ReviewsDown Hole Drill

Auger Drill Bit 3x12inch Garden Auger Spiral Drill Bit Rapid Planter for 3/8" Hex Drive Drill - for Tulips, Iris, Bedding Plants and Digging Weeds Roots

  • Build to last: Made of heavy duty steel, with glossy black painted finish. The auger drill bit point on it hits the ground first and keeps it steady when you are digging hard grounds. Our patented design also makes the distance between the digging blade start and the point is the minimal, so auger drill bit will start working on hard ground without having to push down..
  • Size: 0.3 inch (8mm) steel shaft with non-slip hex drive 0.3inch(8mm).
  • 3-inch (8cm) diameter x 12-inch (30cm) length.Quickly digs holes up to 12 inches deep and 3 inches wide using the power of your hand held drill..
  • Save your time & Easy to use: our earth drill bit will work with any 3/8″ or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes.For cordless drills a minimum 14V drill is recommended.
  • Keep auger clean from soil and debris when not in use..
  • Multi-Purposes: our spiral hole drill is the best landscapers’ choice for increasing efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes.
  • Our earth drill bit is also effortlessly dig post holes or even bring it on vacatio....
Check Stock

Yin Yoga: The Foundations of a Quiet Practice

  • [SIZE] – 1mm diameter, 11mm length twist drill bit with 0.7mm shank..
  • [MATERIAL] – Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal..
  • [APPLICABLE MACHINE] – Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill..
  • [APPLICATION] – Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on..
  • [NOTICE] – When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

TCBWFY Auger Drill Bit 4x12inch Garden Plant Flower Bulb Auger Spiral Hole Drill Rapid Planter Earth Auger Bit Post or Umbrella Hole Digger for 3/8"Hex Drive Drill

  • Build to last: Made of heavy duty steel, with glossy black painted finish. The auger drill bit point on it hits the ground first and keeps it steady when you are digging hard grounds. Our patented design also makes the distance between the digging blade start and the point is the minimal, so auger drill bit will start working on hard ground without having to push down..
  • Size: 0.3 inch (8mm) steel shaft with non-slip hex drive 0.3inch(8mm).
  • 4inch (10cm) diameter x 12-inch (30cm) length.Quickly digs holes up to 12 inches deep and 4 inches wide using the power of your hand held drill..
  • Save your time & Easy to use: our earth drill bit will work with any 3/8" or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes.For cordless drills a minimum 14V drill is recommended.
  • Keep auger clean from soil and debris when not in use..
  • Multi-Purposes: our spiral hole drill is the best landscapers’ choice for increasing efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, p....
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

NUNGT 3PCS Auger Drill Bit Set for Planting, Bulb Planting Auger for Drill, Garden Auger Spiral Drill Bit, Auger Umbrella or Post Hole Digger for 3/8 inch Hex Drive Drill

  • 【STURDY AND DURABLE】 Made of heavy-duty steel and the surface is coated with high-quality black paint. Our auger drill bit set is wear-resistant, sturdy and durable, Maintain excellent performance for a long time in working with hard dirt, clay, rocky soil, sand, etc. It works with any 3/8" or larger chucked drill, and we suggest that use 18V or greater drill with adjustable drill chuck..
  • 【EFFICIENT AND TIME-SAVING】 The garden spiral hole drill planter adapt to dig holes and loosen the soil, it 's more efficient compared with traditional shoves, saving you a lot of time and energy. The auger drill bit for planting can protect your knees and back because you don't have to kneel down or bend over to drill like before, make you work easier..
  • 【VARIOUS APPLICATIONS】 The auger post hole digger not only widely used for planting bulbs, potted plants, vegetables, flowers, bare-rooted trees and shrubs, fence posts, mixed seeds, fertilizers and paints. It's also used to drill holes in the sand to secure beach umbrellas, drill holes for fixing tents when camping, drill ice holes for fishing..
  • 【WHAT YOU GET】 Contain 10 pcs plant labels and 3 different size drill bits. 1.6”x 9” for drilling holes to install smaller plant stakes and ventilate the r....
Check Stock

NEIKO 10198A Step Drill Bit Set | 5 Piece, 4mm- 35mm | Metric Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits, 135 Degree Point

  • 135° SPLIT POINT TIP: Each step down drill bit is made with high strength HSS and is black and cobalt-treated for added durability to ensure long service life and longevity. The design of the tip angle increases cutting speed with self-centering and prevents walking off the surface of workpiece..
  • 2 FLUTE DESIGN: This metric stepper drill bit has a two-flute design that clears chips faster, smoother, and allows particles to escape easily making cleaner holes at any worksite..
  • TRI-FLATTED SHANK: Each unibit optimally fits into power tools such as impact drill chucks securely and eliminates slip for higher efficiency of output..
  • HSS COBALT STEP BIT: This step up drill bit set cuts through steel, sheet metal, wood, plexiglass, enlarges a hole, and other surfaces creating relatively clean holes with only a small amount of pressure and deburrs as you drill..
  • MULTIPLE HOLE DRILL BIT: 6 millimeter shank: (9 steps- 4, 5 , 6, 7, 8 ,9 10, 11, 12 mm),(5 steps- 4, 6, 8, 10, 12 mm) and 8mm shank (7 steps- 6, 8, 10, 12, 14, 16, 18 mm),(10 steps- 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm) and 10mm shank (13 steps- 6, 8, 10, 13, 16, 18, 20, 22, 25, 28, 30, 32, 35 mm)..
Check Stock

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 63mm 2-1/2\ inch Diamond Drill Bit Tile Hole Saw for Glass Ceramic Stone

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock