ReviewsDouble ended Countersink And Deburr Tool

RIDGID - 41608 RIDGID PTEC 30000 Tubular Tailpiece Extension Cutter, 1-1/4\

  • Executes clean, fast and straight cuts on polyethylene (PE), polypropylene (PP), and thin-wall PVC tubes.
  • This cutter automatically deburrs in parallel to the cutting action so there's no need for a second tool to deburr.
  • Automatic beveling allows for immediate, easy joining to other sink drain pieces.
  • The open bore design allows cutting of double-flanged plastic drain pipe.
  • Tubing cutter has a 1-1/4-inch single-flanged or 1-1/2-inch double-flanged outer diameter capacity.
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • ... include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case folds up neatly and is convenient to travel with on different job sites and locations..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

Adjustable Countersink Drill Bit, Self-Adjusting Depth Control Without Wrench, Preventing Scratches Or Marks by Stopper Mounted Bearing, Tungsten Carbide Tipped Counterbore - 1/8\x5/16\(3x8mm)

  • 【Depth adjustment does not require a wrench】 - It is an easy, quick and accurate tool to adjust the depth by turning the knurl by hand without a wrench. We made these woodworking tools in Korea.
  • Ezenkorea adjustable depth countersink drill bit. And we have gotten a patent in five countries.
  • the United States, Korea, Japan, China, and Taiwan..
  • 【To Prevent Scratches On The Surface】 - After processing the wooden hole, Ezen countersink bit only goes into a predetermined depth, so anyone can work stably. In addition, even if the drill continues to spin, the built-in stopper does not turn, thereby preventing scratches on the wood surface. This ezen countersink adjustable drill bit is the best product to drill diagonal and straight lines..
  • 【Quick Set Up The Wood Working Depth】 - Depending on the finishing depth of the screw work and the thickness of the wood, you can set the work depth as fast as desired. The hole depth of wood can be kept constant. This is an advantage of our product that cannot be found in other wood working tools and equipment..
  • 【Replaceable Center Bit And Body】 - To replace the countersink body or to reassemble the product after disassembling, rotate the retaining ring and connect it to the body. Then rotate until the marke....
Check Stock

NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel

  • PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
  • M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
  • FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
  • BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
  • BIT SIZES: Each countersink tool set contains 1/4.
Check Stock

External Chamfer Tool Stainless Steel Remove Burr Tools, 6pcs Countersink Drill Bit, 4 Piece Deburring Metal Wood Drill Bit Set, 90 Degree Center Punch Tool Sets for Wood Quick Change Bit

  • High Speed Steel Material - Made Of Hss Material With Titanium Coated, Different Sizes To Meet All Your Needs, Suitable For Diy, Home And General Building/Engineering Using..
  • 4Pcs Countersink Chamfer Tool - 4 Different Sizes: 2-5Mm,5-10Mm, 10-15 Mm, 15-20Mm, Ideal For Cutting Through Metal, Wood And Plastic (Hardness .
  • Package Includes - 4 X Countersink And Deburring Tools, 1 X Deburring External Chamfer Tool, 6 X Countersink Drill Bit, Ideal For Wooden Planks, Fiberboard, Particle Board, Plywood, Plastic, Alumiumn Board Etc..
  • Common sizes used for carpenters, cabinet, furniture makers and other woodworking trades.
Check Stock

DEWALT Drill Bit, #6 Countersink, 9/64-Inch (DW2537)

  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
  • Replacement tapered bits offered. Product consist of Drill Bit Only no tool holder.
Check Stock

Woodworking Chamfer Drilling Tool Step Countersink Drill Bit Set for for Glass Metal 9PCS Drill

  • The Chamfer Drilling Tool is made of high-speed steel, titanium-plated, practical and durable.
  • There are 3 step drill bits and 6 Countersink drill bits in the package.
  • Countersunk bit set is suitable for quick change, suitable for most power tools with 0.64 cm hex shank.
  • Countersink Drill Bit Set is suitable for chamfering various materials, such as wood, plywood, aluminum, iron, copper, fiberboard, particleboard, plastic, PVC board, etc..
  • Automatic manual Chamfer Drilling tool with spring load mechanism, suitable for wood, metal and other materials.
Check Stock

QuikDrive PRO300SD25K - Auto-Feed Deck System w/ 120V DW 2500 RPM Motor

  • Expanded depth settings for high-density flooring materials.
  • Reversible and replaceable non-skid teeth.
  • Uniform toenailing and countersink on slick surfaces.
  • Sure-grip guide tube increases stability for a broad range of screws.
  • Patented curved collation strips hold the screws up and away from the work surface, making moving and positioning the tool easier.
  • they are also pointed on the inserted end to simplify loading.
Check Stock

HHIP 5000-3125 60 Degree M42 8% Cobalt Combined Drill and Countersink, 1/8\ Drill Diameter, 5/16\ Body Diameter, 2-1/8\ OAL, 4

  • Used for centering work ends where the work piece is to be revolved on machine centers.
  • 60 Degree countersink angle fits all standard centers.
Check Stock

AIYOO 2 Pack Deburring External Chamfering Tool Deburring Tool for Metal High Speed Stainless Steel Bolt Deburring Tool Quickly Repairs Damaged Metal Drill Bit Triangle Shank

  • High-quality hard steel: The bolt deburring tools made of stainless steel, with high strength and hardness, durable, rust-proof, and corrosion-resistant, accompany you for a long time. And reusable, as sharp as ever, never dull..
  • Safe and efficient: High-strength, high-hardness deburring outer chamfering tools can easily scrape the outer edge of bolts, pipes, or bars to remove burrs. Quickly repair damaged bolts and tighten nuts in place without hurting hands, sparks, or burns.
  • Repair Damaged Threads: The chamfer tool can quickly repair damaged threads on steel bolts, creating a small 45° chamfer that does not alter the pitch and does not create a tip..
  • Simple operation: Attach the deburring outer chamfering tool to the end of the power drill, use the lowest speed on the drill bit, and apply light pressure to deburr. This tool simplifies the repair process, reduces repair time, and eliminates the need to replace expensive or hard-to-find hardware, making it a great addition to your industry and home..
  • Versatile: The deburring tool is suitable for applications including stainless and hardened steel, threaded rods, copper, brass, aluminum, plastic, and wood. And the copper pipe deburring tool is compact and portable, making it easy t....
Check Stock