ReviewsDrill Guide For Angles

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • ...cast steel for long-term durability and tightness..
  • 【Dimensions】The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door frames of the cabinet. With movable drill guide holes, it is easy to drill holes and screw screws at specific positions. Even if you are not a professional installer, y....
Check Stock

Aospun 3 in 1 Dowel Jig Drill Kit, Adjustable Woodworking Drill Locator Hole Punch Tool, Pocket Hole Jig Kit with Locator Clip 8/10/15mm Bits

  • PACKAGE: The Pocket Hole Jig Kit comes with 1×3 in 1 Doweling Jig Drill, 2 x drill bits (8/10mm), 1×15mm hole opener, 1× round dowel positioner( 8mm, 10mm),3x wood dowel pins, 1 x wrench, 1 x allen wrench. 3 in 1 multi-function drill guide , for drilling dowel holes and vertical holes..
  • EXQUISITE CRAFT: The pocket hole jig is precision machined from 6061 high-quality aluminum alloy, and the surface of the drilling guide locator is anodized, which is strong and durable, anti-corrosion and rust-proof, and the product has high hardness and can be used for many years..
  • EASY TO USE: 3 in 1 dowel jig with 8/10/15mm drill bit woodworking pocket drilling jig, easy to adjust drill height and hole depth, easy for anyone to use. Pocket hole connectors are ideal for leg and rail connections, as well as cabinet construction. Insert screws into narrow pinch points..
  • IDEAL ACCESSORIES:Accurately locating and drilling locating holes has never been easier with our innovative Woodworking Drill Guide Locator Fixtures. The exquisitely processed drilling guide kit is designed with a precise scale on its main body, and the scale can be adju....
Check Stock

CertBuy Portable Drill Press for Hand Drill, Multi-Angle Drill Guide Attachment For 1/4 Inch and 3/8 Inch Adjustable Angle Drill Holder Guide, Portable Drill Guide with Chuck

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

CS Unitec | MABasic 850 Portable Magnetic Drill Press | 1800W 4-speed Benchtop Power Drill Machine w/up to 3-1/16" Diameter & 10" Depth of Cut | Oil Bottle Included

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

Multi-Angle Drill Guide Attachment Mobile Drill Stand Portable 45 Degree Adjustable Angle Drill Press Machine Stand Guide Rail Base

  • Adjustable angle drill machine stand is composed of rotatable double guide rods, which can be adjusted to accurately drill holes at an angle of up to....
  • Multi-angle drill guide rod itself has a spring, which can be quickly reset when repeated drilling.
  • A drill guide that can be used in horizontal, vertical or angular position, perfect for straight or angled drilling, drilling on the edge of a board....
  • With 4 screw holes, it is convenient to use as a fixed drill floor with depth limiter, easy to use.
  • Mobile Drill Stand is made of high quality steel and aluminum, strong and durable, high strength, long service life.
Check Stock

Acrux7 Multi-Angle Drill Guide with Chuck, Drill Press Stand, Adjustable Angle Drill Holder Guide, Stand Drill Guide Attachment for 1/4 In and 3/8 In Drills

  • 【Use For】This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
  • 【High-Quality and Durable】Our drill press stand made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • 【Adjustable at 45 Degrees】Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • 【Suitable For】This drill guide fits all 1/4-inch or 3/8-inch drills..
  • 【Drill Guide Sizes】Drill diameter: 42.5mm / 1.6in.
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

35mm Concealed Hinge Jig Kit,Suitable for Face Frame Cabinet Cupboard Door Hinges,DIY Tools for Cabinet Door Installation,Woodworking Boring Position Locator Tool Kit

  • 【Multi purpose】:NEW 35MM Concealed Hinge Drilling Jig Hole Guide Set DIY Tools. This tool makes the door easy to install, simple to use with any....
  • 【High Precision Drillin】:Suitable for 35mm hinges and also available with 26mm hinges. It comes with a 35mm bit and depth stop. It has function....
  • 【Easy to install and use】:Make cabinet door installation easy! Get drill press accuracy with any hand drill.suitable for your own home....
  • 【High Quality Material】Made of high quality environmental protection metal and engineering plastic, this hinge hole drill guide are durable, which....
  • 【High Accuracy】Reliable drilling with bit guide and stop collar. Make cabinet door installation easy! Get drill press accuracy with hand drill.
Check Stock

Self Centering Dowel Jig Kit Drilling Guide Bushings Set,Woodworking Doweling Jig Puncher Locator Joints Tool for Straight Holes.

  • ... PRECISE POSITIONING: 4 extremely precise guide holes to ensure accurate drilling every time. The jig does not have to be moved and is therefore more accurate. Only need to clamp the Doweling Jig Kit with Doweling Jig Bushings on a workpiece, you can effortlessly drill dowel pins that require precise right-angles and exact alignment..
  • EASY TO USE: Fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling, no offset or gaps are left and not easy to fall. Through this self-center dowel jig kit, you just clamp to your board and allows you to drill accurately in a matter of seconds..
  • WIDE APPLICATIONS: Self Centering woodworking dowel jig is a must-have tool in every carpenter's toolbox. You can use it to make shelves, cabinets, desks, chairs and install railings. Can also be used to repair broken doors. Very suitable for some small home construction projects, a great gift for DIY lovers..
Check Stock

General Tools - FBA_840 840 Pro Doweling Kit

  • Revolving turret accommodates six drill bit sizes.
  • Just lift and turn turret to lock in guide hole.
  • Black oxide guide bars are graduated for fast positioning of hole center points.
Check Stock