ReviewsDouble Extrusion Plant

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

15 inch Neoprene Laptop Carrying Bag Chromebook Case Notebook Ultrabook Bag Tablet Travel Cover with Handle Zipper Carrying Sleeve Case Bag Fits 14 15 15.4 inch Netbook / Laptop (Mandala)

  • SUPER SOFT NEOPRENE MATERIAL:Our HEABPY Laptop Carry Sleeve Case Bag is make of Soft neoprene material,It has Outside handle. which is lightweight and comfortable,Waterproof breathable,it will fully protect your Laptop surface from being scratched, scraping, extrusion and so on..
  • DOUBLE ZIPPER HAS OUTSIDE HANDLE DESIGN:Our HEABPY Laptop Carry Sleeve Case Bag is Double zipper design,It has Outside handle.Fully protect your computer from being scratched, splashing water, extrusion and so on..
  • LAPTOP SLEEVE CASE BAG DIMENSION:Our Laptop Carrying Sleeve Case Bag About 39cm(15.4 inches) x 28cm( 11 inches) X2cm.
  • Compatible with : Most 11.6"/ 12"/ 12.1"/ 12.2"/13/13.5/14/14.4/15 inches Netbooks / Laptops / Notebooks..
  • NON-TOXIC AND WATERPROOF:This neoprene laptop bag is 100% safe and non-toxic, Waterproof feature protects your Chromebook from little rains or unexpected spills, and it is very easy to clean..
  • SATISFACTION CUSTOMER SERVICE :If there're any problem (man-made damage not included) of the item you received, please feel free to contact us firstly by email, we will help you out promptly and positively..
Check Stock

Der Rose 8 Pack Fake Plants for Living Room Decor, Artificial Plants Small Faux Plants Indoor for Home Bathroom Bedroom Farmhouse Kitchen Decor

  • 【Abundant Styles】These small fake plants have 8 different styles, different plant shapes to meet your various needs.
  • 【Suitable Size】Each fake plant is 7.1in high and 4.7in wide, and the compact size is suitable for any place in the bedroom, living room, bookshelf, bathroom, etc. It is your perfect life partner.
  • 【Realistic Design】Imitate the real eucalyptus, grass, rosemary, our fake plants for bathroom is lifelike, evergreen, no watering, no maintenance, it is your perfect life partner.
  • 【Preferred Gifts】Exquisite packaging and beautiful、 practical arificial potted plants are ideal for gifting to your friends or family, especially your mother.
  • 【Usage Reminder】After a long time of extrusion and transportation, decorative plants will inevitably be deformed. After receiving the goods, please fiddle with office plants to achieve your most satisfactory appearance.
  • if you have any questions, please email us.
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

14 15 15.4 15.6 inch Laptop Handle Bag Computer Protect Case Pouch Holder Notebook Sleeve Neoprene Cover Soft Carrying Travel Case for Dell Lenovo Toshiba HP Chromebook ASUS Acer (Galaxy)

  • SUPER SOFT NEOPRENE MATERIAL:Our Laptop Carrying Sleeve Case Bag is make of Soft neoprene material,which is lightweight and comfortable,Waterproof breathable,it will fully protect your Laptop surface from being scratched, scraping, extrusion and so on.
  • DOUBLE ZIPPER DESIGN: Our Laptop Carrying Sleeve Case Bag is Double zipper design,fully protect your computer from being scratched, splashing water, extrusion and so on.
  • MACHINE WASHABLE: Our Laptop Carrying Sleeve Case Bag is Can be repeated cleaning, Mashine Washable,easy to dry, Never Fade.
  • It may be has some ink smell,please wash it and air it out for several days.Stylish & fashional design,same image on both sides,fashion your life . the color will never fade,you won't find a Laptop Sleeve Case Bag.
  • LAPTOP SLEEVE CASE BAG DIMENSION: Our Laptop Carrying Sleeve Case Bag About 39cm(15.35") X Width 28cm(11.02") X2cm.
  • Compatible with : Most 15"/ 15.4"/ 15.5"/ 15.6" inch Netbooks / Laptops / Notebooks , 15" Lenovo Dell Toshiba HP Chromebook ASUS Acer.
  • SATISFACTION GUARANTEE: Our Laptop Carrying Sleeve Case Bag is available in a variety of wonderful colors, This bag will last years, and if there's an issue, return for replace,no problems!.
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • ... All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models..
  • Support Printing Flexible and High Temperature Filament - With creality sprite extruder and up to 300°C and all metal hotend kit, the direct drive extruder supports 1.75 MM filaments, including PLA filament, TPU filament, PETG filament,....
Check Stock

