ReviewsDrill Bits For Reinforced Concrete

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
Sintered diamond 4 in concrete core saw bits for concrete..
Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..

Check Stock

2 inch Diamond Hole Saw for Concrete Masonry Cinder Blocks Stucco Granite Quartz Marble Core Drill Bit Heavy Duty Dry or Wet Drilling Standard Shank Extra Deep Depth of Cut

Commercial quality, durable 2 inch core drill bits for concrete, exactly 2 inches diameter.
2 inch Diamond hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
2 in concrete hole saw dry or wet use drilling holes in stucco, concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
2 inch concrete core saw diamond drill bits for concrete.
Concrete core bit fits your standard drill with no adapter needed.

Check Stock

10-Piece Masonry Drill Bits Kit for Concrete, Stone, Carbide Drill Bit Set for Glass, Brick, Tile, Plastic, Ceramic and Wood Size 5/32 to 1/2 inch

Add Tool Versatility - Our Concrete Drill Bits Kit includes on 5/32 in. on 3/16 in, four 1/4 in. two 5/16 in. one 3/8 in. one 1/2 in bits.
1/4 in. Hex Shank - All 10 drill bits are equipped with the most common 1/4 in. hex shank providing ideal solution for drilling with both impacts and hammer drills/drivers.
Fast & Durable - 10-Piece Large Carbide Hammer Drill Bit Kit uses sharpened ground carbide tip to deliver faster drilling into masonry materials and longer life in concrete.
Wide Capacity - ideal for drilling concrete, walls, bricks, ceramic, wood, glass, tiles, stainless steel and more.
while drilling harder materials, Water or coolant is highly recommended..
Efficient- These bits deliver faster starts and less walking in concrete, brick and block.
Wide Flute Design providing fast dust remove ability and reducing heat.

Check Stock

12-PCS Masonry Drill Bit Set & Concrete Drill Bit Set, 1/8 to 1/2 inch Professional Carbide Drill Bits Tip for Glass, Tile, Brick, Cement Concrete Plastic Wood etc. Masonry Drill Bits Set by DYRECELVE

【PROFESSIONAL CARBIDE DRILL BIT SET】This set includes 12PCS carbide drill bit, suitable for cement, brick, ceramic, tile, wood, plastic, marble, etc..
【7SIZES MASONRY DRILL BIT SET】With 1/8", 5/32", 3/16"(*2), 1/4"(*4), 5/16"(*2), 3/8" and 1/2'' 7sizes, this set of drill bits is suitable for various drilling tasks, from small to large..
【INDUSTRIAL STRENGTH DRILL BITS TIP】 Thesee drill bits are made of industrial grade, corrosion-resistant materials that are designed for longevity and superior performance..
【NON-SLIP TRIANGLE HANDLE】 Ensures a tight fit and is suitable for electric drill, hand drill and bench drill. U-Type Slot Design, allows for quick evacuation of debris as you work..
【CONCRETE DRILL BIT SET】 This set is perfect for concrete drilling, with the drill bits being made of high-strength steel for durability..

Check Stock

amoolo 106pcs Concrete Anchors and Screws Assortment Kit for Drywall Concrete Wall Tile Ceramic Brick Cinder Block Etc with a Magnetic Screwdriver Bit and Masking Tape.

...ng “cross” on smooth surface to keep drill bit from slipping if necessary..
-【Excellent Load Capacity】 Tungsten carbide drill bits with revolutionary pyramid design ensure hardness, resistance and drilling power. Industrial HCS screws are highly resistant to rust and corrosion. Nylon&PE compound material concrete anchors for higher strength and better resistance to aging..
-【Widely Applications】 The assortment kit includes most widely used sizes drill bits, concrete anchors and screws in home improvement. Satisfy all your demands on hanging pictures, paintings, mirrors, clock, photo frames, shelves, other small decorations on concrete walls, ceramic tiles, drywall, wooden wall, etc..
-【Warranty Policy】 If you are not fully satisfied for any reason, please contact us via amazon for 100% refund or replacement in 90 days..

Check Stock

COMOWARE Masonry Drill Bit Set 10 pcs, Concrete Drill Bit for Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Cr45 Material

What you receive: you will get 12 pieces glass concrete drill bit set, with the size of approx. 6 mm, fitting your daily needs.
It can be installed in the general electric hand drill, bench drill.
The machine drill clamp range is 10 mm and above.
Reliable to use: the masonry drill bits are made of quality alloy, sturdy and reliable, anti-rust and wear-resistance.
With a reinforced head and nice hardness prevent bit cracking, it can provide a longer life.
Easy to use: designed with 1/4 inches hex shank, the carbide tip drill bit can be applied to all power tools more easily and securely, which will drill faster and smoother, saving your time and efforts.
Wide applications: the drill bit set can be applied to drilling glass, tile, ceramics, wood, marble, concrete, etc..
You should note that you have to remember to add water or coolant when drilling continuously.
Fine function: this glass and tile drill bit has a small incision and fine drill edge, the hole is smooth and complete, without leaving burrs, which will give you wonderful experience.

