ReviewsDrill Press Made In Usa

Lukcase Floor Drill Press Stand Table for Drill Workbench Repair Tool Clamp for Drilling Collet,drill Press Table

  • ✔This heavy duty drill stand is designed for use with power drills with collar diameter of from 38mm to 43mm（1.48” to 1.7”).With this drill stand, drilling at surfaces, round workpieces and boards can be done with absolute precision..
  • ✔Substantially cheaper than purchasing a full drill press. This drill press stand has all the necessary features expected in a full-size drill press stand..
  • ✔It includes separate adjustments for limiting press depth and drill height so you can change drill position with minimal risk of over-drilling into the stand..
  • ✔The drill collar can be adjusted to suit a variety of tools and the stand is supplied with 3 different size collar inserts to suit smaller drills..
  • ✔It has a sturdy metal column bar and base with slots for fitting a machine vice and 4 clamping points for mounting firmly with your worktable .It also features a depth adjustment scale and stop ith an adjustable scale ring for accurately setting the drilling depth, down to the last millimeter..
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

BEAMNOVA Drill Press Stand for Hand Drill Benchtop Industrial Kit Tool Holder 90 Degree Clamp Workbench Repair Tool

  • WIDELY FITS - BEAMNOVA heavy-duty drill stand is designed for power drills of collar diameter from 38mm to 43mm（1.5'' to 1.69'') with supplied reducing bush. With this drill stand, drilling at surfaces, round workpieces, and boards can be done with absolute precision. NOTE: Suitable for most corded drills that have a collar for holding. Does not fit most cordless drill, which does not have a collar for clamping..
  • MONEY-SAVING - Substantially costs less than purchasing a full drill press. This drill press stand has all the necessary features expected in a full-size drill press stand..
  • ADJUSTABLE - Includes separate adjustments for limiting press depth and drill height, so you can change drill position with minimal risk of over-drilling into the stand..
  • 3 SIZE COLLARS - The drill collar can be adjusted to suit a variety of tools, and the stand is supplied with 3 different size collar inserts to suit smaller drills..
  • USER-FRIENDLY - It has a sturdy column bar and the base has slots for fitting a machine vice and 4 clamping points for mounting firmly with your worktable. It also features a depth adjustment scale and an adjustable scale ring for accurately setting the drilling depth, down to the last millimeter..
Check Stock

Electric Resin Drill Set,Pin Vise for Resin Molds Jewelry Casting, YASPIT Anti-Skid Drill Press Vise, 210 PCS Keychain making Supplies, Precision Hand Drill Kit for DIY Resin Keychains Jewelry Making

  • [Upgraded Kit for DIY Projects] We provide 4 additional white upgraded soft rubber fixing screws to replace the old orange hard plastic fixing screws to avoid scratching your resin crafts.This set includes 1 Electric Hand Drill , 1 Non-slip mat(Prevent the vise moving on the desktop),1 USB cable,6 pcs steel drill bits(0.8-1.2mm), 1 drill press vise, 210 pcs keychain supplies..
  • [Premium Electric Mini Drill For Resin] Electric resin drill more time-saving, labor-saving, efficient, and precise that manual hand drill.Simply half unscrew the chuck, insert the drill bit you need, then screw the head tightly with vise to finish install.Great for creating epoxy resin jewelry, keychain, necklace, earrings, Christmas decors, and wood working, sculpturing, etc...
  • [Drill Press Vise for Fixing] Help hold parts in place while you drill/glue/sculpture, great for DIY precision work.Soft rubber fixing screws and hard plastic fixing screws can meet different needs. Clamping range: 0-2.1 inch, can be adjusted easily, Press the orange button to adjust quickly, then turn the shaft to fine-tune,until the resin pieces is locked..
Check Stock

Pin Vise for Resin Molds Jewelry Casting, LEOBRO Steel Hand Drill with 10 PCS Drill Bit, Drill Press Vise, 210 PCS Keychain Supplies, Precision Hand Drill Kit for DIY Resin Keychains Jewelry Making

