ReviewsDrink Dispenser Spigot Replacements

Glass Drink Dispenser for Parties - 1 Gallon Glass Jar Beverage Dispenser with Stand - Glass Water Dispenser Countertop for Weddings, Sun Tea Jar, Lemonade & Laundry Detergent Dispenser

  • Mason Jar Drink Dispenser - The Estilo single glass mason jar beverage dispenser with decorative metal stand has a wide-mouth design with a tin screw off lid that makes it easy to clean, use and fill with your favorite beverage..
  • High-Quality and Strong Glass Beverage Dispenser - Our glass dispenser is made of thick high-quality, premium-grade glass with a non-drip, easy pull spigot. The liquid dispenser’s spigot is created to provide a steady stream of your favorite drink!.
  • Great for Parties or Everyday Use - This gallon dispenser makes a great centerpiece for parties, holidays, barbecues, picnics, bachelor and bachelorette parties, weddings and more! It’s also a great liquid laundry detergent dispenser..
  • Great Size – Our liquid dispenser holds up to 1 gallon (3.78 liters), so that you can fill with your favorite beverages, iced tea, lemonade, and more. The glass beverage dispenser is not recommended for hot liquids!.
  • Dispenser Dimensions - 6" L x 6” W x 10" H inches. Hand wash only!.
Check Stock

DOZYANT Beverage Dispenser Push Style Spigot,Stainless Steel Polished Finished, Water Dispenser Replacement Faucet, fits Berkey and Gravity Filter systems

  • Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Multi-Function – The DozyAnt Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light..
  • Premium Quality –The DozyAnt Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our DozyAnt Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willingness..
Check Stock

[Updated] More Durable Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished, Water Dispenser Replacement Faucet, fits Berkey and other Gravity Filter systems as well

  • Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Multi-Function – The DozyAnt Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light..
  • Premium Quality –The DozyAnt Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our DozyAnt Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willin....
Check Stock

2 Pack 1 Gallon Drink Dispensers for Parties, Beverage Dispenser with Stainless Steel Spigot&Lids, Glass Drink Dispenser Punch Dispenser for Sun Tea, Lemonade,Tea,Cold Water & More

  • MASON JAR DRINK DISPENSER: This glass mason jar beverage dispensers is 10.1” H, 5.9” L and 5.9” W,1 gallon of the capacity. The can opening is 4.2 inches in diameter, making it very easy to fill and clean..
  • HIGH-QUALITY: Our glass dispenser is made of thick high-quality, premium-grade glass with a non-drip, easy pull spigot. The glass dispenser’s spigot is created to provide a steady stream of your favorite drink! Crystal clear glass looks beautiful with nice and colorful beverage inside and makes it more attractive at your party..
  • STAINLESS STEEL SPIGOT:The spigot is made of 304 stainless steel. Smooth switch rotation for easy turning, drip-free, lead-free & rust resistant. Control the flow rate and easily dispense cup after cup without any messy dripping,It will surely enhance your party or home to a beautiful look..
  • MULTIPLE USES IN MANY OCCASIONS: Big capacity and convenient use of juice dispensers are not just great to hold daily simple drinks for everyday drinking, but also the best container for diverse parties like birthday party, bridal shower, gender reveal party, get-together, wedding, pink champagne party, Christmas and thanksgiving party. Also be used outdoors or carried like yard buffet, BBQ, picnic and RV-travel..
Check Stock

WodsWod Beverage Dispenser Replacement Spigot Fits 16mm(5/8 inch)Opening, Stainless Steel Polished Finished, Water Dispenser Replacement Faucet, fits Berkey and other Gravity Filter systems

  • Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Multi-Function – The WodsWod Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light..
  • Premium Quality –The WodsWod Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our WodsWod Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willin....
Check Stock

Glacial Ice Design Glass Beverage Dispenser with SS Spigot and Stand - 2.5 Gal

  • Stainless steel, leak-free spigot. Our high end spigot will last for years and is easy to clean and maintain. You’ll be confident about dispensing drinks into glasses without spillage with our high quality spigot. No mess on your favorite tablecloth!.
  • Easy set up and cleaning. Our glacial ice design iced drink dispenser is ideal for parties where you want your guests to be able to quickly serve themselves drinks. Our three piece design means that you can set up the beverage dispenser within seconds, fill it and then access the interior for thorough cleaning before your next use..
  • Our glacial ice design glass drink dispenser offers a modern, high-end design ideal for any occasion. Finished with a stylish glass cover, our lead-free, heavy-duty glass design allows for easy, leak-free beverage service for your guests. Unlike plastic dispensers, you’ll love the fresh taste of all of your drinks that glass offers for years to come..
Check Stock

DEAYOU Glass Beverage Dispenser with Spigot, Cold Drink Ice Tea Dispenser with Trigger Clamp Locking Lid, Glass Mason Jar Lemonade Liquid Pitcher with Spout for Party, Fridge, Juice, Beer, 0.8 Gallon

