ReviewsDouble Flute End Mills

RedLine Tools - 3/32 (.0938) Single End Corner Radius Carbide End Mill, Amorphous Diamond Coated Coated, 3 Flute .1390 LOC .0150 Radius, Round Shank Type, 2.5000 OAL - RET7934

  • 3 flute design for smoother/quieter milling operations High Performance ideal for pocketing steel, titanium and exotic alloys Ideal for long reach peripheral milling Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

40Pcs End Mill Bits Set 1/8\ Shank, Mcwdoit CNC Router Bits Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits

  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance..
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs..
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
  • 【Parameter】Overall Length（OAL）: 38mm.
Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 6mm/0.23".
  • [Single Flute End Mills]: 5 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 3.175mm 1/8”.
  • [Single Flute End Mills]: 10 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • Offer a smooth cutting surface and chip clearing.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

Niagara Cutter - CM490-0.250-D1-C.0-Z4 17004752 Carbide Chamfering Mill TiAlN Coated 4 Flutes 90 Degree Chamfer End 1/8 Cut Cutting Length 1/4 Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CM460-0.500-D1-C.0-Z4 17004750 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 7/16' Cut Cutting Length, 1/2' Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CM460-0.250-D1-C.0-Z4 17004748 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 3/16' Cut Cutting Length, 1/4' Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - C430-0.188-D7-S.0-Z4 N85729 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 3\ Overall Length, 0.188\ Cutting Diameter, 0.188\ Shank Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate General purpose end mill for working all types of materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CSD430-0.375-XD2-S.0-Z4 17006425 Carbide Square Nose End Mill, Double End, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2.5' Overall Length, 0.375' Cut Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate General purpose end mill for working all types of materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
  • Item Package Dimension: 2.899999997042" L x 0.699999999286" W x 0.599999999388" H.
Check Stock

MNKNENG 8 Set 1/4 inch End Mill Bits 4 Flute Straight Milling Cutter HSS-AL CNC Square Nose End Mill Bits Straight Shank Drill Bits for Wood, Steel, Titanium(6.35mm,4T) 1

  • Dimensions ---- Shank diameter: 1/4inch / 6.35mm.
  • Strong and Durable ---- Milling cutter is made of HHS-AL material, it is high-wearable and has a long life.
  • Smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance..
  • Sharp Edge ---- The design of 4 flutes, sharp edge, and superior wear resistance at high cutting speeds.
  • Durable, high precision and not easy to break.
  • easy installation and improved work efficiency..
  • Application ---- 1/4 inch end mill bits are suitable for side milling, end milling, finish machining, etc. For carving, cutting, engraving, milling in materials like die steel, carbon steel, alloy steel, cast iron, tool steel, titanium, aluminum, rosewood, density board, wood, acrylic, PVC, MDF etc..
  • Package Contents ---- 8pcs 1/4” end mills, each is individually packed in a plastic storage box..
Check Stock