ReviewsDry Pipe Valve

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
  • Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
  • This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stock

BrassCraft PSBV503-8 Gas Shut Off Valve

  • Large gas outlet box for recessed valve installation.
  • Four molded-in flanges for easy and secure installation.
  • Flat-sided walls ensure a rigid mount against the stud bay.
  • Available with 1/2-inch-iron-pipe, 1/2-inch-CSST-tubing, or 3/4-inch-iron-pipe valve.
Check Stock

EXCELFU RV City Water Fill Inlet Flange Brass with Check Valve, RV Water Inlet Connection 1/2" NPT, City Water Inlet for RV Camper Motorhome Trailer Marine

  • RV City Water Inlet Replacement: Direct OEM replacement of rv city water inlet..
  • Specification of RV Water Inlet: The rv water inlet connection check valve is with 1/2" NPT male threaded pipe on the inside, 3/4" GHT female threaded pipe on the outside, flange thread is 3" diameter..
  • RV City Water Inlet with Check Valve: Built in check valve/back flow preventer and easy to install this city water check valve inside your RV's fresh water system, no more leaking when use tank and pump for water and save water for your RV..
  • Brass RV City Water Flange: The pipe threads of RV water fill inlet is constructed of durable solid brass instead of the plastic. Fine workmanship with precise thread to reduce leaks and resistant to rust, UV light, daily wear and road salts. Made to extend the life of your hose..
  • City Water Inlet for RV: City water connection inlet flanges connet trailer marine RV camper to city water hoses, keeps contaminants out of your fresh water system. Easy-grip knob allows easily attach and detach the hose..
Check Stock

JUSTOGO Backflow Preventer Cover Insulation Pouch, Pipe Insulation Sprinkler Valve Cover with Reflective Strip,Irrigation Backflow Preventers Protection Insulated Cover Pouch (16\W x 20\H )

  • 【Size: 16"W x 20"H】Outside dimensions, fit up to 14" wide backflow valves system. Measured your pipeline before purchasing, and reserve 2 inch or above . Our insulation pouches for backflow with reflective strip makes it easy to see it at night, without bumping into it. Suitable for all industrial ,home ,and commercial buildings. Perfect protection for your backflow preventer sprinkling system,ground anti-siphon valves,and irrigation vacuum brake valve..
  • 【Insulation & Waterproof】 This insulation pouch is made of heavy duty material 210D oxford fabric and industrial grade insulation EVA rubber foam, Waterproof, Cold resistance, and Heat preservation. Triple stitching for max security, both insulation and waterproof effect. Our backflow preventer cover with heat absorption principle of black, double freeze-proofing, durable in use and resistant to dirt. Provide you the best backflow preventers protection..
  • 【Easy to Use】No tool, you can place backflow preventer cover on the backflow pipe systems or yard hydrantand, fasten it with the rope on bottom easily ,without worry dogs or wind get it away. Suitable for water valve cover, well pipe cover, irrigation covers, and sprinkler valve cover..
  • 【Save High Repair Costs】Our pipe insulation cover p....
Check Stock

IRWIN Tools 250 Magnetic Torpedo, 9-Inch (1794153),Blue

  • Die-cast aluminum level construction for extreme durability and strength.
  • B-Tank valve key provides the ability to open an acetylene tank valve without stripping.
  • Plumb Site offers dual-sided torpedo level viewing for easier and more accurate plumb readings.
  • 1.5° integrated button with a slight radius ensures the level sits securely on the pipe for easy 1/4-inch-per-foot drainage.
  • Rare earth magnets are 5x stronger than strip magnets and allow the level to be used for easy, hands-free steel construction work.
Check Stock

APHRODITE 300W Mini High Temperature Sterilizer Medical Autoclave Equipment 1.5L

  • Spring safety valve, overpressure auto-discharging 0.145-0.165Mpa..
  • The highest working temperature126°C-128°C.
  • The tank contains dry burning-resistant reinforced type electric heat pipe..
Check Stock

RALBDX Universal Electric Exhaust Remote Controller Motor E-cut Dual Out Valve Electric Exhaust Cutout 2.5 inch Y Pipe with Remote Kit (2.5“)

  • Exhaust cutout Fit For 2.5"/63mm exhaust system,Two valves/flaps type..
  • Dual Valve Electric Y Pipe with Remote Kit.
  • 2.5 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it.Professional installation is highly recommended.
Check Stock

1/4\ NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..
Check Stock

PumpSpy Silent Sewage or Sump Pump Check Valve 2-Inch Check Valve Stainless Clamps Fit 7-1/4 Gap in 2-Inch Schedule 40 PVC Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Increase

  • QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
  • CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
  • INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 2" Schedule 40 pipe. Fits within a 7-1/4" gap..
  • KEEP WATER OUT: This check valve is designed to keep pumped contents within the discharge pipe from falling back into the sump basin. A fully functional check valve can increase pump life expectancy by preventing contents from being pumped twice..
  • ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevent costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working properly..
Check Stock

PumpSpy Silent Sump Pump Check Valve - 1-1/2 with Buna-N Couplings Model CV-150 Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Expectancy Increase Includes Steel Clamps Fit 1-1/2″ Pipe

  • QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
  • CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
  • INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 1-1/2" Schedule 40 pipe. Fits within a 5-1/8" gap..
  • KEEP WATER OUT: This check valve is designed to keep pumped water within the discharge pipe from falling back into the sump basin. A fully functional sump pump check valve can increase pump life expectancy by preventing water from being pumped twice..
  • ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevents costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working pr....
Check Stock

PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water

  • INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily without the hassle of shutting off the water. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water where you want it to go..
  • LEAD FREE COPPER CONSTRUCTION allows you to safely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole..
  • HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper saddle valve is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly..
  • LIMITED LIFETIME WARRANTY. For use with 3/8” to 3/4″ copper pipe. 1/4 inch outer diameter outle....
Check Stock