ReviewsDouble Flanged 90 Bends

Capri Tools Tube Bender, 1/8, 3/16 and 1/4 in. (CP21105)

  • Easily make tight bends on round small-diameter copper, brass, and aluminum tubing.
  • Use with tubing with 1/8, 3/16, and 1/4 in. outer diameter.
  • Bend tubing from 0-120 degrees. Reference marks at 45 and 90 degrees for accurate bends.
  • Compact design lets you work easily in tight spots.
Check Stock

Gardner Bender B1000PT PORTABLE CYCLONE AND POWER DRIVER KIT

  • Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
  • Attaches to almost any pipe threader to use as a bending power source.
  • Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.
Check Stock

Flowmaster 15902 3in Universal Tailpipe Kit

  • This Universal Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability, 18-Gauge Piping Walls.
  • 18-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 2 X 48″ Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
  • Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

DIY Water Cooling PETG Hard Tube Bending Kit for 16mm OD Rigid Tubing Hose

  • DIY bending tools for 16mm OD PETG rigid tubings / hose..
  • Includes Mandrels for 45/90/180 degree bends.
  • Silicone rod insert prevents kinks and to help promoting smooth bends while keeping inner wall diameter.
  • Recommended to use soapy water assists with tube insertion and tube heating..
  • Pre-drilled holes allow easy mounting of mandrels to flat surface.
Check Stock

Homyl 3 inch V-Band Downpipe Low Profile 90 Degree with Flex Bellow Pipe

  • 100% stainless with stainless V-band flanged on both ends and dual stainless O2 bungs..
  • 3" V-band downpipe low profile 90 degree with flex section..
Check Stock

3'' Mild Steel Custom Exhaust Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal 8PCS

  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls.
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 2 X 48″ Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
  • Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

Mid Valley - 3'OD DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-bend Kit Set of 16

  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation..
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • Package Included 4 x 48″ Straight Pipes 4 x 90 Degree Pipes 4 x 45 Degree Pipes 4 x 180 Degree U-Bends As our pics shown.
Check Stock

BETTERCLOUD 3 76mm OD T-304 Stainless Steel Straight 45 90 Degree Bend Exhaust Tube Pipe Kit

  • This Universal T304 Stainless Steel Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability,....
  • You Will Receive (2 Packages) Totally 16 Pieces Of 16-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 4 X 48" Straight Pipes, 4 X 90 Degree Pipes, 4 X 45 Degree Pipes, 4 X 180 Degree U-Bends.
  • Each 2.5" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER With ISO/TS 16949 Credentials, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

2'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend

  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls.
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 4 X 40" Straight Pipes, 4 X 90 Degree Pipes, 4 X 45 Degree Pipes, 4 X 180 Degree U-Bends.
  • Each 2" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

3 Inch Universal T304 Stainless Steel Exhaust Pipe Tubing Kit Custom Straight U Bend 45 & 90 Degree Mandrel 8PCS

  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls.
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 4 X 48″ Straight Pipes, 4 X 90 Degree Pipes, 4 X 45 Degree Pipes, 4 X 180 Degree U-Bends.
  • Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

RIDGID 36117 403 Instrument Bender, 3/16-inch Tube Bender for Bends Up to 180 Degrees, Pipe Bender,Black/Silver,Small

  • Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06 inches (1.5 mm) to a maximum of 180 degrees.
  • Made with offset cushion grip handles for improved comfort when forming 180-degree bends.
  • A 90-degree start angle and unique oil-absorbing shoe minimizes bending effort while forming accurate bends.
  • Features measurements in both inches and millimeters.
  • Tube bender has a 3/16-inch tube size outside diameter capacity and 5/8-inch bend radius.
Check Stock