ReviewsDrills Cordless Drills

PVC Pipe Reamer PVC Fitting Saver PVC Socket Saver with 0.315 Hex Shaft 1-½-Inch and 2 Inch Head Aluminum for Water Lines Drain Lines Vent Lines

  • Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC....
  • Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
  • High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
  • Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
  • Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
  • It is recommended to use a variable-speed electric drill....
Check Stock

Cordless Drill into a Wall

  • ➤ Cordless Drill with 1/2 Chuck: 1/2 in. ratcheting chuck provides superior bit gripping strength. Compared with 3/8" drills has unbeatable....
  • ➤ High Performance: 400 in-lbs torque, 2 variable speed setting(0-400rpm&0-1,600rpm), 20+1 torque settings. This drill covers most occassions, allow....
  • ➤ Ergonomic Designs: drill body little bit larger than 3/8" drills with much more solid, higher performance. The side handle increased comfort,....
  • ➤1,000+ Cycle Use Battery: PowerSmart 20V battery allows at least 1,000 cycle use. The included 1,500mAh battery was tested can driver #8x1-1/2 in.....
  • ➤ What's more: built-in LED foot light, battery indicator, rubber-covered handle, etc. Backed by a 2-year, limited warranty so you can buy with....
Check Stock

Training for the Complete Rower: A Guide to Improving Performance

  • WIDELY FITS - BEAMNOVA heavy-duty drill stand is designed for power drills of collar diameter from 38mm to 43mm（1.5'' to 1.69'') with supplied reducing bush. With this drill stand, drilling at surfaces, round workpieces, and boards can be done with absolute precision. NOTE: Suitable for most corded drills that have a collar for holding. Does not fit most cordless drill, which does not have a collar for clamping..
  • MONEY-SAVING - Substantially costs less than purchasing a full drill press. This drill press stand has all the necessary features expected in a full-size drill press stand..
  • ADJUSTABLE - Includes separate adjustments for limiting press depth and drill height, so you can change drill position with minimal risk of over-drilling into the stand..
  • 3 SIZE COLLARS - The drill collar can be adjusted to suit a variety of tools, and the stand is supplied with 3 different size collar inserts to suit smaller drills..
  • USER-FRIENDLY - It has a sturdy column bar and the base has slots for fitting a machine vice and 4 clamping points for mounting firmly with your worktable. It also features a depth adjustment scale and an adjustable scale ring for accurately setting the drilling depth, down to the last millimeter..
Check Stock

Cocowin PVC Pipe Reamer, PVC Fitting Saver, PVC Socket Saver with 1-½-Inch and 2 Inch Head Aluminum for Water Lines, Drain Lines, Vent Lines

  • Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
  • It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature..
  • Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC and ABS Ventilation Pipe, Drain Pipe, Water Pipe..
  • High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
  • Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
  • Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
Check Stock

The Gorilla Hook Cordless Drill Tool Belt Holster

  • One-handed Cordless Drill Holster for Tool Belt.
  • Keeps Cordless Drill, Scaffold Wrench Secure and Safe.
  • Heavy Duty Construction Tool Belt Holster.
  • Fits major cordless drills, impact wrenches from Makita, Dewalt, and Milwaukee.
Check Stock

Omniwall Cordless Power Tool Kit-16\ x 32\ Black Metal Pegboard Organization System Black

  • Perfect Cordless Drills Storage - Our Favorite And Best Selling Accessory, The Multidrill Cordless Drill Holder, Comes In The PowerStation. The Multidrill Shelf Holds 4 Cordless Drills In Many Different Ways. You Can Hang The Battery Powered Tools By The Battery, Or From The Base Of The Drill. The Multidrill Shelf Also Provides Top Shelf Storage For Your Battery Chargers And Spare Batterys..
  • All-Purpose Shelving Storage -The OmniWall pattern on the front lip is more than just an attractive design. Attach one or several hook attachments on the front to store duct tape, shop towels, or other tools. This practical shelf is great for storing car detailing supplies, quarts of motor oil and/or spray paint cans..
  • Power Strip For Charging- The Powerstation Also Comes With A Low Profile Powerstrip That Has Regular Outlet Ports As Well As USB Ports To Power Or Charge Anything You Need. The Power Strip Also Comes With A 10 Foot Low Profile Cord Allowing You To Reach Far Away Outlets As Well As Store Excess Cord Behind Our Panels.
  • Patented Tab Design -Our patented tab locking system along with Omniclips are used secure the accessory to your panel. The tab system locks into the vertical or horizontal slots making our accessories completely different that traditional....
Check Stock

