Patriot Signature 4 GB PC3-10600 (1333 MHz) DDR3 Desktop Memory PSD34G13332
- Non-ECC Unbuffered 240-Pin 2 Rank Double-sided in-line memory module.
- PCB height: 1181(mil) and 1.5V Power Requirement.
- 100% Tested, RoHS Compliant, JEDEC Compliant.
ReviewsDouble side Pcb
SUPERNIGHT LED Light Strip Warm White 4000K Temperature IP65 Waterproof 16.4ft 300leds SMD 5050 Rope Lights for Bedroom Boat Window TV-Backlighting Christmas
- 【SMD 5050 LED Rope Lights】There are 300pcs leds on 16.4ft flexible board.On the back of tape,there is double-side adhesive tape which can help you....
- 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
- Also you can use other strip tools to connect more....
- 【IP65 waterproof PCB】This 5M length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to protect....
- 【Easy to instsall】Strong adhesive tape on the back of the tape can help you easy to install the strip. Please make sure the surface is dry,....
- 【4000K Temperature VS 3000K Temperature】Our this warm white strip with 4000K Temperature will be brighter than LED strip with 3000K warm white....
RF Mixer, Passive Frequency Transducer Module RFout=DC?1.0GHz Diode for Demodulator for Phase Comparator
- The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
- The interior is composed of double balanced microwave diodes, come with high reliability.
- The product have large heat dissipation area, possess stable operation and long running time.
- Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
- 35dB high isolation between local oscillator and RF input, which is stable and reliable.
GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space
- Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.This is DIY kit,after you....
- Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some....
- This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to....
- PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
- There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering....
RF Mixer, RFin=1.5‑3.8GHz Converter Double Balanced Frequency Transducer Module for Phase Comparator for Demodulator
- The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
- Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
- The product have large heat dissipation area, possess stable operation and long running time.
- The interior is composed of double balanced microwave diodes, come with high reliability.
- 35dB high isolation between local oscillator and RF input, which is stable and reliable.
Double Balanced Frequency Transducer Module, RF Mixer Diode RFout=DC‑1.0GHz for Phase Comparator for Demodulator
- The product have large heat dissipation area, possess stable operation and long running time.
- The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
- 35dB high isolation between local oscillator and RF input, which is stable and reliable.
- Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
- The interior is composed of double balanced microwave diodes, come with high reliability.
Patriot Signature 8GB DIMM DDR3 CL11 PC3-12800 (1600MHz) PSD38G16002
- 7.8US Refresh Interval (8192 CYCLES/64MS).
LANTRO JS 5pcs EMC EMI Near Field Probe Set, Near Field Magnetic Field Probe, Anti Interference RF Explorer SMA Conductive Radiation Test Antenna Kit, SMA Male Thread
- Product Material----PCB adopts 1.6mm thick double‑sided board, 1.5 oz copper thickness, and the whole process of spraying tin to make sure good passing performance of large and small currents..
- Fully Shielded Magnetic Field Probe----Greatly suppresses electromagnetic clutter interference in the external environment, improves the dynamic range of the entire system, and helps to improve the accuracy of position detection..
- Function----Phase noise and spectrum components can be combined with a low‑noise preamplifier for measurement. It can help you find and identify potential sources of interference within the components of electronic components..
- 5PCS Probes---- There are 5pcs probes, can meet your use and replacement needs, convenient and practical. Small size, with case, easy to carry and store..
- Note----When using, the PCB board should not be touched by hands ,Vertical use at frequencies exceeding 2 GHz..
MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4
- These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
- The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
- They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
- Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
- Please read the measurements before ordering if you are concerned about the size..
MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 20mmx80mm, Black Pack of 5
- These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
- The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
- They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
- Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
- Please read the measurements before ordering if you are concerned about the size..
RF Mixer, RFin=1.5‑3.8GHz Passive Low Noise Frequency Transducer Module 8.0dB Conversion Loss for Phase Comparator for Demodulator
- The product have large heat dissipation area, possess stable operation and long running time.
- The interior is composed of double balanced microwave diodes, come with high reliability.
- Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
- The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
- 35dB high isolation between local oscillator and RF input, which is stable and reliable.