Check Stock

NewShark Concrete Drill Bit Set 10PCS, Masonry Drill Bits for Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Work with Ceramic Tile, Wall Mirror, Paver on Concrete or Brick Wall（3/16”-1/2” ）

【SIZES OF MASONRY DRILL BITS】Includes these 3.8”~4.8” in length: 2× 3/16” (5mm), 4× 1/4” (6mm), 2× 5/16” (8mm).
1×3/8” (10mm) and 1× 1/2”(12mm). Easily meet your drill needs..
【HIGH-QUALITY MATERIALS】Made of high-quality carbide YG6X alloy, the rust-resistant treatment and reinforced head prevent the drill from cracking and provide longer service life..
【SILKY DRILLING】Carbide YG6X concrete drill bit set is sharper, double design of cross arrow and spiral groove, accurate positioning, easy chip removal, and easy penetration of various materials..
【EASY TO INSTALL AND USE】1/4 Inch Hex Shank Masonry Drill Bit Set with Locking Quick Change Collet for most common drills, power drills, hand drills and bench drills, easy to install and remove, more secure..
【WIDE APPLICATION】 Concrete drill bit set, ideal for drilling holes in bathroom tiles or walls, bricks, wood, glass, stainless steel, concrete, etc. （Remember to add water or coolant when drilling）.

Check Stock

Ankey 14 Pcs Masonry Drill Bits, 1/4\ Hex Shank Concrete Drill Bits Set for Ceramic Tile, Brick, Glass, Plastic and Wood, Hard Alloy Tip Works with Ceramics, Marble, Granite

[Special Cross Shaped Tip Design]--Benefits from the unique cross tip design, these masonry drill bits can work with less skating and shaking, which can help you to finish your job accurately..
[Premium Material]--Our concrete drill bit set is made of premium industrial YG8 carbide alloy with heat treatment for maximum durability, with the YG6X carbide cross head, it provides fast drilling in materials like concrete, brick, ceremaic, tile, marble, mirror, thin iron plate, plastic, glass and wood..
[Wide Compatibility]--These ceramic drill bits comes with universal 1/4" hex shank, it can be changed quickly and reduce slipping in chuck efficiently. In addition, these tile drill bits can work with hand drill, rechargeable electric drill (24V at least) and bench drill with locking into quick change chuck..
[What’s In The Box]--14 pieces premium durable drill bits, includes 4 X 3/16"(5mm), 4 X 1/4"(6mm), 2 X 5/16"(8mm), 2 X 3/8"(10mm), 2 X 1/2"(12mm) to meet variety of needs..
[Warm Reminder]--Please try to keep the drill vertical on the surface and keep bits cool with flowing cooling water. Do Not use on hard tile..

Check Stock

ENGiNDOT Hammer Drill, 1/2-Inch 6-AMP Corded Electric Hammer Drill with 2800RPM, Variable Speed, Drill Chuck, 10 Drill Bits for Home Improvement, Concrete, Steel, Wood (NOT for Reinforced Concrete)

...e button on the top to select hammer or drilling function by your tasks. Drilling function for drilling holes on steel plates, plastic and wood, hammer function provides greater impact to make the drilling task more efficient and simple on concrete wall and masonry. Please note that this drill can't be used in reinforced concrete walls..
Powerful Motor & Variable Speed: The ENGiNDOT PID01A Corded hammer drill equipped with high efficiency industrial copper core motor, gives more power and durability, designed with variable speed, you’re able to set a suitable speed for different applications from 0-2800rpm..
Lightweight & Ergonomic Design: This hammer drill for concrete has been designed with light weight of 4.5 lbs to ensure an easy operation and less fatigue for long drilling tasks. The compact design of this hammer drill enables comfortable use and allows access to tight spaces. The rotating auxiliary handle, which adds flexibility and offers the best grip, easily controlled, accurate drilling..
What You Get: 1* ENGiNDOT corded hammer drill, 1* chuck key, 1* metal depth ruler, 5* construction drill, 5* spi....

Check Stock

Impact Rotary hammer Drill and Demolition Hammer 1INCH SDS Construction Power Tools - Electric Jack Hammer and Corded SDS Power Drill Function for Chipping Concrete and Tile Removal - Chisel

Better still, the advanced rubber grip on this SDS hammer drill gives you greater control and precision.
This combination electric chisel and impact drill comes with all the attachments needed to master your project.
We’ve included three reinforced ceramic drill bits to break through walls and brick as well as one sharp chisel and one flat chisel head for tougher surfaces like concrete and stone.

Check Stock

Sabre Tools 10-Pack 1/4 Inch x 6 Inch SDS Plus Rotary Hammer Drill Bits, Carbide Tipped for Brick, Stone and Concrete (1/4” x 4\ x 6\)

1/4” x 4” x 6" SDS plus drill bit 10 pack set – Ideal for use with Tapcon concrete screws.
High quality SDS masonry hammer drill bits designed to work in masonry applications.
Compatible with all SDS Plus sized rotary hammer drills.
Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.

Check Stock