ReviewsDrill Bits For Hard Steel

COMOWARE Impact Screwdriver Bit Set with Titanium Drill Bits - Quick Release Twist Drill Bit Set with Tough Case, Impact Driver Bit Set Total 35Pcs

  • 【Industrial Grade S2 Alloy Steel】 - Our drill bits are made of high quality S2 Alloy Steel in sand blasted finish, with high hardness, high hardness, good wear resistance, which is also resistant to rust. Drill Bits are classic HSS construction with titanium coating for capability and durability. .
  • 【Hex Shank & Quick Change】: Hex shank fit quick-change and lock firmly in standard chucks, suitable for any drill, driver, screw-gun, etc. Great for the DIY, household maintenance, and most general repairs..
  • 【Complete Specifications】A complete set of screwdriver bits and titanium drill bits which is most commonly used. Anytime ready to satisfy your different needs..
  • 【Wide Applications】Our drill bits set can be widely used on electric screwdrivers, hand screwdrivers, cordless drills, electric drills, air drills and so on. The bits are also impact-rated and for use in ¼” hex impact drivers (sold separately)..
  • 【HSS-Ground Titanium Coating】Classic HSS construction with titanium coating to sustain long life. The cutting edge is hardened and honed for drilling accurate and clean holes in metal, wood and plastic, Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer m....
Check Stock

Gunpla 10Pcs Multi-Material Drill Bits Set, Cemented Carbide Masonry Drill Bits for Glass, Plastic, Tile, Concrete, Brick, Wall, Wood and Brick Wall 6mm

  • 【ALLOY STEEL MATERIAL】: Gunpla drill bits set forged from premium ALLOY STEEL quality, glass drill bits provide smooth, accurate drilling in ceramic tile, marble, mirrors, glass, aluminum, concrete and wood. The durable drill bit must be kept well lubricated for the best possible results. This is most commonly done by running water over the drilling surface.
  • 【DIMENSION】: Designed with a 6mm Spear-pointed Tip, the multi material drill bits have a 1/4 inches design that reduces breakout. Length: 70mm, Shank: approx. 3/16 inches. Our spear head drill bits are heavy duty, meant to serve for a very long time..
  • 【APPLICATION】: Ideal for drilling ceramic tiles, glass, marble, and mirrors. When drilling hard materials, please use water for lubrication, good cooling can extend the service life of the drill bit. The glass drill bits are typically used with electric drills to create holes in all these cited material.
  • 【TUNGSTEN CARBIDE TIP】: The ceramic drill bit feature a Tungsten carbide tip for extended bit efficiency and life. During the process of drilling, the coating rubs away the glass, creating a perfect hole in the material being drilled.
  • 【WHAT YOU GET】: The package includes 10pcs 6mm glass and tile drill bits and a plastic storage box, ....
Check Stock

MelodySusie Long Flame Nail Drill Bits, 3/32'' Carbide Tungsten Bits, Suitable for Manicure Pedicure Cuticle Gel Polishing, Beginners Bits, Rose Gold, Series Bit-X, Triple Coarse

  • Long Flame Cross Cut Nail Drill Bits | Color: Rose Gold | Grit: Triple Coarse | Shank Size: 3/32'' | Two-Way Rotation..
  • Unique Long Flame Nail Drill Bit: The bits are designed with a longer head, and a large contact area which is faster and more convenient for removing & polishing acrylic nails than other bits. Extreme sharp teeth design allows you to fast remove acrylic nails, hard nails, gel extensions, thick nails, and dip powder with little pressure, making your nails remove like a breeze..
  • Two Rotate Direction: Designed to cut smoothly in clockwise and counter-clockwise directions for both two hands. Works for both left and right hand, you can choose the direction in a different situation. It needs that a nail drill that has a forward and reverses function..
  • Professional Nail Drill Bits: Made of the hardest YG6X carbide tungsten material, this high-precision machining nail bit comes with excellent heat dissipation, low vibration, low noise, and hard-wearing features. Fast to remove acrylic nails, dip powder, polygel, and hard gel nails..
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.
Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.
Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.
Check Stock

5/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 6

  • JOBBER LENGTH: 5/16-inch cutting diameter, 3-3/16-inch flute length, 4-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 6 pieces of 5/16-inch cobalt drill bits with case.
Check Stock

Pin Vise for Resin Casting Molds, LEOBRO Steel Hand Drill, Resin Drill with 10 PCS Drill Bit, Precision Hand Drill Tools for Epoxy Resin Arts Crafts, Wood, Clay, DIY Resin Keychain Jewelry Making

  • Handy Hand Drill for Crafts: Help drill small holes in resin, wood, plastic, polymer clay, bead, pearl or other not too hard surface, assist to make resin jewelry, resin keychain, necklace, erring, bracelet, pendant, model, sculpture, doll etc., make small precision job much easier. Note: Not fit for hard materials, like iron, steel, stone..
  • Sturdy & Exquisite Pin Vise: The precision resin drill is made of premium stainless steel, rust proof, sturdy and durable. Silver surface, polished handle, has even rough texture in 3 turning parts, looks pretty exquisite and can be rotated easily, fit for various DIY craft projects..
  • Precision Drill Bits Set: 10 sizes of steel drill bits, 0.8/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0 mm, satisfy your different demands. Pointed end, good for drilling, and the holes drilled will be nice and clean. All 10pcs are packed in a plastic box which has 10 compartments and according marks, prevent loss, and easy to distinguish..
  • Tight 3 Jaw Chuck: The hand pin vise features 3 jaw chuck, clamp the drills bits in 0.8-3 mm, keep them upright and clip them tightly, great for smooth drilling work, and it’s easy to install and replace drill bits by rotating the vise head..
  • Use-friendly Drill Tool: Swivel hand drill for manual drilling, ....
Check Stock

26Pcs Flexible Drill Bit Extension Set,Drill Bit Holder Extension,105° Right Angle Drill Attachmentt,1/4 3/8 1/2"Impact Driver Rotatable Socket Adapter,Bits Holder,Bendable Drill Bit Extension

  • [Great Drill Bit Set] ---- The drill extension kit is made of high-quality industrial-grade heavy-duty chrome vanadium steel. Set of drill including 1 x Screwdriver Bits Holder Set(6pcs 1/4 hex shank handle keychain extension rod with a black metal hanging buckle)2 x flexible drill extension, 1 x 105° right-angle drill bit extension, 3 pieces of (1/2, 3/8,1/4) universal socket adapter kit, 3 x quick release magnetic drill extension Pieces, 10 in 1 set combination screwdriver bit set, durable, and can be used for a long time..
  • [1/4inch Hex Shank Screwdriver Bits Holder Set] ---- Bits hold/quick change, Can avoid accidental dropping of tools and facilitate high-altitude operations.Application--Universal 1/4" quick hex shank and 1/4" hex socket keep different commonly used 1/4 bits handy. Fit most electric drivers, hand-held drivers and bits, like t25 and t20 bits etc.Large Load-- cancarry bits tools up to 500g in weight. To keep the drill bits not easy to fall.It is made of aluminum alloy, nice durability, lightweight, sturdy, which ensure their longevity..
  • [105° Right Angle Drill Attachment] ---- 105° Bend Narrow Space Available--Use in which you us....
Check Stock

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

  • JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.
Check Stock