ReviewsDriver Kit

Behappy Cordless Drill Combo Kit, 1000ln-lbs Drill Driver and 2600In-lbs Impact Driver 21V, Brushless Power Tool Kit with 2 Lithium-Ion Batteries, 1Charger

【1/2 Inch Drill Driver】The power drill with a max 21V can provide 1000in-lb (110Nm) torque, and the 19+1-position clutch has three modes for you to choose from (impact, drive, drilling). At the same time, it has 2 speed transmissions (0-500RPM/0-2000RPM), thus avoiding overdriving screws. The drill driver can handle most drilling and driving tasks..
【1/4 Inch Impact Driver】The impact driver can generate up to 2600 in-lb（300Nm） torque, while the variable speed switch provides 0-2600RPM and 0-3300IPM, which can accommodate a wide range of drilling and screw-driving applications. You can also change the desired rotation direction of the drill by changing the rotation direction selector..
【Brushless Design】 The brushless drill combo kit is different from the traditional brushed drill, eliminating the need for the conductive carbon brush of the traditional brushed motor, no maintenance, the failure rate will be lower in comparison, the operating time and voltage will be more stable. The power drill combo kit will also have a longer service life, with less interference with radio equipment and less noise..
【Ergonomic Design and LED Lights】The non-slip handle of the brushless drill combo kit is made of soft rubber, which is ergonomical....

Check Stock

DEWALT 20V MAX Power Tool Combo Kit, 4-Tool Cordless Power Tool Set with 2 Batteries and Charger (DCK444C2)

DCD771 Drill/Driver in the cordless drill combo kit is compact (front to back) and lightweight, designed to fit into tight areas.
DCF885 Impact driver in the cordless tools combo kit offers 1-handed loading for its 1/4-inch hex chuck and accepts 1-inch bit tips.
DCS355 Oscillating tool in the drill/ impact driver combo kit offers a Quick-Change accessory system that allows blades and attachments to be changed quickly without wrenches..
DCL040 LED Light helps illuminate your work area with an output of 110 lumens..

Check Stock

Bosch 18V 2-Tool Combo Kit with 1/2 In. Compact Drill/Driver and 1/4 In. Hex Impact Driver GXL18V-26B22

COMBO KIT: The Bosch GXL18V-26B22 is a reliable compact combo kit that includes two 18V tools (impact driver and drill/driver) designed to fit in tight areas and to provide Pro performance, along with two 2.0 Ah 18V batteries and a charger.
EFFICIENT: Featuring an efficient impact driver hammer-and-anvil system, the combo kit delivers Pro performance, with 1, 400 in.-Lbs. of max. torque in a lightweight tool that weighs just 2.4 lbs.
LIGHTWEIGHT: The included drill features a light but powerful drill motor that provides outstanding drilling production in a tool that weighs just 2.8 lbs..
VARIABLE SPEED: Featuring a variable-speed drill that furnishes control for high-speed (0-1, 700 no-load RPM) and high-power (0-450 no-load RPM)..
POWER: With a robust impact driver motor, the Bosch GXL18V-26B22 delivers a max. Of 3, 600 BPM for professional power..

Check Stock

Bosch CLPK22-120-RT 12 Volt Li-Ion 2-Tool Combo Kit Drill/Driver and Impact Driver (Renewed)

Product 1: Power: This Bosch drill kit includes a powerful 12 volt drill driver with up to 1,300 RPM and a 12 volt driver with up to 2,600 RPM.
Product 1: Compact: The lightweight design of the PS31-2A drill driver is ideal for easy handling in overhead operations and tight spaces and the PS41-2A impact driver offers the precision of variable speed, a light-body, and a short-head length.
Product 1: Control and visibility: The Bosch cordless drill is easy to handle in tight, narrow spaces, and three integrated LED lights mounted around the head of the driver enable high performance in low-light settings.
Product 1: Durability: Robust and compact with lightweight design, the drill impact driver combo kit is built to last and backed by a three year protection plan.
Product 2: 10x life over standard impact bits.
Product 2: Extended torsion zone helps to absorb high-torque of new impact drivers.
Product 2: Precision-engineered tips for a tighter fit and less CAM out.
Product 2: Heat-treated manufacturing for stronger bit.

