ReviewsDouble Threaded Shank

BOSCH SF3001 3 In. Self-Feed Drill Bit

  • 7/16 In. hex shank for reduced slippage (3 In. and larger three-flat shank).
  • Chip lifters and spurs can be re-sharpened to maximize bit life.
  • Deep cutter gullets prevent stalling and provide smoother drilling.
  • Replaceable threaded tip and hex key included.
Check Stock

Northwestern Tools Inc SUS-70 Steel Equal-Thread Length Setup Stud 1/4-20 Thd., 3 Inch Overall lgth. (L)

  • Price For: Each System of Measurement: Inch Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: 5/16"-18 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Thread Size: 5/16"-18 Overall Length: 5" Thread Length (A): 1-3/4" Thread Length (B): 1/2".
  • Thread Length Type: Unequal Workable Length: 3-1/4" Country of Origin (subject to change): United States.
Check Stock

Northwestern Tools Inc SUS-12 Steel Equal-Thread Length Setup Stud 3/8-16 Thd., 8 Inch Overall lgth. (L)

  • Price For: Each System of Measurement: Metric Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: M8 x 1.25 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Thread Length (A): 35mm Thread Length Type: Equal Overall Length: 140mm.
  • Workable Length: 105mm Thread Length (B): 35mm Country of Origin (subject to change): United States.
Check Stock

Danco 89478 DANCO Rust Resistant Sink Hole Cover, 1-3/4\

  • DISCREETLY COVER SINK HOLES - Brushed Nickel finish provides stylish look to the sink plug in order to hide extra kitchen sink holes.
  • RUST RESISTANT - Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures.
  • EXTRA DEFENSE - Removed post style basket with kitchen sink hole cover catches unwanted debris.
  • DIMENSIONS: 3-inch long shank x 1-3/4 inch outer diameter flange. Threaded 1/2 inch shank design..
  • STYLISH DESIGN: Smooth flange cover in a brushed nickel finish provides an aesthetic that will match your current kitchen appliances.
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

Disston 1 1/2' Threaded Spade Bit 10X Faster than standard spade bit, 6' long, E0102691

  • Blu-Mol Xtreme Threaded Spade Bits 10X Faster than the standard spade bit.
  • Threaded Tip for fast effortless drilling and twin spurs for cleaner holes.
  • Coating that prevents rust and extends the life.
  • Hex shank for Quick Change and no slipping.
Check Stock

CURT 45832 D-Ring Shackle Mount Trailer Hitch, Fits 2-Inch Receiver, 13,000 lbs

  • DEPENDABLE STRENGTH. This D-ring ball hitch is constructed from high-strength forged steel and rated for a straight-line pull of up to 13,000 pounds (limited to lowest-rated towing component).
  • VERSATILE USE. This forged trailer hitch ball mount with D-ring comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The shackle features a threaded pin to remove if necessary.
  • READY TO TOW. Recovery towing is easy with this 2-inch shackle mount. It can be used for pulling another vehicle, stumps and other offroad applications.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this D-ring hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

Renekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill

  • DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
  • HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
  • UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
  • INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..
Check Stock

Yakamoz 2Pcs 2-Inch Roloc Sanding Discs Holder Roll Lock Disc Pad Quick Change Adapter with 1/4 Shank

  • Heavy-duty rubber pad, aluminum core with nickel-plated removable steel shank.
  • Compatible with 2-Inch Sanding Disc, Shank diameter: 1/4 inch, Maximum RPM: 30,000.
  • Threaded pad backs screw tightly onto the mandrel, and allow for quick and easy changes..
  • Accepts sanding, polishing, surface conditioning/preparation, bristle and other disc consumables.
  • The high quality aluminum and the long-lasting rubber will provide sturdiness and strength.
Check Stock

EVNSIX Dp16 PA14-1/2 Bore22 No. 1-8 Involute Gear Cutters+ 7/16 Inch 22mm R8 Shank Milling Arbor Gear Mill Cutter Holder Machine

  • Set 8 Pcs Dp16 ：pressure angle: 14.5 degree.
  • R8 shank gear cutter holder fitting for hole 22mm gear cutter.
  • R8 shank gear cutter threaded 7/16(Inch).
Check Stock

Crossarctic 2 Inch Sanding Discs Holder Roll Lock Disc Pad Quick Change Disc Adapter with 1/4\ Shank for Die Grinder Power Drill Driver

  • Heavy-duty rubber pad, aluminum core with nickel-plated removable steel shank.
  • Compatible with 2-Inch Sanding Disc, Shank diameter: 1/4 inch, Maximum RPM: 30,000.
  • Threaded pad backs screw tightly onto the mandrel, and allow for quick and easy changes..
  • Accepts sanding, polishing, surface conditioning/preparation, bristle and other disc consumables.
  • The high quality aluminum and the long-lasting rubber will provide sturdiness and strength.
Check Stock