ReviewsDrill Bit For Drywall

JIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood

  • High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
  • Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
  • Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
  • Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
  • Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
  • This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
  • The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check Stock

JIECHENG HSS Bi-Metal Hole Saw with Arbor Mandrel 4-inch 102 mm for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood

  • 4-inch Hole Saw with Mandrel and High Grade HSS Drill Bit. mainly for all kinds of woods,cornhole boards,plastic,rubber,drywall,fiberboard,PVC pipe,Plywood,also for thin soft steels,aluminium,brass.it can make the holes in 4-inch diameter..
  • Cutting depth is about 38mm (1.5 inch),and total height about 44mm,the pilot drill bit is diameter of 6.3mm (1/4")..
  • Notice:please take care when working, it is better with safety glasses,firstly drill in low speep,later in higher speed.the diameter in teeth is 4 inch..
  • The shank of arbor is hex with 3/8"(9.5mm ) ,this is the distance between two edges. it is for 10mm (3/8'') drill chuck and bigger..
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

QWORK Twin Blade Adjustable Hole Saw - Cutter with ABS Dust Shield for Recessed Lights Speakers Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8\ to 8\ ( 40-200mm )

  • Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic.
  • Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application..
  • Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up..
  • Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32.
Check Stock

Hi-Spec 99 Piece SAE Multi Drill Bit Set. 14 Sizes from 1/16in to 3/8in. Metal, Wood, Drywall & Plastics Drilling with HSS Titanium Steel Bits. Complete in a Tray Case

  • DRILLING AIN’T EASY: Drilling quickly and accurately into different materials requires choosing the appropriate drill bit type. Get it done right with the Hi-Spec 99 Piece Multi Drill Bit Set. The perfect complement for those everyday drilling jobs in metal, wood, drywall and plastics.
  • 99 PIECE SAE SIZES: The most-used compatible round-shank sizes of HSS metal twist drill bits needed for a range of DIY tasks – 99pc x 14 Sizes of HSS Bits: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 7/32, 15/64, 1/4, 5/16, 3/8”.
  • HSS BIT DRILLING: High-Speed tool steel (HSS4241) cuts faster, withstands higher temperatures and retains hardness for longer than ordinary high-carbon steel. Fit to electric power drill drivers and start repairs, installation, and renovation in metal, wood, and plastics.
  • TITANIUM-COATED FOR LIFE: The gold-coloured vapour-deposited Titanium Nitride (TiN) coating improves bit longevity and sharpness. Get increased surface hardness and lubrication properties to improve wear resistance, reduce friction and sticking.
  • KEEP IT TOGETHER: A slim storage tray case keeps bits in separate compartments with a foam insert for further protection. Sizes are printed on the case lid underside and its steel catch snaps shut to makes sure it doesn’....
Check Stock

TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size Holds 80 pounds Each in 1/2-in Drywall by TOGGLER 12 Pack

  • HOLDS 2X MORE THAN WING TOGGLES - SNAPTOGGLES Holds up to 1,080 lbs in concrete block and up to 265 lbs in 1/2-in drywall (Industry standards recommend 1/4 of this ultimate load per anchor).
  • REUSABLE - Metal channel will not fall behind wall - anchor is reusable and works in walls or ceilings 3/8-in to 3-5/8-in thick.
  • Great for hanging flat screen TV's, grab bars, handrails, cabinets and much more. Can be used with Drywall, Tile, Concrete Blocks, Plaster, and More..
  • SMALLEST DRILL HOLE - Requires a 1/2-in drill bit. (not included).
  • Package contains 12 anchors and 12 bolts (Bolts are 2.5 inches) - Packaging may Vary.
Check Stock

5 Pcs Magnetic Positioning Bits Anti Slip Screwdriver Bit Set PH2 Drywall Hex Shank Screwdriver Bits Screw Setter Dimpler Screw Positioning Bit Batch Head (50 mm)

  • 【Premium Quality】: Our drywall dimpler bits are made of quality alloy, high hardness and impact resistance, wear resistance and anti-rust, can serve you for a long time.
  • 【Practical Tools】: Our magnetic bit holders provide convenient pick-up and retention of screws. No more trouble of dropping screws, make your work easier and improve work efficiency.
  • 【Accurate Positioning】: Our screwdriver bit set can help you fix the screw exactly in place without worrying about wobbling or misdirection. Speed up the process of twisting screws.
  • 【Multi Use】: Our magnetic drill bit set is suitable for maintenance and installation of car, interior decoration, general household appliances, consumer electronics and more.
  • 【Wide Application】: Our drywall screw bits are compatible with impact drills, electric and manual screwdrivers, conventional cordless drills, easy to install and remove.
Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size Holds up to 265 pounds Each in 1/2-in Drywall by TOGGLER 20 Pack

  • HOLDS 2X MORE THAN WING TOGGLES - SNAPTOGGLES Holds up to 1,080 lbs in concrete block and up to 265 lbs in 1/2-in drywall (Industry standards recommend 1/4 of this ultimate load per anchor).
  • REUSABLE - Metal channel will not fall behind wall - anchor is reusable and works in walls or ceilings 3/8-in to 3-5/8-in thick.
  • Great for hanging flat screen TV's, grab bars, handrails, cabinets and much more. Can be used with Drywall, Tile, Concrete Blocks, Plaster, and More..
  • SMALLEST DRILL HOLE - Requires a 1/2-in drill bit. (not included).
  • Package contains 20 anchors and 20 bolts (Bolts are 2.5 inches) - Packaging may Vary.
Check Stock

amoolo 106pcs Concrete Anchors and Screws Assortment Kit for Drywall Concrete Wall Tile Ceramic Brick Cinder Block Etc with a Magnetic Screwdriver Bit and Masking Tape.

  • -【Widely Applications】 The assortment kit includes most widely used sizes drill bits, concrete anchors and screws in home improvement. Satisfy all your demands on hanging pictures, paintings, mirrors, clock, photo frames, shelves, other small decorations on concrete walls, ceramic tiles, drywall, wooden wall, etc..
  • -【Warranty Policy】 If you are not fully satisfied for any reason, please contact us via amazon for 100% refund or replacement in 90 days..
Check Stock

VIKITON 1 inch Hole Saw with Arbor for Cutting Metal Wood and Plastic, 25mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • Longer Service Life: Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance.
  • Superior Versatile Performance: High speed steel sharp cutting tooth can effectively drills through metal , wood , PVC board , plastic and drywall , flat and smooth , high precision.
  • Easy to Use: Pass the pilot drill bit on the connecting arbor through the center circular hole on the back of the hole saw, and rotate the connecting arbor until it is tightened..
  • High Work Efficiency : The deep gullets on the sides of hole saw provides fast chip removal.
  • Tool Kit Includes: 1" hole saw, 1 pilot drill bit for replacement, 1 arbor(contain 1 drill bit), 1 hex key.
Check Stock