ReviewsDrip Emitter

Raindrip 100050211 Black 016010T 1/4-Inch by 100-Feet Tubing, 1

  • Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system.
  • for trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in..
  • connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Tubing coil comes shrink wrapped for convenience.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
  • Comes with one 100 ft. coil of ¼ in. poly supply tubing.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

Raindrip Adjustable Flow Bubbler Full-Circle Pattern 8 Stream with 1/4 in Barbed Inlet Single 50-Pack 157050B

  • Releases water in a stream spray, full-circle pattern.
  • amount of water flow is adjusted by turning the dial on the bubbler.
  • Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs.
  • ¼ in. barbed inlet fits into punched hole in supply tubing with outside diameter (OD) 0.250 in..
  • Spray reaches up to 16 in. radius at 40 PSI.
  • Discharge water from 0 to 11.7 GPH at 20 - 40 PSI.
  • As part of a complete drip irrigation system, the emitter delivers water gradually.
  • with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source.
  • Increase or decrease water flow by turning the dial.
  • 8-stream bubbler releases water in a full-circle pattern.
  • Discharge rates from 0 to 11.7 GPH, radius from 0 to 16 in. (at 0-40 PSI).
Check Stock

HOSTK 12PCS Self Watering Spikes, Automatic Plant Waterer, Automatic Irrigation Drippers for Indoor/Outdoor Plant Pots

  • High quality:Professional for 10 pcs white drip emitter curved arrow dripper plants bend sprinklers,wear resistance,good storage,allows you to use for a long time..
  • Effective pressure,dripping precise uniform.Infiltration irrigation,water along the plunger,to avoid soil erosion or matrix..
  • With pressure compensating drippers used in conjunction,to play the role of steady flow.To increase the pressure compensation,and the ability to prevent leakage..
  • Supporting multiple combinations,to meet the various needs of your construction.Basin diameter:within 25cm,insert one.Each additional 5cm,plus one..
  • Specifications:length 10cm,width 0.6cm.Packaging:10 Pcs White Drip Emitters with 10 Pcs 3-Way Connectors..
Check Stock

Mudder 60 Pieces 4GPH Irrigation Drip Emitter Garden Flag Irrigation Dripper, Trees and Shrubs

  • What you receive: package comes with 60 pieces irrigation flag drippers in 4GPH, enough quantity to meet your garden use and daily replacements, 4 gallon is the common and standard size.
  • Durable quality: the garden irrigation dripper is mainly made of quality plastic, not easy to break or deform, with nice resistance to ultraviolet rays, won't corrode or rust, durable to last for long time.
  • Functional design: the garden irrigation emitter is equipped with shut-off valves and 2 barbed pipes in large diameter, these drip emitters can provide stable moisture for different crops, suitable for watering garden plants, landscape plants, shrubs, bushes, etc..
  • Save water resources: these irrigation drippers can control the flow of water per hour to avoid unnecessary wasting, which can save the water needed for irrigation in an efficient way, bringing more convenience for your life.
  • Applicable occasions: the irrigation emitter fits for 1/2 inch trunk lines, also suitable for 1/4 inch branch lines, which can meet your multiple needs, which can be applied for branch lines to irrigate plants further away, allows you to water your entire garden.
Check Stock

Automated Dripworks Drip Tape Irrigation Kit for Watering Row Crops in Farms (with Timer) - Waters Upto 20 100' Rows (1/8 Acre) | Agricultural Grade Components | Trusted Brand Since 1991

  • ...o help you take care of your plants when you are away..
  • Make your own drip tape row crop irrigation system kit easier than ever, run a 3/4 connection from your water source to the watering area. Branch off with the 1/4 drip irrigation tubing and connect the drip irrigation emitters. Stick the dripper stake into the soil, adjust the desired irrigation spray width and feed your plant with your own drip irrigation system. Designed to work with 10 PSI and a maximum output of 60 gallons/hour/emitter..
  • Cut down your water bill - Minimize the amount of water loss by watering the roots of the plants with the drip tape row crop irrigation kit system. Adjust the drip emitters 1/4 by rotating the cap and give your thirsty plants the amount of water they need. Our irrigation system can be used for raised garden bed, as garden watering system for healthy vegetables, automatic watering system for potted plants, drip system for fruit trees, or as patio irrigation kit..
Check Stock

CARPATHEN 100 Drip Irrigation Emitters Vortex - Drip Irrigation Parts for Irrigation Kit - ¼ inch Irrigation Tubing Compatible - 360 deg Adjustable Fan Sprayer for Raised Garden Bed, Potted Plants

