ReviewsDropout Fuse Cutout

Bussmann BK/HKP-HH Panel Mounted Fuse Holder (Pack of 1)

2 kinds of fuse holder with quick blow glass tube fuse, suits for Car Radio Audio DIY project..
In-line screw type fuse holder, with 22 AWG wire, suitable for 5x20mm glass fuse..
Panel mounted fuse holder, with screw cap and soldering terminals, rated voltage : AC 15A 125V, AC 10A 250V..
10 different value glass fuse assortment, including 20pcs fuse 0.2A, 0.5, 1A, 2A, 3A, 5A, 6A, 8A, 10A, 15A, 10 pcs each value..
Package Content: 5 * fuse holder in-line screw type + 5 * panel mounted fuse holder + 100 * quick blow glass tube fuses..

Check Stock

Marine Fuse Block, 12V Fuse Box with LED Warning Indicator Damp-Proof Cover 12 Circuit Independent Positive Negative Fuse Panel with Negative Bus Fuse Box for 12V/24V Vehicle Car Boat Auto (12-Way)

✔️[CONVENIENT INDICATION] When a blown fuse is detected, the associated red LED warning light will immediately illuminate, reminding you to check and replace the blown fuse. The car fuse box will indicate exactly where there is a short circuit or any other fault, and it reminds you to check and replace the blown fuse..
✔️[STRUCTURE] The fuse box is suitable for ATC/ATO (medium size) fuses which have positive and negative terminals, which means that for each positive terminal there is a negative terminal. to keep all wires neat and organized, not a mess of wires and fuse holders stacked on the battery terminals. All bus bars and fuse blocks in the fuse box are nickel-plated copper for corrosion resistance and high conductivity.The marine fuse block is mechanically strong, insulated, heat resistant.
✔️[SUPERIOR MATERIAL] The 12v fuse box is made of environmentally friendly PBT material with a transparent fuse protector insulated cover with a black push-lock system that allows the cover to be easily opened by pressing. In addition, this transparent design also helps to add extra protection to the fuse panel and fuses. The fuse box holder features LED i....

Check Stock

Marine Fuse Block, 12V Fuse Box with LED Warning Indicator Damp-Proof Cover 12 Circuit Independent Positive Negative Fuse Panel with Negative Bus Fuse Box for 12V/24V Vehicle Car Boat Auto (6-Way)

✔️[CONVENIENT INDICATION] When a blown fuse is detected, the associated red LED warning light will immediately illuminate, reminding you to check and replace the blown fuse. The car fuse box will indicate exactly where there is a short circuit or any other fault, and it reminds you to check and replace the blown fuse..
✔️[STRUCTURE] The fuse box is suitable for ATC/ATO (medium size) fuses which have positive and negative terminals, which means that for each positive terminal there is a negative terminal. to keep all wires neat and organized, not a mess of wires and fuse holders stacked on the battery terminals. All bus bars and fuse blocks in the fuse box are nickel-plated copper for corrosion resistance and high conductivity.The marine fuse block is mechanically strong, insulated, heat resistant.
✔️[SUPERIOR MATERIAL] The 12v fuse box is made of environmentally friendly PBT material with a transparent fuse protector insulated cover with a black push-lock system that allows the cover to be easily opened by pressing. In addition, this transparent design also helps to add extra protection to the fuse panel and fuses. The fuse box holder features LED indicators and a sturdy construction. This 12 volt 12-way fuse block meets all the criter....

Check Stock

Fuse Holder, Ardor 4 Gauge or 8 Gauge in-Line AGU Fuse Holder with 1PC 80A AGU Fuse for Car Audio Alarm Amplifier Truck Audio(AR1122N)

【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very practical fuse holder..
【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
【Multipurpose Fuse Holder】AGU fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
【You Will Get】You will get 1 fuse holder with 1 80A AGU fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..

Check Stock

Inline Fuse Holder, Ardor 4GA or 8GA in-Line Mini ANL (AFS) Fuse Holder with 1PC 80A Fuse for Car Audio Alarm Amplifier (AR1130N)

【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very worthable fuse holder..
【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
【Multipurpose Fuse Holder】Mini ANL (AFS) fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
【You Will Get】You will get 1 fuse holder with 1 80A Mini ANL (AFS) fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..

