ReviewsDrive Sprocket

CDHPOWER 29'/700C Black Aluminum Mag Wheels - 66cc/80CC Gas Motorized Bicycle

Please note£ºexcluding bolts, size of Bolts to mag wheel:M5x23mm, if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles.
do not need adapter, sprocket only needed.
put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding£»inner diameter of rim:17.5mm/0.689inch.
Aluminum Wheels Excluding chain drive Sprocket£»Thread size: 1.375 inch X24T.
the hole spacing for front and rear wheel both 44mm, please see the last picture£»NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned..
Size for Wheel Axle: LxT(front axle): 160mm x 10mm.
light and very durable. 29"/700c Size Wheel.
the hole spacing for front disc brakes of mag wheel to be added is 44mm.
PLEASE NOTE 1: the best safe speed if racing: 35km/h£»Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel, buyer need drill 6 holes in middle to make sprocket fit on the alum wheel or buyer buy CDH multifunctional sprocket which fits well on CDH alum wheel.

Drive Chain with Front and Rear Sprockets Kit.
Includes: Drive Chain with Master Link and Rivet Link (Tensile Strength of 6000 pounds). / Front Sprocket 13 Teeth / Rear Sprocket 48 Teeth.
We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..

✅Quality Ensurance for More Power: This go-kart torque converter is made of high-quality iron and aluminum material which is lightweighted, sturdy and durable while allows higher speeds out of small engine, and smoother acceleration. This clutch will help you get more power out of your small engine by reducing engine load..
✅Complete Parts for Easy Assembly: This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Important parts have been assemblied.
✅Universally Fit: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.
✅Package Includes: 1 x 3/4" Driver Pulley.
1 x 10 Tooth Sprocket for #40/41/420 Chain.
1 x 12 Tooth Sprocket for #35 Chain(Chain not included).

Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings, instructions.
Compatible with chain drive chamberlain sears craftsman manufactured operators 1984-current.
Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.
Verified 100% authentic OEM lift master product- new production dates.

Replaces Front Sprocket OEM Parts: KTM 79233029014, 79233129014, Husqvarna 79233029014, 79233129014.
Replaces Rear Sprocket OEM Parts: KTM 7771015104501, 58310151045, 75010051045, 7771095104504, 5831015104504, Husqvarna 58310151045, 75010051045, 7771015104530.
Drive Chain Maximum Tensile Strength: 38000KN.
Sprocket Material consists of SAE 1023 structural carbon steel.

Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings.
Compatible with chain drive chamberlain sears craftsman operators 1984-current.
Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models, replacement parts.

Compatible with chain drive chamberlain sears craftsman manufactured operators 1984-current..
Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models..
Any questions when installing? Please contact us ( [email protected] )and we will provide one-to-one guidance...

Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current).
Replaces sprocket coupler on screw drive rail assemblies..
Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current), models 1000SD, 2000SD, 1000SDR, 2000SDR, 2110, 2220, and models 4600, 4620, 4640, 9902, PD420, PD460.

Verified 100% authentic OEM lift master product- new production dates.
Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.
Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings, instructions.
Compatible with chain drive chamberlain sears craftsman manufactured operators 1984-current.

Kit Includes: Gear and sprocket, Worm gear, Grease,Motor shaft bearings, Sprocket bearings..
Compatible with chain drive Chamberlain sears Craftsman operators 1984-current..
Compatible with Chamberlain, Sears, Craftsman and lift master 1/3 and 1/2 HP chain drive models, Replacement parts..
Any question,Please contact us .We will reply ASAP.

Drive Chain with Front and Rear Sprockets.
Compatible with following Honda models: CBR1000RR Fireblade 2006-2016.
Compatible with following Honda models: CBR1000RA Fireblade ABS 2010-2016.
Order Includes: Drive Chain with Master Link and Rivet Link (Tensile Strength 8200 pounds), Front Sprocket 16 Teeth / Material: Steel, Rear Sprocket 42 Teeth / Material: C49 High Carbon Steel.