15 inch Neoprene Laptop Carrying Bag Chromebook Case Notebook Ultrabook Bag Tablet Travel Cover with Handle Zipper Carrying Sleeve Case Bag Fits 14 15 15.4 inch Netbook / Laptop (14-15.4 inch, Galaxy)

  • SUPER SOFT NEOPRENE MATERIAL:Our RICHEN Laptop Carry Sleeve Case Bag is make of Soft neoprene material,It has Outside handle. which is lightweight and comfortable,Waterproof breathable,it will fully protect your Laptop surface from being scratched, scraping, extrusion and so on..
  • DOUBLE ZIPPER HAS OUTSIDE HANDLE DESIGN: Our RICHEN Laptop Carry Sleeve Case Bag is Double zipper design,It has Outside handle.Fully protect your computer from being scratched, splashing water, extrusion and so on..
  • MACHINE WASHABLE: Our RICHEN Laptop Carry Sleeve Case Bag is Can be repeated cleaning, Mashine Washable,easy to dry, Never Fade.It may be has some ink smell,please wash it and air it out for several days.Stylish & fashional design,same image on both sides,fashion your life..
  • DIMENSION: Our RICHEN Laptop Carry Sleeve Case Bag About 39.5cm(15.5 inch) x 29cm(11.4 inch) X2cm(0.787 inch).
  • Compatible with Most of Most 14"/ 15"/ 15.4" Netbooks / Laptops / Notebooks..
  • SATISFACTION CUSTOMER SERVICE :If there're any problem (man-made damage not included) of the item you received, please feel free to contact us firstly by email, we will help you out promptly and positively..
Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

  • 【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • 【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
  • 【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
  • 【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....
Check Stock

11' 11.6' 12' 12.1' 12.5' inch Laptop Carrying Bag Chromebook Case Notebook Ultrabook Bag Tablet Cover Neoprene Fit Samsung Google Acer HP DELL Lenovo Asus (11 11.6 12.1 12.2 inch, Cute Unicorn)

  • SUPER SOFT NEOPRENE MATERIAL:Our Laptop Carrying Sleeve Case Bag is make of Soft neoprene material,which is lightweight and comfortable,Waterproof breathable,it will fully protect your Laptop surface from being scratched, scraping, extrusion and so on.
  • DOUBLE ZIPPER DESIGN: Our Laptop Carrying Sleeve Case Bag is Double zipper design,fully protect your computer from being scratched, splashing water, extrusion and so on.
  • MACHINE WASHABLE: Our Laptop Carrying Sleeve Case Bag is Can be repeated cleaning, Mashine Washable,easy to dry, Never Fade.
  • It may be has some ink smell,please wash it and air it out for several days.Stylish & fashional design,same image on both sides,fashion your life . the color will never fade,you won't find a Laptop Sleeve Case Bag.
  • LAPTOP SLEEVE CASE BAG DIMENSION: Our Laptop Carrying Sleeve Case Bag About 32cm(12.6 inch) x 24cm( 9.45 inch) X2cm.
  • Compatible with : Most 11.6"/ 12"/ 12.1" 12.2" inch Netbooks / Laptops / Notebooks 11.6" inch Apple Macbook Air,Samsung Google 11.6" Chromebook,Acer Aspire S7/Acer C7 Chromebook Tablet PC.
  • SATISFACTION GUARANTEE: Our Laptop Carrying Sleeve Case Bag is available in a variety of wonderful colors, This bag will last years, and if there's an issue, return for replace,no problems!.
Check Stock

3pcs 500ml Plastic Safety lab Wash Bottle,Squeeze Bottle with Scale Labels (16 oz/3 Bottle).

  • 3 pcs squeeze bottles 500ml/16oz, watering machine commonly used for irrigation by multi-meat plants or washing labware..
  • Soft plastic production, translucent state, through extrusion to allow water to flow out..
  • Slim water pipe, easy to grasp the direction, if the water flow is small, can adjust the shear port part..
  • The bottle body is marked with a scale to make it easy to know how much water has been poured to prevent the plant from being watered..
  • Vertical nozzle design, water can reach the root directly, avoid touching the leaves, non-toxic tasteless health and environmental protection..
Check Stock