ReviewsDrill Press Lathe

Leather Burnisher Pointed Tip Leather Edge Slicker Polished Drill Leathercraft Carving Tool Shank for Rotary Tools L

It has several different grooves that allow you to burnish most thicknesses of leather projects.
Its design will allow you to effectively finish tight corners, small holes, slots, belt loops and edges difficult to reach.
Burnishes the edges of your leather in a shorter time than it takes to do by hand.
Suitable for a drill press, hand drill, lathe, or any other motorized tool.
This burnisher is ideal for finishing leather craft such as belt, knife sheaths, saddles, etc.

Check Stock

Center Drill Bits Kit 1.5/2/2.5/3/4mm Center Drill Bit 5pcs High Speed Steel Center Drill Bits 60 Degree Center Drill Bit for Hole Processing

[Prefabricated Precise Positioning]: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
[Light Cutting and Good Chip Removal]: It has the advantages of light cutting and good chip removal.
When machining a center hole with a diameter of 2-10mm, this center drill is usually used.
[5 Center Drill Bits]: This 60 degree center drill bit has 5 center drill bits, which can be used to drill holes of different sizes.
[Made of High-speed Steel]: This center drill bit is made of high-speed steel, with high hardness and good wear resistance.
[Widely Used]: This center countersink drill bit can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.

Check Stock

Hegebeck Combined Center Drills Bit Countersinks Plain Type 1/8 Inch Dia Shank High Speed Steel HSS 6542 Silver 5 Pcs

【MATERIAL】-This combined center drills was made by High Speed Steel 6542,which is solid and high temperature wear resistant，not easy to break.
【ADVANTAGE】-Used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
【FEATURE】-Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
【APPLICATIONS】- Work with lathe machines and most electronic drills to drill holes in steel, iron, alum, carbon steel, brass,etc.

Check Stock

Pointed Tip Leather Burnishing Tool,Leather Edge Burnisher Leather Slicker Tool Set Burnishing Wheel of Leathercraft Supplies by INNETOC

〈Product features:〉 Can polished leather skin side to side several widths for different thickness polished leather..
〈Product advantages:〉 Perfect for remel rotary tool!Will also fit a drill press, hand drill, lathe, or any other motorized tool..
〈notice：〉 Material:Ebony. Speed should not be too fast..
〈Method of use:〉 simple wet the edge of the Leather and then add either Richard soap or glycerin for a fine burnished edge..
〈after-sales service:〉 Provide you with 24 hours online consultation, 30 days return policy guarantee your happy shopping experience.

Check Stock

5pcs High Speed Steel Center Drill Set, Center Drill Bits, Combined Drill, Countersink Lathe Mill Tool Set, HSS 60 Dgree 1.5/2/2.5/3/4mm for Lathe Machines & Remove Chips

★【For Metalworking】These center drill bits are used in metalworking to provide a starting hole for a larger-sized drill bit..
★【For Conical Indentation】They can also be used to make a conical indentation in the end of a workpiece in which to mount a lathe center..
★【Material】Made from high speed steel, these center drill bits are of high hardness and good wear resistance.Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
★【5 Sizes】There are total 5 pieces center bits in this set that can be used to drill holes in different sizes..
★【Applications】Widely used on lathe machines, these center drill bits can cut easily and remove chips smoothly.Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on..

Check Stock

Honoson 2 Pieces LED Sewing Machine Light 30 Pieces LED Sewing Machine Light with Flexible Silone Coating Gooseneck and Magnetic Mount Base for Workbench Lathe Drill Press

What will you get: you will 2 pieces LED sewing machine lights that will provide a better working environment when you're sewing at night.
The power cord of the LED light is 4.4 ft/ 1.35 m in length.
Magnetic base: there is a magnetic base of the sewing light, and it is easy to be attached and removed to any metal surfaces, such as workbench, lathe, drill press and milling/sewing machine.
Bright and soft light: each sewing light features with 30 pieces LED with high-density, which can achieve a high brightness to light up the area around your working.
Besides, light is so soft and no dazzling that your eyes will not get any hurt even with a long workingtime.
Various range of usages: the magnetic mount light not only can be applied for sewing machine, drill presses, desks, music stands, craft, workbenches, lathes lamps, metal lathe, but also suits as the desk lamp at home for learning, reading magazine and doing handwork.
360 degree flexible neck: the LED sewing light is designed with a 360 degree gooseneck, which is easy to bend and allows you to place your light in any angle that you want.
The 13.8 inches/ 35 cm silicone flexible tube is on the metal gooseneck, so the sewing light is safer and more comfort and flexible to use.

Check Stock

Honbay 2PCS Sandal Wood Leather Edge Burnisher Tool Leather Slicker Tool Leather Burnishing Tool Pointed Tip Leather Slicker for Rotary Tools

Package includes: 2PCS Leather Edge Burnisher Tool.
Style: 2 different style, 1 piece for each..
DESIGN FEATURES: 1. Nice texture and smooth surface.
2. High hardness, not easy to warp and deform.
3. Several grooves with different widths, suitable for leather edges of different thicknesses..
PRACTICAL & MULTI-PURPOSE: A good helper to make your life and work easier.
Fit for Dremel rotary tool, also fit for drill press, hand drill, lathe, or any other motorized tool.
Ideal for burnishing holsters, knife sheaths, saddles, etc.
Perfect for small holes, slots, belt loops, hard to reach edges, etc..

Check Stock

uxcell M5 x 30mm Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type Round Head 8 Pcs

Safe, secure grip for the ultimate in adjusting and tightening control..
Tightly -in metal insert insures optimal durability and functionality..
Great for saw, drill press, lathe and routing jigs..

Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.

Check Stock

PROXXON MICRO Mill MF 70, 37110

Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
Drill, cut and turn metal, wood and plastic parts with precision..
Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..

Check Stock

Mini Lathe Beads Polisher Machine DIY Machining for Table Woodworking Power Wood Tool Lathe Set Grinding (Black)

【Widely Used DIY Hobbies】Great used for the both indoor and outdoor DIY enthusiasts.
【Adjustable 7 Power Levels】This mini beads lathe machine can adjust the rotating speed using the 7 power levels adapter to meet different cutting need..
【High Quality Material】Machine base: Durable aluminum alloy. Drill chuck: High-quality pure steel..
【Multi-functional Lathe Machine】The mini lathe suitable for polishing beads,turn holepearl, cutting jade, plastic,turning wood home woodworking. not suitable for mass production or commercial use..
【All Copper Motor】Strong cutting power and lower noise and Low energy consumption. Rotating speed range: 5000-10000 RPM..

Check Stock