Check Stock

Bosch 18V 4-Tool Combo Kit with Compact Tough Drill/Driver Impact Driver Compact Reciprocating Saw LED Work Light CLPK496A-181

4-TOOL KIT: This combo kit includes Bosch DDS181A Compact Tough 1/2 In. drill/driver, 25618 1/4 In. hex impact driver, GSA18V-083 reciprocating saw,....
POWER: The included DDS181A Compact Tough Drill/Driver features design with 600 in.-lbs. of torque with an all-metal chuck.
SPEED: The 25618 Impact Driver produces up to 1,500 in.-lbs. of max torque. It’s a fast driver, generating up to 2,800 rpm and up to 3,200 bpm and....
LIGHTWEIGHT: The GSA18V-083 Reciprocating Saw features a lightweight, compact design for use in very tight work spaces. It features optimized....
VERSATILE: The GLI18V-420 18V Flashlight provides three innovative LEDs that supply very bright light of 420 lm and an adjustable light beam, spot or....

Check Stock

DEWALT 20V Max XR Cordless Drill Combo Kit, Brushless, 2-Tool (DCK283D2)

Brushless motor of cordless drill combo kit delivers up to 57% more runtime over brushed.
XR Lithium Ion batteries with fuel gauge in cordless tools combo kit provide 33% more capacity over standard packs.
DCD791 20V max 1/2-inch Drill/Driver in the drill/ impact driver combo kit has a compact (6.9-inch front to back) and lightweight (3.4 lbs.) design to fit into tight areas.
DCF887 20V max 1/4-inch Impact Driver has a compact (5.3-inch front to back) design to fit into tight areas.
DCD791 features a 3-mode LED with 20-minute trigger release delay in Spotlight Mode, providing increased visibility in dark or confined spaces.
DCF887 features 3 LEDs imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces.

Check Stock

WEISHUJI RC Tools Kit Organizers,Screw Driver RC Tools Kit Organizers,Screwdriver Storage Rack Bulit-in Screw Tray Screw Driver Pliers for Hex Cross Screw Driver RC Tools Kit Organizers

❤【How to Install】Metal Fixed Column are different in length. Two of the long Metal Fixed Column are stacked on top of each other to assemble the high platform. Four short Metal Fixed Column are used to assemble the low platform. Please follow the ad pictures instruction if you have any assembly problems..
Screw Driver RC Tools Kit Organizers is used for Screwdriver Tools Kit Set, Screws,Screw Driver RC Tools Kit Organizers is for Wire Cutter, Pliers, Scissors,ect..
Screwdriver Storage Rack helps keep your RC tools organized and Screwdriver Storage Rack reduces workbench clutter..
RC Tools Kit Organizers is made of high-quality aluminum alloy, RC Tools Kit Organizer is durable rust-free and corrosion-resistant,greatly suitable for advanced rc model..
Package of Screw Driver RC Tools Kit Organizers includes: 1 x Metal Bottom Board 3 x Metal Holes Fixed Plate 4 x Metal Fixed Column (Long) 8 x Metal Fixed Column (Short) 4 x Long Screws 4 x Short Screws.