  • Perfect Kit for DIY Projects: Includes 1 steel pin vise, 10 pcs steel drill bits(0.8-3mm), 1 drill press vise, 210 pcs keychain supplies(contain key rings with chains, screw eye pins, jump rings), great for creating epoxy resin jewelry, keychain, necklace, earrings, Christmas decors, and wood working, sculpturing, etc...
  • Well-made Steel Hand Drill: 12cm/4.7inch stainless steel hand drill, sturdy and long-lasting. Precisely designed 3-jaw chuck, clamp the drill bit uprightly and firmly. With rough texture on turning parts, prevent fingers from sliding and make rotation easier. Shiny silver look, classic and graceful..
  • 10 Drill Bits for Selection: Contains 0.8, 1, 1.2, 1.5, 1.8, 2, 2.2, 2.5, 2.8, 3 mm drill bits, meet your different needs. Made of stainless steel, hard to bend or crack, durable. All bits packed nicely in a plastic case with compartments and according marks, well prevent loss, good for finding..
  • Drill Press Vise for Fixing: Help hold parts in place while you drill/glue/sculpture, great for DIY precision work. Clamping range: 0-2 inch (0-5.3 cm), can be adjusted easily, fit for holding small art pieces. Made of quality plastic, sturdy, clamp securely, long-lasting..
  • 210 PCS Keychain Supplies: 100 pcs screw eye pins (gold&silver, 50 for each)....
Check Stock

BUCKTOOL 12-INCH 6.2-A Professional Bench Drill Press Powerful 3/4HP Benchtop Drill Press Variable Speed Drill Press with IIIA Laser and Work Light

  • POWERFUL 6.2A MOTOR: Equipped with a powerful 6.2A induction motor (most 12-IN drill press motors are only 5A), provide you constant power to drill through all kinds of material.
  • PROFESSIONAL DRILL PRESS: 1/32" - 5/8" Keyed chuck, 12" swing, 3-1/8" spindle travel, and overall height of 39" (2" high than other 12" drill press).
  • VARIABLE SPEED: You can easily adjust the speed from 580 to 3200 RPM, satisfying your drill needs from wood to all kinds of metal. Digital speed readout helps precisely control the speed.
  • FULLY ADJUSTABLE WORK TABLE: The flat work table can rotate 360° and bevel 45° left or right.
  • EXTRA SUPPORT: This drill press equips with a Class IIIA 2.5mW laser, work light, emergency stop switch, and no voltage release switch, help you work precisely and safely.
Check Stock

URETHANE BANDSAW TIRES FOR GRIZZLY MODEL G1019 HEAVY DUTY .095 THICK 2 TIRE SET

  • HIGH-GRADE ENGINEERED RUBBER : Thanks to fiber-rich compounding and outstanding consistency, each DNLK rubber bandsaw, sander, poly V, planer,....
  • LIFETIME ASSURANCE : All our bandsaw, sander, poly V, planer, sharpener, compressor, drill press accessories, including ribbed drive belts, cog drive....
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drive belts have been tested and have proven to withstand....
  • MADE IN THE USA : Every single motor drive belt is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our....
  • WIDE COMPATIBILITY : DNLK drive belts are compatible with most brands. Order our high-strength rubber belt and profit from reduced downtime and....
Check Stock

CertBuy Portable Drill Press for Hand Drill, Multi-Angle Drill Guide Attachment For 1/4 Inch and 3/8 Inch Adjustable Angle Drill Holder Guide, Portable Drill Guide with Chuck

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

CS Unitec | MABasic 850 Portable Magnetic Drill Press | 1800W 4-speed Benchtop Power Drill Machine w/up to 3-1/16" Diameter & 10" Depth of Cut | Oil Bottle Included

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

Mophorn 1550W MD50 Magnetic Drill 500 RPM Spindle Speed Electric Magnetic Drilling System with 2 Inch Boring Diameter and 2900 LBS Magnet Force

  • Superior Performance: Our portable drill press generates exceptionally strong power thanks to its 1550W copper motor. It is capable of drilling into the toughest materials at 500 RPM. Maximum Coring Diameter: 2"/50mm.
  • Maximum Travelling Distance: 8.3"/210mm. Besides, our magnetic drill can only be used with hollow boring bits, not with annular bits..
  • Useful Accessory Kit: We provide you a rust-proof stainless steel cooling pot with the capacity of 30.51Cubic Inch /500ml. The cooling system avoids the risk of damage due to dust entering the machine..
  • 13,000N Magnetic Force: The powerful two-stage magnet can generate 13,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom..
  • Thoughtful Designs & Cooling System: This ergonomic design handle provides comfortable grip in operation and transport. These 3 extended crank handles are coated with nonslip rubber for laborsaving operation. Coolant tank, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
  • Various Applications: This versatile magnetic drill press is immensely suitable for industrial and ste....
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock