ReviewsDrive Shaft Mounting

Alfa Wheels Electric Scooter Motor Currie Technologies 24 Volt 500 Watt DC for 500 Series Schwinn & IZIP Reversible with 11 Tooth Sprocket #25 Chain Model Numbers XYD-6B SD-156 XYDJ130601664

APPLICATIONS: This electric scooter motor from Currie Technologies can be used for scooters, for Mini Bikes quad and Go-Karts using 450W or 500W motors with similar mounting brackets., for bicycles and for do it yourself enthusiasts who would like to use it for diverse applications. This motor should work with Schwin and IZIP 500 series electric scooters. This electric motor should also work with any other brand with similar specs..
MOTOR SPECS: Model XYD-6B Motor, Type Brush, Voltage 24 Volt DC, Output 500 Watts, Rated Speed 2600 Rpm, Rated Current 28 Amp, Sprocket #25 Chain 11 Tooth, Rotation Reversible, Removable Set-Screw Sprocket, This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires..
COMPATIBILITY: Currie Technologies part number SD-156, OEM motor on 500 Series Schwinn & IZIP electric scooters (chain drive) compatible with eZip E-500, GT-500, IZIP I-500, Mongoose M500, Schwinn S500..
DIMENSIONS: Case Length 3-7/8" (98 mm), Case Diameter 3-15/16" (100 mm), Drive Shaft Length 1/2" (13 mm), Drive Shaft Diameter 3/8" (10 mm), Mounting Hole Distance 3-15/16" (100 mm), Center to center mounting hole distances approximately 3-7/8.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Class 30 gray cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Class 30 gray cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.