ReviewsDrill Bits For Stainless Steel

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.

Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.

Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.

Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.

Check Stock

5/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 6

JOBBER LENGTH: 5/16-inch cutting diameter, 3-3/16-inch flute length, 4-1/2-inch overall length, 135 degree split point, 3-flat shank.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 6 pieces of 5/16-inch cobalt drill bits with case.

Check Stock

Fiezkaa Nail Drill Bits Set 10Pcs- 3/32 Ceramic Nail Drill Bits for Acrylic Gel Nails Professional Efile Nail Drill Bits Cuticle Remover Diamond Bits for Nails Manicure Pedicure

.... Convenient to use, skin-protective, great for nail filing enhancements and clean the cuticle area, sidewalls. Diamond carbide material is not only rustproof but also could protect from overheating damage with heat resistance..
【Scope of Application】10PCS different nail drill bits, universal 3/32" (2.35mm) size stainless steel shank, which fits most electric nail drill machines that use 3/32" bits. Durable for long time use, suitable for nail salon, beauty parlor, spa or personal manicure pedicure, DIY nail art at home..
【Easy to Clean】The nail drill bits are corrosion resistant, as well as no clogging for nails. Nail brush bit can easily clean the dust on the bits or nails, protect the bits after each use, keep you and your nails healthy..

Check Stock

AMOOLO 3/16' Cobalt Drill Bits(10Pcs), M35 High Speed Steel Jobber Length Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

【10Pcs 3/16" Cobalt Drill Bits】10Pcs - 3/16”(Dia 4.76mm) x2-5/16”(Flute Length 58.74mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

AMOOLO 1/8' Cobalt Drill Bits(10Pcs), M35 High Speed Steel Jobber Length Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

【10Pcs 1/8" Cobalt Drill Bits】10Pcs - 1/8”(Dia 3.18mm) x1-5/8”(Flute Length 41.28mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.

Check Stock

VALYRIANTOOL 1/8″ Cobalt Drill Bits(20PCS), M35 HSSCO High Speed Steel Double Ends Stubby Body Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

【20PCS 1/8″ Cobalt Drill Bits】20PCS – 1/8″(Drilling Diameter) x5/8″(Flute Length)x2″(Overall Length) Metal Drill Bits. This drill bit fits the majority of power drill currently on the market..
【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

STROTON Cobalt Drill Bit Set (1/16-1/2 Inch, 17PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood

SET OF 13 COBALT DRILL BITS - In the following imperial sizes 1/4", 15/64", 7/32", 13/64", 3/16", 11/64", 5/32", 9/64", 1/8", 7/64", 3/32", 5/64", 1/16".
M35, Fully Ground, 135° Split Point - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded for a Precision Drilling Diameter. 135° Split Point Design Makes it Easier to Drill Repeated Holes in Harder Materials..
PLASTIC STORAGE CASE INCLUDED - Incredibly Tough and Durable Plastic Case. Perfect for Keeping Your Cobalt Drill Bits Neatly Organized and Safe..
COBALT DRILL BITS ARE THE PERFECT DRILL BITS FOR METAL - As well as other hard materials such as Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, and More!.
LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement..

Check Stock