ReviewsDovetail Router

Micro Jig MB-050-0514 MATCHFIT Dovetail Router Bit For Dovetail Clamps 14° ½” Dovetail Profile Yellow

  • Rout incredibly clean dovetail grooves and requires less sanding.
  • Perfect fit for the matchfit dovetail Clamp system.
  • Evacuate chips and dust, reducing friction, and heat, resulting in cleaner cuts..
  • 14-Degree, ½” profile with unique rounded corners for smoother grooves.
  • Router collet safety line shows how deep into the collet the bit should be.
Check Stock

MATCHFIT MB-025-0514 Dovetail Router Bit 1/4 Shank Yellow 14-Degree by 1/2 Dovetail with 1/4 Shank

  • Rout incredibly clean dovetail grooves and requires less sanding.
  • Perfect fit for the MATCHFIT dovetail Clamp system.
  • Evacuate chips and dust, reducing friction, and heat, resulting in cleaner cuts..
  • 14-Degree, ½” profile with unique rounded corners for smoother grooves.
  • Router collet safety line shows how deep into the collet the bit should be.
Check Stock

Dremel 231 Portable Rotary Tool Shaper and Router Table- Woodworking Attachment Perfect for Sanding, Shaping, and Trimming Edges

  • CONVENIENT: Quick-change template guide adapter for fast toolless change.
  • FUNCTIONAL: The Bosch RA1128 Router Guide Features a Versatile Array of Six Popular Router Template Guides Including Large and Small Dovetail Router Guides and Two Radius Hinge Guides.
  • USE WITH: Works with Bosch routers and plunge bases for Bosch palm routers.
  • VERSATILITY: The RA1100 interface piece allows the template guide adapter to accept common threaded template guides and reducer inserts that fit into a 1 to 3 8 Inches counter bore.
  • ORGANIZE: Template guides come in a rugged, portable carrying case for worksite organization.
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Wolfride 2Pcs Dovetail Router Bits 1/4 Inch Shank Dovetail Joint Router Bit Set with Bearing for Woodworking Cutter

  • Package includes: 2pcs 1/4" shank Dovetail Bits with bearing..
  • Black Router Bit - Cutting Length: 1/2''.
  • Yellow Router Bit - Cutting Length: 5/8''.
  • Made of hard alloy, create smooth and clean cut..
  • Suitable for wood, MDF, particle board, plywood,etc..
Check Stock

11-Amp 2 HP Fixed-Base Wood Router with Edge Guide, 1/2-Inch, 3/8-Inch and 1/4-Inch Collets and Carrying Bag

  • POWERFUL & EFFICIENT: 11-Amp motor produces 2 peak horsepower to handle a range of woodworking applications.
  • This router also features a 25, 000 RPM for the fastest and cleanest cuts. Easily tackles the tough hardwoods..
  • PRECISE DEPTH ADJUSTMENT: Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments. This router can be used for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting..
  • DURABLE & COMFORTABLE: The motor housing and bases are made of aluminum, and the power switch is completely dust-sealed for added durability.
  • Rubber molded handles provide you with superior comfort, balance, and control, even during extended jobs.
  • GREAT COMPATIBILITY & EDGE GUIDE: Accepts all 1/4, 3/8 and 1/2-inch router bits.
  • The included edge guide lets users route perfectly straight lines, helping to create grooves along the workpiece.(The router itself is equipped with a 1/2' collet chuck, extra 3/8'' & 1/4'' collets are packed in the carrying bag.).
Check Stock

Rockler Ellipse Router Circle Cutting Jig – Easy to Use Circle Router Jig to Make Picture Frames Mirrors - Plunge Router Jig Includes Jig Arm Two Dovetail Keys and More

  • Router Circle Jig: The Rockler ellipse circle cutting jig helps you easily create perfect circles, ellipses, and sweeping arcs with your mid-size or....
  • Fit With Most Routers: Our router sign making jig can be drilled to fit most routers with a 6” base. With your router and this handy, easy-to-use....
  • Easy To Use: Setting up the wood cutting jig takes only a couple of minutes and is virtually math-free. Using this jig is so easy, as you move the....
  • 52” Cutting Diameter: The circle jig has a single pivot can be locked to make circles up to 52" diameter (Minimum circle diameter 9-1/4"). Our....
  • What’s Included? This Rockler router circle and ellipse jig includes jig arm, jig base, two dovetail keys, and two locking pivots. Pre-drilled for....
Check Stock

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

  • 【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
  • 【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
  • 【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
  • Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
  • 【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
  • 【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
  • perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded carrying case for easy transportation, safe storage, and simple organization.
  • Each compartment has a sizing label for quick identification.
  • CONTENTS: Package includes (8) guides + (2) lock nuts + (1) carrying case for your convenience.
Check Stock

QWORK T-Track Hold Down Clamp Kit, 4 Pcs M6 T Track Clamps Compatible with 3018-PRO/3018-MX3/3018-PROVer CNC Router Machine

  • Next Generation MATCHFIT Dovetail Clamps with 8.5" capacity, Anti-Pivot Technology, and X-Pad Accessory.
  • Dynamic X-Pad Accessory gives your 2-in-1 hold down and inline clamping pressure.
  • Anti-Pivot technology keeps the clamp arm in place when switching out work and doesn't get in the way.
  • 8.5" length and clamping capacity for your bigger projects.
  • Route your own clamp tracks with a standard 14° x 1/2" dovetail router bit and build jigs like never before.
Check Stock

Compact Wood Palm Router Tool Hand Trimmer Woodworking Joiner Cutting Palmming Tool 30000R/MIN 650-800W 110V with 12PCS 1/4" Router Bits

  • ...le with anti-skid pad. Get out of DIY like a beginner..
  • 【Purpose】 It can be widely used for chamfering, grooving, trimming, drilling, carving characters, arranging processing, etc..
  • 【What's in the Box】- 12PCS 1/4" Shank Router Bits Set【Including 6mm/12mm/16mm Straight bits,12.7mm 90°"V" Grooving bit,12.7mm Dovetail bit,32mm 45°Chamfer bit, 12.7mm Dovetail bit, 32mm 45°Chamfer bit, 12.7mm Flush trim bit,R6.3mm/R9.5mm Round over bit, R6.3mm Core box bit,R6.3mm Core bit,R4mm Roman ogee bit.】 1x Palm Router, 1 x Straight Guide, 1 x Trimming Guide, 2 x Wrenches, 6 x Carbon brushes, 1x Sample Guide Plate, 1 x Adjustable Button, 1 x Fast Switch Button, 1 x Manual..
Check Stock