  • Durable Construction: DEAYOU drink beverage dispenser is made of premium food-grade thick glass, sturdy and durable. Constructed with a bail and trigger hermetic clamp locking lid. The non-drip spigot is made of high-quality resin. The leak-proof lid is also combined with a rubber. Note: Please open the lid when using the spigot, then the faucet will work.
  • Large Capacity: Our glass beverage dispenser with spigot measures approx. 10.6″ height x 7.6″ bottom diameter x 5.5″ top diameter with the maximum capacity of 0.8 gallon, large capacity to meet family uses. The crystal-clear walls grant you the great view of the good inside.
  • Versatile Uses: Our cold drink ice tea clear dispenser with trigger clamp locking lid is perfect for dispensing your favorite beverages such as iced tea, lemonade, orange, soda, water and other liquid. Airtight seal and thick glass insulation ensure drinks stay fresh for hours.
  • Vintage Style: This leak-proof glass mason jar with spout is designed to a rustic style pitcher, which makes it the attractive centerpiece or buffet decor for your home and increases the overall drinking experience. It is also an elegant gift for your families and friends.
  • Wide Applications: Our glass beverage dispenser with spigot features a unique de....
Check Stock

Mimorou Plastic Drink Fridge Dispenser with Spigot, Beverage Dispensers for Parties Stand and Daily Use, Juice Milk, Tea, Containers Lids Water (Classic Style, 3 Pcs), 11 x 6.4 x 5.1 inches

  • What You Will Get: you can receive 3 pieces of plastic drink dispensers with spigot, they are designed with a clear color, simple but stylish, which will give you a chance to spend a cool summer at home, you can use them on the parties, weddings, activities, birthdays, bouquets and so on.
  • Safe and Sturdy Material: the water container for fridge is made of PP material, lightweight and safe, reliable and portable, can withstand -4 degrees Fahrenheit to 248 degrees Fahrenheit temperature, will meet your needs.
  • Size Information: our cold drink dispenser can hold the capacity of 0.9 gallon, you can simply pour water, drink, even ice tubes and fruit into the container, and make a variety of cold drinks.
  • Easy to Clean and Assemble: there is a spigot on the refrigerator beverage dispenser, you can screw on and use it easily, designed with a small lid that can be turned over, easy access without opening the lid, then you can remove the cap and spigot, and clean it, note: If it leaks, reinstall nuts or spigots.
  • What You Can Hold: with a large capacity and handy design, you can use our juice ....
Check Stock

Plastic Drink Dispenser ,Beverage Dispenser With Spigot.1.2Gallon Iced Lemonade Juice Containers With Lids For Fridge Or Parties. Small Water Dispenser For Daily Use.Free For 3 Scouring Pad

  • STAINLESS STEEL BEVERAGE DISPENSER: The stainless-steel beverage dispenser is the perfect drink container for your next party, hosting event, catering or family picnic..
  • 5-GALLONS: The beverage dispenser is equipped with a 5-gallon durable container along with a stand and spigot. Disassembles easily allowing you to thoroughly clean after use.
  • 2 ICE CHAMBERS: Simply fill internal ice core (container) and bottom stand unit with ice to chill the drink quickly and keep cold throughout the party, event or picnic. The bottom stand is built with a double wall to prevent unwanted condensation.
  • DURABLE CONTAINER: The drink container is constructed with BPA free clear acrylic and brushed stainless steel (18/8) offering a durable yet charming appeal to the beverage holder. The spigot is crafted from a durable plastic..
  • DIMENSIONS: 12.5” Diameter x 25” Height.
Check Stock

OFNMY 2 Pack Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished, Water Dispenser Replacement Faucet for Beverage Dispenser or Glass Jar

  • ????Fits Dispenser Wall Up to 11/16 inch or 17mm Thick – This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install, total size: 97mm x 61mm or 3.81 inch x 2.39 inch..
  • ????Fits All Berkey Stainless Steel Models, NOT Berkey Light – The Beverage Dispenser Replacement Faucet is made of food-grade SUS304 stainless steel, No Lead, Acid Resistant, great for dispensing tea, beverage, vinegar or wine. and works for most self-serve, traditional beverage service and parties..
  • ????Fast & Steady Flow Rate – Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation..
  • ????Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • ????How to use? – Step1: Hold a faucet, place a stainless gasket and then a silicone gasket into it.
  • Step2: Thread faucet through your beverage dispenser, and then a silicone gasket, a washer and a nut.
Check Stock

Mind Reader GALBDISP-SIL 3 Gallon Cold Beverage Dispenser, Leak Free Spigot, Serving, Galvanized Metal, Silver

  • Large capacity Beverage dispenser – holds up to 3 gallons. Perfect for home made Iced tea, lemonade, sangria, rum punch, water and much more..
  • Durable – galvanized metal container holds drinks safely. High quality metal construction will last for years of usage.
  • Spill proof – metal top lid top prevents anything from outside getting into the drink.
  • Mess free – non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages.
  • Leak Proof Spigot – The spigot was designed with great attention to detail as it will not leak even when it is at full capacity and you have been pouring drinks all day..
  • Mess Free – The non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages. Most importantly you and your guest can pour drinks without having to worry about the spigot leaking juice or water on your shoes or clothing..
  • Easy Removable Lid – Comes with an easy to remove lid that allows you to add extra ingredients to your sangria like apples, grapes, oranges, pears and any other special addition you would like to add to your beverage..
Check Stock