ReviewsDrill Mills

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstne....
Check Stock

Northern Brewer - Hullwrecker 2-Roller Grain Mill with Metal Base and Handle

  • Perfectly milled grains, ease of use and superior dependability. Look no further than the Hullwrecker grain mill..
  • Fully adjustable roller gap from 0.025” all the way to 0.1”, allowing you to finely tune the crush to your extract preference..
  • INCLUDES a custom-designed all metal base that fits perfectly on any standard 5 or 6.5 gallon bucket. Other grain mills expect you to provide your own base..
  • Other features include a 7lb capacity grain hopper, sealed roller bearings (not bushings), and an ergonomic comfort-grip crank handle..
  • Hullwrecker can also be driven by an electric drill..
Check Stock

Jancy Slugger by Fein - HSS Nova Annular Cutter Set Tool with Premium M2 High Speed Steel - 3/4\ Straight Shank, 2\ Depth, 7/16\ - 1-1/16\ Diameter, 11 pc. Set - 63134999020

  • PREMIUM MATERIAL - Made of tough high speed steel material, good toughness and high heat resistance, sharp and sturdy and longer service life..
  • APPLICATION MATERIAL - Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • ANNULAR CUTTER ADVANTAGE - The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material, has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • WIDE APPLICATION - Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • PACKING INCLUDED - Includes 11 cutters ( Cutting Diameter:7/16.
Check Stock

Annular Cutters Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth 7/16 to 1-1/16 Cutting Diameter HSS Slugger Bits for Magnetic Drill Press with 2 Pilot Pins

  • Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Made of tough high speed steel material, with longer service life and high heat resistance..
  • Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • Includes 6 Cutters ( Cutting Diameter：7/16, 9/16, 11/16, 13/16, 15/16 & 1-1/16"), 2 pilot pins & 1 plastic tool carrying case..
Check Stock

Annular Cutter Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Inches Cutting Depth 1 to 2 Cutting Diameter Two Flat HSS Slugger Bits for Drill Press with 2 Pilot Pins

  • Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Made of tough high speed steel material, with longer service life and high heat resistance..
  • Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • Includes 6 Cutters ( Cutting Diameter：1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 & 2"), 2 pilot pins & 1 plastic tool carrying case..
Check Stock

Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins

  • 1.Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • 2.Made of tough high speed steel material, with longer service life and high heat resistance..
  • 3.Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • 4.The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • 5.Includes 11 cutters ( Cutting Diameter:7/16.
Check Stock

Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 1 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins

  • 1.Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • 2.Made of tough high speed steel material, with longer service life and high heat resistance..
  • 3.Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • 4.The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • 5.Includes 11 cutters ( Cutting Diameter:7/16.
Check Stock

Annular Cutters Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 1 Cutting Depth 1/2-1-1/16 Cutting Diameter Two-Flat HSS Slugger Bits for Mag Drill Press with Pilot Pin

  • Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Made of tough high speed steel material, with longer service life and high heat resistance..
  • Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • Includes 6 cutters ( Cutting Diameter：1/2, 9/16, 11/16, 13/16, 15/16 & 1-1/16"), 1 pilot pin & 1 plastic tool carrying case..
Check Stock

POWERTEC 71389 T-Track Mini Hold-Down Clamp, 3-5/8

  • INCLUDES: (2) Mini Hold Down Clamps for T-tracks/T-slots.
  • (2) 5/16-Inch-18 thread 3-1/2-Inch long T bolts.
  • FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies.
  • FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity.
  • DESIGN: Made from premium grade anodized aluminum with a lever shaped profile ensuring optimal leverage in addition to work piece accessibility.
  • VERSATILITY: Hold Down Clamp Set is ideal for work holding, positioning, and fixturing for many woodworking or metalworking applications, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills and more.
Check Stock

110V Electric Rice Corn Grain Coffee Wheat Feed Mill Wet Dry Cereals Grinder

  • 【Premium Material】: This DIYAREA grain grinder adopt premium materials to ensure high quality and durability. The capacitor shell is made of high....
  • 【Dry and Wet Mill Machine】: It grinds wheat, rice, corn,Coffee,Spices, sorghum, soybeans into dry powder.
  • as well as grinding soaked beans, rice....
  • 【High Efficiency】: Powerful 2200W motor, high speed electric grain mill grinder has higher performance than traditional mills.
  • 【Wide Applications】: Suitable for grinding bean curd, starch, rice flour, corn and used in other food industries. At the same time, it can be used....
Check Stock

SCIEO Annular Cutter Set 13 pcs 3/4 Inch Weldon Shank 1 Cutting Depth Drill Bits 7/16 Inch-1-11/16 Inch Diameter for Magnetic Drill Press HSS Standard Industrial Tool Kit with Pilot Pin & Hex Wrench

  • Annular cutter are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Made of tough high speed steel material, with longer service life and high heat resistance..
  • Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • Includes 1 annular cutter with plastic case..
Check Stock