The cutting edge direction is adjustable in 360 degrees.
Check Stock

15mm x 15mm x 2.5mm -30 Degree Carbide Cutter Insert for Wood Lathe Turning, Woodworking Spiral Helical Planer Cutterheads - Box of 10

  • 15mm x 15mm x 2.5mm -30 Degree Carbide Cutter Insert for Jointers Cutterheads - Box of 10.
  • Insert and cutterhead design greatly reduce tearout..
  • Made of solid tungsten carbide, sharp and durable, Specifically manufactured for hardwoods & MDF.
  • Excellent replacement carbide insert cutter specially Fits Byrd Journal Helical head.
  • 10 pieces per box,packed with a plastic container for safe and easy storage . If one knife edge is dull or nicked,just turn it to another edge which greatly reduces you down time.
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • ...the oil needle is fully pressed into the core. Finally, oil needle installation is completed..
  • [Wide Applications] Bicycle hydraulic disc brake hose kit is compatible for Shimano 355/395/396/445/446/447/486/505/575. The upgraded needle drive insertion tool is perfect for bike shop bike hydraulic hose tools. Secured double-ended driver is compatible with standard or torqued needles..
Check Stock

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
  • WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
  • EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
  • DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
  • APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check Stock

Original Perfect Cigar Cutter Dos Chabetas

  • NEW PERFECT 80 RING GAUGE CIGAR CUTTER Dos Chabetas is for big cigars..
  • New Perfect Cigar Cutter back end without round hole. Get this better engineer design..
  • Just insert the cigar's head into the large opening, hold it in the calibrated chamber and clip off the exact amount every time..
  • The cigar cutter's body is solidly made with brushed stainless steel..
  • They are made to function exactly as expected every time and are fully backed by an exclusive lifetime guarantee..
Check Stock

Original Perfect Cutter

  • NEW PERFECT CUTTER is uniquely designed to cut the exact amount of tobacco from the head of any cigar, including Figurado and Torpedo shaped cigars..
  • New Perfect Cigar Cutter back end without round hole. Get this better engineer design..
  • Just insert the cigar's head into the large opening, hold it in the calibrated chamber and clip off the exact amount every time..
  • The cigar cutter's body is solidly made with brushed stainless steel..
  • Each is packed in an elegant gift box and is Lifetime Guaranteed. A perfect cut is guaranteed every time or you get a free replacement..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 1-1/2” Dia 2+2 Carbide Inserts Slab Flattening Router bit Cutter Planing Bit Woodworking Milling Cutter

  • SIZE: The wood router bit shank 12.7mm（1/2"）.
  • Carbide Inserts: above part 14*14*2 mm(≈ 5/9*5/9*2/25"), 2+2 Insert Design.
  • Professional Spoilboard Surfacing Router Bit,not only can it be used for wood slab flattening.It can also be used for slotting/grooving..
  • UPGRADE:Compared with ordinary milling cutters, this cutter can be replaced with carbide insert.This is more suitable for professional woodworkers..
  • Surface bit cutting applications of Industrial Spoilboard, Rabbeting, Flycutter, Leveler, Surface Planer and Bed Insert Router include spoilboard, large surface planing and trapping on MDF, Balsa Core, hardwood, softwood and all artificial materials.
  • This professional 2+2 wood milling cutter 1/2" Shank Has better bottom clearing effect,finer surface finish and better clearance for 90° angles..
Check Stock

Woodworking Edge Corner Plane Chamfer Plane for Wood Chamfering Trimming DIY Hand Tool Woodcraft Corners Edge Carpenter Gift 7 different cutter heads

  • Chamfer Cutter is made of metal with high compressive strength and ABS, high-speed steel blade, sharp cutting, wear resistance, heat resistance and....
  • 7 kinds of cutter heads can be freely matched, (1 sharp +1 round cutter, double sharp cutter, double round cutter, 1/8 round cutter, 3/16 round....
  • Used with a Wood Woodworking Edge Corner Plane, it is easy to disassemble and assemble. The telescopic part of the cutter head has a tightening nut to....
  • 7 cutter heads suitable for chamfering machine (without chamfering machine), cut out various shapes. High efficiency, small size, easy to carry,....
  • We confidently provide this product with a 180-day worry-free return warranty. So you can buy it as a gift to your father, husband, grandfather....
Check Stock