ReviewsDown Light Heatsink

60pcs Mini Heatsink Kit, Cooler Heat Sink for Cooling VRM Stepper Driver MOSFET VRam Regulators (8.8mmx8.8mmx5mm) Black

  • ✔black anodized aluminum heatsink， Exquisite workmanship, good heat dissipation, long service life..
  • ✔Small in size, light in weight, size: approx. 8.8 x 8.8 x 5mm(L*W*H).
  • ✔Can be applied for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips raspberry pi models pi electronics, computers, electrical appliances, and heat dissipation etc..
  • ✔60pcs Small Mini Heatsink Kit+1 thermal adhesive..
Check Stock

EKWB EK-M.2 NVMe Heatsink- Black

  • Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
  • Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
  • PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
  • PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock

Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)

  • The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+.
  • It can not work for Raspberry pi zero, because there is no pin header on zero.
  • Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm.
  • You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan.
  • This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

Cooler Master MasterAir MA620M Dual Tower ARGB CPU Air Cooler SF120R Fan Hexagon Strip ARGB Lighting 6 Heat Pipes Copper Plated Base for AMD Ryzen AM4 Intel LGA1200/1151 MAM-D6PN-120PA-R1

  • Dual tower heatsink – a combination of two sets of heatsink covers more surface area and 6 heat pipes uniform layout distributes heat over more evenly across heatsinks. Air flow - 53. 4 CFM. Noise level - 30. 0 decibels.
  • Uniform 6 pipe – a combination of two sets of heatsink covers more surface area and 6 heat pipes uniform layout distributes heat over more evenly across heatsinks.
  • Lighting badge – cm hexagon logo and embedded addressable RGB lighting strip provides unique perspective light effect.
  • New SF120R Fan – with silent driver IC and a wide range of speed settings, it can be used for silent operation or fine-tuned for maximum cooling performance.
  • Addressable RGB LED controller – the wired addressable RGB LED controller allows for customizable colors and effects with just the touch of a button..
Check Stock

uxcell COB LED Chip 600mA 1W Strip Light Lamp Pure White High Power 50mmx8mm Luminous Surface for Floodlight

  • Color Temperature:Pure white(6000-6500K).
  • Made of material, Long service life, low consumption, high brightness..
  • This LED chip needs a heatsink for cooling before power on. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
  • Widely used in the replacement of LED downlights, track lights, floodlights, flashlights, stage lights..
  • Note: This LED chip is used with constant current LED driver power supply, and cannot be directly powered by batteries or constant voltage power supply (switching power supply)..
Check Stock

uxcell COB LED Strip Light Lamp Chip 300mA 4W Pure White High Power 100mmx8mm Luminous Surface for Floodlight

  • Color Temperature:Pure white(6000-6500K).
  • Made of material, Long service life, low consumption, high brightness..
  • This LED chip needs a heatsink for cooling before power on. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
  • Widely used in the replacement of LED downlights, track lights, floodlights, flashlights, stage lights..
  • Note: This LED chip is used with constant current LED driver power supply, and cannot be directly powered by batteries or constant voltage power supply (switching power supply)..
Check Stock

uxcell COB LED Chip 300mA 3W Strip Light Lamp Pure White High Power 100mmx9mm Luminous Surface for Floodlight

  • Color Temperature:Pure white(6000-6500K).
  • Made of material, Long service life, low consumption, high brightness..
  • This LED chip needs a heatsink for cooling before power on. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
  • Widely used in the replacement of LED downlights, track lights, floodlights, flashlights, stage lights..
  • Note: This LED chip is used with constant current LED driver power supply, and cannot be directly powered by batteries or constant voltage power supply (switching power supply)..
Check Stock

GLOTRENDS M.2 Heatsink with M.2 Thermal Pad for 2280 M.2 PCIe 4.0/3.0 NVMe SSD (2 Packs)

  • 2 packs of M.2 heatsink fits for PS5/PC installation. 0.12inch/3mm high m.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent Rocket 4, Samsung 980 Pro, Samsung 970 Pro, Silicon Power US70, and etc..
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation..
  • 5°C- 20°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink can extend the life of M.2 PCIe SSD..
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low viscosity, thermal conductivity, and insulation..
Check Stock

Our Love is Our Power: Working with the Net of Light that Holds the Earth (The Grandmothers Speak Book 2)

  • ...l not cause wear to the host, and PS5 LED light ring kit has 8 colors and more than 400 light effects for you to choose from. You can choose the lighting mode that suits your game by adjusting the color, light speed, and brightness..
  • Protect your PS5 console from dust, PS5 Heatsink Barrier Pets Hair Anti-dust Cover Dustproof for PlayStation 5, You can enjoy the game environment better and spend a happy game time. No matter what kind of game, there is always an RGB LED mode suit for you..
  • PS5 Dust cover Suitable for families playing ps5 games in the environment with more pet hair or dust, If it is dirty, it can be washed and reused..
  • Dust Cover Net and RGB LED ring kit compatible with PlayStation 5 Optical Drive Version/Digital Version..
  • Easy to Assemble, ① Lift under the rear corner of the protective cover where the PS5 logo is located, and release the circular buckle. ② Push the cover down toward the bottom of the console, and the cover will slide off. ③ Paste the configured self-adhesive on the back of the led light ring and then fix it on the ps5 console. ④ Align th....
Check Stock

KCCCT LED Parking Lot Lights 150W Outdoor LED Shoebox Pole Lights 20400LM 5000K Commercial Area Road Lighting IP65 100-277Vac LED Street Commercial Light ETL&DLC Listed (Slip Fit Mount,No Photocell)

  • ...he shoebox lights uses new SMD 3030 LED modules that produce up to 136 Lumens per watt and maintain 90% light output for over 36K hours. Excellent Optics design, greatly improve the light utilization and evenness.Area pole lights replace 500W incandescent,energy Saving of up to 75%. save $4596.5 on energy bill..
  • ☀ HEATSINK & WIDE APPLICATION - very easy to install and cost-effective.Shoebox parking lot lights have good heatsink design.Ideal for outdoor applications such as flood light, security light, post light, street lights,area lights, parking lot light..
  • ☀EASY DIY INSTALLATION & UPGRADE: KCCCT LED area pole lights 21.1''x12.4''x2.8'', easy to install the parking lot lighting. High Power Factor 003e0.9, Low THD Driver.100%die-cast aluminum gasketed enclosure.Simple black appearance, surface anodized, without fading and corrosion.Anti-shock,anti-moisture,no glare,no strobe light,protecting your eyes..
  • ☀DLC/ETL & LONG LASTING IP65 Waterproof for all weather conditions,protective powder coating for lasting appearence.The Shoebox parking lot lights simply and low cost maintenance. LED area light has a 50,000 hour life span, which is approximately 14 years!10 times longer than traditional incandescent light, no bulb needed.Parking lot Lights eligib....
Check Stock