Check Stock

Beaquicy Microwave Fuse 20 Amp 250V Ceramic Fuse Cartridge Fuse Slow-Blow WB27X10388 Replacement for G-E Ken-More Microwave (5-Pack)

✅【20Amp 250V】: The package includes 5 x ceramic slow blow fuse. This microwave fuse shuts down the microwave oven in case of a power surge, preventing the microwave oven from receiving damage during a surge. The fuse has a width of 0.25 inches and a height of 1.16 inches. 20a fuse is made of ceramic and its rated specification is: 20Amp, 250V. Replacing ge microwave fuse solves the FOLLOWING SYMPTOMS: ►Abnormal current, generating heat ►The circuit operate unsafely ►Microwave fuse blown..
✅【5pcs CERAMIC FUSES】:5-Pack 250v 20a fuse microwave is made of durable high quality ceramic. The high quality ceramic material makes 20 amp fuse better able to achieve the effect of power failure. When the current abnormally increases to a certain level and generates heat, it will break, thus protecting the safe operation of the circuit. The since surges do not disappear when the power is disconnected, it is necessary to install this fuse to protect the microwave's electrical panel..
✅【GE/KENMORE MICROWAVES】:The 20Amp Ceramic Cartridge Fuse replaces:875392, AP3994062, PS1481237, EAP1481237, WB27X10928, WB27X10388. COMPATIBLE WITH: JVM2052DN1WW, JVM2052....

Check Stock

YOTINO 12V 24V Standard Add-a-Circuit Fuse Tap, ACU Medium Piggy Back Blade Fuse Holder with Wire Harness, 6 pcs Standard Fuse (3A 5A 7.5A 10A 15A 20A) and Fuse Puller (Pack of 4)

FITS YOUR VEHICLEATO ATC standard 6.3mm blade fuses and stand up to 20 AMP each slot, suitable for any vehicle with a standard fuse slot.
INSTALL APPLICATIONSYOTINO 12v/24v add-a-circuit kit makes your car battery positive so you can hardwire a 12V radio, LED light strip, dash cam, GPS, backup camera or any other small electronic device that requires direct wiring into the fuse box.
NO SPLICING REQUIREDAdd devices and accessories to your vehicle with compatible sized fuses without cutting into wires,2 fuse slot providing protection for existing/new circuits, tap the fuse box to power additional electronic devices with no need to cut or splice.
EASY INSTALLATION1. Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap. 2. Insert a suitable fuse for the new accessory in to the top slot. 3. Crimp your new live wire to the butt terminal on the fuse tap.
PACKAGE CONTENT4 pack fuse holder kit, 1 pcs fuse puller and 6 pcs standard fuse (3A 5A 7.5A 10A 15A 20A)total 19 pcs accessories referring picture 1.

Check Stock

WUPP Boat Fuse Block Marine Fuse Panel with LED Warning Indicator Damp-Proof Cover - 12 Circuits with Negative Bus Fuse Box Holder for Car Marine RV Truck DC 12-24V Fuses Included

【QUICK FIX】 – Red LED warning light will light up immediately when the corresponding fuse is blown. WUPP Automotive fuse block will indicate exactly where there is a short circuit or any other fault so you can easily identify it and change it!.
【MAKE WIRING CLEAN】 – Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 12 dedicated fuses and 12 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!.
【SAFE MATERIAL】– Made of environment-friendly PBT material, WUPP 12-volt fuse block meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon.
【UNIVERSAL PROTECTION】– Whether you're building a massive overland lighting setup or adding power windows to your classic. WUPP fuse block with 100 Amps capacity, 30 Amps per fuse, and ground bus bar are more than capable of protecting all of your hard work..
【FREE BLADE FUSES】– 12-Way Fuse Block Package includes: 20A Fuse*6, 15A Fuse*6, 10A Fuse*6, 5A Fuse*6, Labels*....

Check Stock

VANTRONIK Fuse Puller for Car Boat Blade Fuse Mini Fuse and Standard Fuse 3 Pack

Package includes: you will receive 3 pieces of fuse pulling tools..
Safety protection: When the fuse gose wrong, you can handle it directly with your fingers, but sometimes it may still not work.
Using the car fuse fetch clips is more effective to solve the problems, while please be careful not to clamp the fuse too tight.
Quality material: the automobile fuse pullers are made of reliable plastic material, not easy to break or chip, durable and fully insulated..
Anti-skid grip: the yellow fuse removal tools adopt a textured design, which looks stylish and are convenient for you to control the fuse firmly and tightly without slipping, and then easy to remove or replace cartridge fuse.
Mini size: the dimension of the mini plastic fuse pullers measures approx. 3 x 1 cm/ 1.18 x 0.39 inches.

Check Stock

InstallGear 0/2/4 Gauge AWG in-Line ANL Fuse Holder with 150 Amp Fuse

LED WARNING INDICATOR: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse..
WIDE USE: This fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
widely used in vehicle, car, marine , bus, ship, tanker, subway etc.
PREMIUM QUALITY: The 6 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. The fuse box has LED light indicators and a strong construction for guaranteed results.base:PBT,cap:PC,terminal:Nickel plated copper,screw:Stainless steel,label:PP*70.
EASY TO SET UP: No need to worry about getting your fuse box ready to use. This 6 circuit fuse box holder with ground is very easy to install..
WITH COVER AND FUSE: Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With 12 pcs Blade fuse 2 ....

Check Stock

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....

Check Stock