ReviewsDouble End Mill

3/4\ End Mill Cutter Adapter Holder Bridgeport R8 Shank Adaptor Milling Cutting

  • Ground shank and hole, heat treated for double accuracy.
Check Stock

uxcell a11103100ux0074 5/16\ x 5/16\ Straight Shank 4 Flute Endmill Milling Cutter

  • Package Content : 1 x Straight Shank End Mill.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

uxcell Milling Cutter 4mm Depth 25mm Cutting Dia 8 Flutes HSS T Slot End Mill

  • Package Content : 1 x T Slot End Mill1 x Case.
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

HQMaster Tapered Ball Nose End Mill 1/8 inch Shank Tungsten Carbide Cutter 3D Woodworking Tool CNC Router Bits D=1.0mm

  • SIZE: Ball Radius: 0.5mm (Cutting Diameter: 1.0mm), 1/8” shank, Flute Length: 15mm, Overall Length: 1-1/2".
  • TIALCN coating is a nano coating, which means it’s extremely hard, and can be used at high temperatures and still yield low friction. Package include: 5 pcs Tapered Ball Nose Carving End Mill.
  • Package include: 5 pcs Tapered Ball Nose Carving End Mill.
  • Fit for CNC, Engraving machine. Ideal for Plywood, hardwood, acrylic, 3D carving.
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Malted Barley Grain Mill for Homebrew Beer by Brew-Control

  • Includes a 7.7LB Hopper, 2 Stainless 12 TPI knurled Stainless Steel rollers, 4 Ball Bearing, wooden base with locator feet and crank handle..
  • The mill end plates are made from tough 1/2" aluminum plate to prevent the Stainless Steel roller from spreading..
  • Although the mill gap is adjustable, our grain mill is set to the right gap to start crushing grain right out of the box..
  • Our mill ships with a crank handle but it's just as easily to run with a 3/8" or 1/2" battery powered or electric drill - just remove the handle..
  • The sturdy wooden base has three locator feet to securely center on a 5 or 6.5 gallon (11.8-13.8 inch in diameter) brew bucket..
Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

  • Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
  • Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
  • Stub length increases the strength of the tool, making it less likely to break in the workpiece.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
Check Stock

Stainless Steel Food Mill with 3-Grinding Sizes, Dishwasher Safe

  • 201 Stainless Steel Material: Our food mill is made by high quality 201 stainless steel, more durable than plastic material, stainless steel construction also can be used for a long time, smooth surface make it super easy to clean, dishwasher safe.
  • 3 - Interchangeable Mill Disks: 3 stainless steel grinding discs for preparing foods of fine, medium and coarse textures. Fine disks work well for jellies, baby food, and sauces, medium for applesauce and vegetable soups, and coarse for chunky sauces and mashed potatoes. Spring-loaded lever with a suitable tension for easy disc exchange and assemble.
  • Non-Slip Hanldes & Round Ball: Stainless steel bowl with 2 non-slip handles allow you to place on a pot or a bowl, preventing staining and easily holds hot foods. Hand crank has a super soft rounded ball on the end of the handle, making it easy to hold and move the crank.
  • How To Use: Place food in the mill and keep rotating the handle clockwise to push food through the mill. When needed, reverse the rotation direction to reposition the food inside..
  • 100% Satisfaction: our convenient and easy-to-clean Stainless Steel kitchen mill is backed by our unconditional 30-day money back. If you are not 100% thrilled with your prograde food mill, we will offer you a full ref....
Check Stock

8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm

  • 2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
  • Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
  • Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
Check Stock