Check Stock

Klein Tools 80019 Tool Set, Multi-Bit Screwdriver and Nut Driver Tool Kit, 28 Different Industrial Strength Bits and Sizes, 4-Piece

Multi-Bit Screwdriver Tool Kit is the ideal 4-Piece Multi-Bit Tool Kit for any professional.
Multi-Bit Screwdriver / Nut Driver, 11-in-1 (Cat. No. 32500) holds 8 popular tips (Phillips, Slotted, Square, Torx Bits) and converts to 3 nut driver sizes.
Multi-Bit Electronics Screwdriver, 4-in-1, Phillips, Slotted Bits (Cat. No. 32581) has four different non-magnetic tips in one tool, includes #0 and #00 Phillips plus 1/8-Inch (3.2 mm) and 3/32-Inch (2.4 mm) Slotted tips.
Multi-Bit Screwdriver / Nut Driver, 6-in-1, Stubby, Phillips, Slotted Bits (Cat. No. 32561) has a compact interchangeable shaft that holds 4 universal tips and converts to 2 nut driver sizes.
INCLUDES: Non-magnetic Nut Driver sizes 1/4-Inch and 5/16-Inch and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) Slotted.

Check Stock

E-cowlboy T-0220-700R4 Bushing Seal Installer Remover Tool Kit Driver Kit/Tool for GM 700-R4 4L60 4L60E 4L65E Transmission (13pc)

COMPATIBILITY -- This 13 piece bushing driver kit is design to help PROPERLY rebuild for the 700R4 (700-R4) (4L60) (4L60E) (4L65E) transmissions..
SUPERIOR QUALITY – Made of high quality solid steel and manufactured to meet the OEM specifications and performance, resisting rust and corrsion, ensures an unparalleled long lifespan..
EXCELLENT DESIGN -- Comparable to Atec Trans-Tool K&K OTC Kent-Moore SPX T-0220, T-0220-700R4, SKU311. Bushing driver handle included mounting board easily mounts to wall for easy access!.
KIT CONTENT -- Includes 12 Bushing Drivers (#61-71) and one Driver Handle, which are all placed in a black blow mold case (13-in-1) for easy storage and transportation. With this case, job would be done quickly..
100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with our Bushing Driver Kit, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..

Check Stock

Hitachi KC18DG4LS 18V Li-Ion 4 Piece Combo Kit

Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
Kit includes the DV18DGL 18V Lithium Ion Hammer Drill that boasts 487 in/lbs. of torque in an ergonomic, lightweight (3.8 lbs.) design.
Kit includes the WH18DGL 18V Lithium Ion Impact Driver that weighs only 3.1 lbs., yet still delivers 1,280 in/lbs. of driving torque for heavier applications.
Kit includes the CR18DGL 18V Lithium Ion Reciprocating Saw has a 1" stroke length and 3,300 SPM to allow for easy and fast cutting.
Kit includes the UB18DEL 18V Lithium Ion LED Flashlight for high visibility in a free standing design for convenience.
Kit also includes the UC18YKSL quick charger, Phillips #2 Driver bit and carrying bag.

Check Stock

DCK Impact Driver, 20V Max Brushless Cordless Impact Driver Kit, 1600 In-lb, 1/4" All Metal Hex, Variable Speeds, 4.0Ah Battery & Charger, 42 pcs Bits, Power Impact Driver for Metal, Wood (KDPL03-14)

...argers for worry-free, long-lasting protection. Search "DCK battery" or "DCK charger" on Amazon and you will find it..
[Powerful Brushless Motor] The brushless motor is more suited to cordless tools. Compared to a brushed motor, a brushless motor impact driver performs better, lasts longer, and is cheaper, providing greater productivity on the job. The DCK 20V impact driver kit with variable speeds up to 2000 r/min and high torque up to 1600 inch-lbs, allows our power impact driver to drive screws or tighten nuts at impressive speeds. It's suitable for metal, wood, parts mounting, etc..
[Smart Loosen Technology & 1/4" All Metal Chuck] Smart loosen mode turns on when the green light on the cordless impact drill battery is on. It will automatically stop when tightening screws, providing excellent speed and torque balance for a wide range of uses. The speed is controlled by pressing the variable speed switch, the higher the pressure, the higher the speed. The 1/4" all metal hex impact driver for quick change chuck will improve work efficiency and save working time..

Check Stock