Grinder Chuck Key 0.3-3.2 Clamping M8 for Offices Garages(Short tail M8x0.75 chuck + rod set)

  • Made of high quality brass and aluminum alloy for durability and long life.
  • Three-jaw head chuck with a wide gripping capacity of 0.3 mm to 3.4 mm.
  • The universal 1/8 inch chuck can be connected to many electric drills, cordless drills etc..
  • Comes with a practical Allen key that you can use to easily tighten or loosen.
  • This drill chuck would be a great replacement for your old or broken one.
Check Stock

PANOVOS (10pcs) 6-15mm Power Nuts Driver Drill Bits Tools Set Magnetic Extension Metric Socket Wrench Screw Drill Bit Holder 1/4\ Hex

  • Quick Change Hex Drills Bit,easy to be installed and dismantled.
  • All nuts tools setters are magnetic and are 65mm in length.
  • Fitting most power corded or cordless drills driver with 1/4" shank..
  • Package : 10 * Power Nut Sockets Wrench set.
  • Metric: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm.
Check Stock

Drilax 1 3/4 Inch Diamond Hole Saw Drill Bit Ceramic, Porcelain Tiles, Glass, Granite Counter top Shower, Faucet Size 1-3/4

  • 1-3/4 inch Diameter Diamond Hole Saw - DUSTLESS - CLEAN - FAST DRILLING for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects.
  • STANDARD 3/8 Shank for Standard Electric or Cordless Drills. Depth of Cut is 1-1/8 inch.
  • Solid Steel Body: Spins True, Cools Better, Lasts Longer.
  • Wet Use with Water for Cooling. Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass.
  • Increased Body Height for Deeper Cuts Clean, Precise, Fast, and Dustless Cuts Every Time.
Check Stock

LICHAMP Double Fluted Step Drill Bit for Cutting Metal Hole 19 Sizes from 3/16 to 1-3/8 inch, Genuine High Speed Steel

  • 1) ONE BIT FOR ALL: High-visibility silver targets for primary 19 hole sizes.
  • come with 19 sizes (3/16", 9/32", 3/8", 7/16", 17/32", 5/8", 11/16", 25/32", 7/8", 29/32". 31/32", 1", 1-1/16", 1-1/8", 1-5/32", 1-7/32", 1-9/32", 1-5/16", 1-3/8") so you can drill up holes with different diameters, saving your time and efforts to change bits..
  • 2) DURABLE & STURDY: Solid M2 high speed steel construction for extra durability, the unique thick 3/8 inch hex shank prevents slip in drill chuck and reduces shocks, for a more positive grip..
  • 3) HIGH PERFORMANCE: Double-Fluted Step Drill Bits provide faster cutting and drilling than single flute bits, it is optimized for cordless drills in high speed provides greater speed and control..
  • 4) CONVENIENT & ACCURATE: Easy-to-read step rings save time when drilling common holes, laser-engraved marks, offer superb convenience and accuracy, for fast, easy hole size identification..
  • 5) UNIVERSAL COMPATIBILITY: Compatible with 1/4, 3/8, 1/2 electric drills or bench drills, work for sheet steel, metal, aluminum or plastic, designed for drilling on steel plates up to 0.2 in. thickness..
Check Stock

BEAMNOVA Drill Press Stand for Hand Drill Benchtop Industrial Kit Tool Holder 90 Degree Clamp Workbench Repair Tool

  • WIDELY FITS - BEAMNOVA heavy-duty drill stand is designed for power drills of collar diameter from 38mm to 43mm（1.5'' to 1.69'') with supplied reducing bush. With this drill stand, drilling at surfaces, round workpieces, and boards can be done with absolute precision. NOTE: Suitable for most corded drills that have a collar for holding. Does not fit most cordless drill, which does not have a collar for clamping..
  • MONEY-SAVING - Substantially costs less than purchasing a full drill press. This drill press stand has all the necessary features expected in a full-size drill press stand..
  • ADJUSTABLE - Includes separate adjustments for limiting press depth and drill height, so you can change drill position with minimal risk of over-drilling into the stand..
  • 3 SIZE COLLARS - The drill collar can be adjusted to suit a variety of tools, and the stand is supplied with 3 different size collar inserts to suit smaller drills..
  • USER-FRIENDLY - It has a sturdy column bar and the base has slots for fitting a machine vice and 4 clamping points for mounting firmly with your worktable. It also features a depth adjustment scale and an adjustable scale ring for accurately setting the drilling depth, down to the last millimeter..
Check Stock