  • Be a Gardening Master with the help of our superior and complete Drip Irrigation Emitters Kit: 100 x drip emitters fan shape + 100 x 1/4" Barbed Coupling for easy connection + Bonus 1/4" Mini Hole Punch to drill the 1/2 inch mainline 1 x Complete Instructions Guide Hard Copy + 1 Grow your Own Vegetables Guide full with pieces of advice and practical tips Digital Format + Grow your Own Fruits Guide Digital Format.
  • Cut down your water bill - Minimize the amount of water loss by watering the roots of the plants with irrigation sprinkler heads. Adjust the water spray by rotating the cap and give your thirsty plants the amount of water they need. Our bubbler sprinkler heads can be used as irrigation drippers for potted plants, drip irrigation sprinklers for healthy vegetables, flower bed sprinkler for long-lasting roses, drip line sprinkler heads for fruit trees, or as irrigation drip system for the lawn..
  • Make your own irrigation system easier than ever - (1) Using a barb connector, connect the drip irrigation spray emitters to the 1/4 inch drip irrigation tubing (2) connect this line to 1/2 inch drip irrigation tubing (3) stick the drip irrigation stake into ....
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • ...The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the drip irrigation punch beautiful and....
Check Stock

Rain Bird XFD0912250 XF On Surface Dripline Hose Drip Irrigation Dual Layered Tubing Coil with 0. GPH and 12 Inch Spacing, 250 Feet, Brown

  • DEPENDABLE DRIP TUBE: Dependable 0.5-inch distribution tubing runs water from outside faucet.
  • Dimensions (L x W): 250 feet x 0.5 inches.
  • Connects with 0.5-inch barbed or compression fittings.
  • FLEXIBLE: Offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation.
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi.
  • DUAL-LAYERED: Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage.
  • SPECIFICATIONS: Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings.
  • Use an Air/Vacuum Relief Valve Kit when installation is below soil.
Check Stock

CARPATHEN Drip Irrigation Kit - Adjustable Premium Garden Watering System for Raised Garden Bed, Yard, Lawn or Indoor - Complete Irrigation System with Drip Emitters, 1/4 Tubing and Drip Connectors

  • Be a Gardening Master with the help of our superior and complete Drip Irrigation Kit: 10 Drip Irrigation Emitters Vortex + 20 Drip Emitters Spray + 50ft flexible & durable 5/16 irrigation tubing + 50ft 1/4 inch Drip Irrigation Tubing + 12 tubing coupler + 5 ¼ Tubing Tee Splitter + Tubing End Plugs + Water Connector + 1 x Complete Instructions Guide Hard Copy + 2 Grow your Own Vegetables & Fruits Guide full with pieces of advice and practical tips Digital Format..
  • Cut down your water bill - Minimize the amount of water loss by watering the roots of the plants with the garden drip irrigation system. Adjust the drip emitters 1/4 by rotating the cap and give your thirsty plants the amount of water they need. Our irigation system can be used for raised garden bed, as garden watering system for healthy vegetables, automatic watering system for potted plants, drip system for fruit trees, or as patio irrigation kit. Enjoy healthier plants with less cost and work.
  • Make your own garden irrigation system kit easier than ever: run a 3/4 connection from your water source to the watering area. Use the 5/16 drip irrigation tubing as the mainline. Branch off with the 1/4 d....
Check Stock

CARPATHEN Drip Irrigation Kit for Potted Plants - Adjustable Premium Watering System for Patio Plants - Irrigation System for Hanging Baskets, Raised Garden Beds, Containers - Complete with Drip Emitters, Irrigation Tubing and Drip Connectors

  • BE A GARDENING MASTER WITH THE HELP OF OUR SUPERIOR AND COMPLETE DRIP IRRIGATION KIT: 8 Drip Irrigation Emitters Vortex + 35 ft flexible & durable 5/16” Irrigation Tubing + 35 ft 1/4" Drip Irrigation Tubing + 2 pcs 4 Way Tubing Splitter + 5 pcs 1/4" Tubing End Plugs + Water Connector + 1 x Complete Instructions Guide Hard Copy + 2 Grow your Own Vegetables & Fruits Guide full with pieces of advice and practical tips Digital Format..
  • CUT DOWN YOUR WATER BILL - Minimize the amount of water loss by watering the roots of the plants with the drip irrigation system. Adjust the drip emitters 1/4 by rotating the cap and give your thirsty plants the amount of water they need. Our garden watering system can be used as a raised bed irrigation system, as a plant watering system, as a container irrigation kit or as drip irrigation patio watering kit. Enjoy healthier plants with less cost and work!.
  • MAKE YOUR OWN GARDEN IRRIGATION SYSTEM KIT EASIER THAN EVER: run a 3/4 connection from your water source to the watering area. Use the 5/16 drip line as the mainline. Branch off with the 1/4 drip line irrigation and connect the drip irrigation emitters. Stick the dr....
Check Stock

204Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • ... the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 204 matching kits total, Spray (14 pcs), Micro Drip (12pcs), Tees (50pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs), Straight Barbs (40pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check the size carefully before purchasing；If needed, you can use a hea....
Check Stock