ReviewsDraft Faucet Lock

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

  • ...with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of the tower. These thermoplastic vinyl beer hoses remain flexible and durable at recommended temperatures and pressures, are unaffected by normal cleaning compounds, and will not rot, swell, or dry out..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense compon....
Check Stock

Kegco 3PHBK309B-2 Keg Dispenser, 2 Tap, Black

  • Kegco 3PHBK309B-2 Homebrew Kegerator comes complete with a stainless steel two faucet draft tower, two set of ball lock keg couplers, a two product dual gauge CO2 regulator, and an empty CO2 tank.
  • Large interior easily holds up to three home brew kegs and can also be used as a fermentation chamber or an all-refrigerator.
  • Digital temperature control and fan-forced cooling provides one of the largest temperature ranges on the market (32 to 75 degrees Fahrenheit).
  • Kegerator also features a chrome guard rail, easy-roll locking casters, and dishwasher-safe removable built-in drip tray for easy clean-up.
  • PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs.
  • it will not tap commercial D system kegs.
Check Stock

MRbrew Stout Beer Coffee Faucet, 304 Grade Stainless Steel Nitrogen Keg Draft Faucet, Homebrew Cold Brew Kegerator Beer Tower Tap with Standard Black Plastic Tap Handle

  • 【WHY MRbrew?FOOD GRADE SS304】Don't get fooled into buying a cheap chrome plated stout leaking faucet. You need all stainless steel components if you are serving coffee on draft due to the acidity of coffee. That’s why you need the MRbrew Nitro Stout Beer Faucet in 304SS.
  • 【EXCELLENT POURING&CREAMER DESIGN】The stout faucet features a pull forward to pour and push back for creamer design for perfect nitro pour. This is the Faucet you need to pour the perfect Nitrogen Stout. Pour your Guinness and Stouts like they should be with a true Stout Faucet!.
  • 【PERFECT APPLICABILITY】For dispensing Guinness, Murphy’s, Beamish and other nitrogen beers, If you order this faucet and decide to serve traditional style beers in the future, that’s no problem. You can easily remove the restrictor disc inside and attach a CO2 gas setup and this item is compatible with standard shanks and beers towers.
  • 【EASY TO GET THICK CREAMY HEAD】Unlike traditional-style draft beers that use CO2, stouts require nitrogen or mixed gas to achieve the smooth taste and creamy flavor. The body of the Nitro Stout Beer Faucet is narrower than normal beer faucets. This design, along with a special restrictor disc, powers the beer quickly through the faucet to create a thick, cre....
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit - No CO2 Tank - DTCK-542_NT

  • ...s constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult..
  • SINGLE FAUCET STAINLESS STEEL DRAFT BEER TOWER: Popular for outdoor or commercial applications, this top-of-the-line NSF approved 3″ diameter draft beer tower has a beautiful polished stainless steel finish and comes complete with a chrome plated brass faucet with solid brass lever. 5′ of 3/16″ clear beer tubing with nozzle and hex nut assembly and a mounting gasket with screws are also included for quick and easy setup..
  • HEAVY DUTY FAUCET WRENCH: Make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them..
Check Stock

Ferroday Stainless Steel Core Draft Beer Faucet Polised Beer Faucet for Keg Tap Tower Beer Shank and Kegerator(Beer Faucet)

  • Beer Faucet Construction :Won’t pit or tarnish,corrosion resistant and durable, prevent heavy metal pollution.
  • Body is made of brass,core is made of stainless steel.
  • Polished Interior: Smooth flow, less agitation and less foaming.
  • Used to attach beer and wine line to a faucet through wall, refrigerator door, cabinet, etc.
  • Package:1*Draft Beer Faucet+1* faucet handle.
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ...with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and convenient 5-1/4" length..
  • INCLUDES DETAILED INSTRUCTIONS: This conversion kit comes with easy-to-follow instructions and all of the draft dispense components you'll need to quickly and easily convert your refrigerator into a draft beer kegerator..
Check Stock

Kegco HBK209S-2 Keg Dispenser, stainless steel,2 Faucet without Kegs

  • INCLUDES COMPLETE KEG TAPPING KIT: With the direct draw kit included with this kegerator, all that will be left up to you is to fill the CO2 tank and provide the kegs of brew! The kit includes an upgraded dual faucet stainless steel draft tower, a CO2 tank with a red corrosion-resistant coating, and a premium dual gauge regulator at no additional charge to you, meaning you will get an extra $37 worth of value added to this kit..
  • LARGE INTERIOR: This keg beer refrigerator has a spacious interior that is large enough to hold up to three ball lock home-brew kegs. This allows you to dispense from two kegs while keeping a third cool for later. When you're not using this kegerator to dispense delicious home-brewed beer, it can be easily converted into an all-refrigerator for extra food and beverage storage. The two included adjustable shelves can be placed far enough apart to hold gallon jugs or 2-liter bottles..
  • SLEEK AND STYLISH DESIGN: A textured top surface and guard rail lines the top of the beautiful black cabinet with stainless steel door, helping to prevent spillage and knocked over glasses. A dishwasher safe drip tray sits under the faucet to help catch drips and spills, and is dishwasher safe to make cleaning easy. Standing on four locking casters,....
Check Stock

Kegco Tap Conversion Kit, Chrome

  • turn your single tap kegerator into a multli-tap kegerator with kegco's easy-to-install add-a-tap kit.
  • comes with all of the beer parts needed to successfully add an additional tap to your draft beer dispenser.
  • includes stylish and nsf-approved kegco chrome beer faucet with brass lever.
  • includes a 4-1/8 long chrome beer shank".
  • includes a lever handle kegco kt85d-l d" system beer keg coupler".
  • Included components: faucet, beer line, air line, clamps, shank, keg probe.
Check Stock

Tiny Home for Military Couple

  • [Solid Construction Every Part - No Leak/ No Loose]: Stainless Steel Draft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M6 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. D....
Check Stock

Kegco Kegerator Full Size Keg Refrigerator - Single Faucet - D System, Stainless Steel

  • INCLUDES COMPLETE KEG TAPPING KIT: This high-quality keg beer cooler comes complete with everything you'll need to dispense fresh draft beer straight from the keg - you just add the keg! The single faucet keg beer dispense system includes a brand new 5 lb. aluminum CO2 tank, a single gauge CO2 regulator, a D system lever handle keg coupler that can tap all domestic kegs, and a 3" diameter chrome plated metal draft tower. The CO2 tank ships empty and will need to be filled locally..
  • LARGE INTERIOR: This keg cooler has a large enough interior to fit one full size, pony, or quarter slim keg, two 5 gallon commercial kegs along with one 5 gallon home brew keg, or up to three 5 gallon home brew kegs. When you aren't using it to dispense tasty glasses of cold draft beer, the keg refrigerator can be easily converted into a regulator refrigerator using the two included adjustable storage shelves, providing additional refrigerated storage for food and beverages..
  • SLEEK AND STYLISH DESIGN: This kegerator's sleek black cabinet features a reversible stainless steel door for a modern look that will complement any decor. Easy roll casters make it easy to move your beer dispenser from your bar to your patio, and they lock to prevent it from moving once it's in positio....
Check Stock

Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard

  • ...r use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use.
  • simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
  • INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a gl....
Check Stock