ReviewsDry Strength Resin

SOLAREZ UV Cure Polyester Ding Resin - Surfboard Repair Kit (2 Oz) Sun Cures 100% Dry in Under 3 Minutes! Includes 60/240 Grit Sand Pad. Made in The USA!

Includes Solarez UV Cure Polyester Resin & 60/240 Grit Sand Pad.
A mixture of clear, non-yellowing, high strength, fiber reinforced polyester resin and an amazing solar activated catalyst..
Proprietary formula assures that millions of fiberglass fibers are throughly wet-out and evenly dispersed in every dose..
These resins cure exceptionally dry unlike other UV cure resins that cure tacky..

Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

...est System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.

Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

...stem 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.

Check Stock

TotalBoat 5:1 Epoxy Resin Kit (Quart, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

PREMIUM EPOXY KITS include enough 5 to 1 marine epoxy resin and hardener to complete a variety of boat building and epoxy repair projects For wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel and lead Not for clear-coating projects.
IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics Self-leveling properties ideal for coating and laminating Combine with fillers to make a high-strength, moisture-resistant fairing compound, filleting material or adhesive.
CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 min at 75F for Fast Hardener, to 20 minutes at 75F for Slow Hardener Cures to a high-strength, moisture-resistant, light amber plastic solid that can be sanded and shaped.
CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin.

Check Stock

VICKJES Windshield Repair Kit, 4 Pcs Car Glass Repair Kit, Windshield Crack Repair Kit, Glass Repair Fluid Quick Fix for Chips, Cracks, Star-Shaped Crack

...o mixing required,windshield chip repair kit quickly and efficiently repairs small damage in 20-30 minutes,window repair kit saving a lot of time and money and restoring windshields to near-new condition, Long lasting maintenance effect..
【2022 UPGRADE RECIPE】The upgraded version of glass repair fluid, the shear strength can reach 20P--A, even if the glass is broken, it will not affect the repair position. Enhanced injection head, unique vacuum design, push the windshield repair resin into the crack, which can prevent air from entering between the gels and affect the repair effect. cracked windshield repair kit can pressurize the resin for better penetration into chips or cracks..
【Windshield Crack Repair kit is easy to use】When you use the window crack repair kit, first clean and dry the glass surface, then squeeze the resin into the crack, apply the curing film, then place the car in the sun, dry and bond the car for 5-20 minutes, and remove with a scraper, residual glass repair solution..
【WINDSHIELD CHIP REPAIR KIT WIDE APPLICATION 】Automotive Windshield Repair Kits are designed to repair all types of laminated windshield shards and cracks such as bugs, cobwebs, bull's eyes, half-moon cracks, star damage and cracks smaller than 12"/30cm ....

Check Stock

Kuraray 502KA PANAVIA F 2.0 Complete Kit, White

Reliable universal adhesive resin cement.
Anaerobic and dual-curing adhesive resin cement.
Cement maintains its high mechanical strength due to the special surface coating technology of sodium fluoride.
Convenient working and setting times with high bond strength.

Check Stock

FiberWeld Pipe Repair Cast 2x48 Inch – High Strength Adhesive Fiberglass Wrap – White

J-B Weld FiberWeld 1” Pipe Repair Cast: A high-strength one-time use fiberglass wrap, impregnated with a specially formulated anti-corrosive resin providing a permanent & protective adhesion to a wide variety of pipes. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. All you have to do is wet, apply and let it dry and in 15 minutes it hardens like steel!.
Cure and Set Time: Once the product is dipped in water for 5-7 seconds, you will have between 5-10 minutes to work with the product and then it will fully cure in 15 minutes!.
Product Features and Strength: J-B Weld FiberWeld 1” Pipe Repair Cast can withstand household water pressure and has a bend strength of 1800 PSI. Once the product is fully cured, it can be sanded and painted! The kit includes a pair of gloves, an epoxy putty stick and a securing bandage!.
Great For Repairs On: Copper, Cast Iron, PVC, ABS, Galvanized Steel, Rubber and more!.

Check Stock

Solarez UV Cure Polyester Ding Repair - Surfboard Repair Kit (Weenie 0.5 Oz) Sun Cures 100% Dry in Under 3 Minutes! Includes 60/240 Grit Sand Pad. Perfect Quick Repairs! Eco-Friendly! Made in The USA!

Clear, Non-Yellowing, High Strength, Fiber Reinforced Polyester Resin and Amazing Solar Activated Catalyst..
Millions of Fiberglass Fibers are Evenly Dispersed in Every Application..
Denser Cross-Linking and Even Surface Cure.
Unlike other UV cure resins that cure tacky..
Includes Solarez UV Cure Polyester Resin & 60/240 Grit Sand Pad.

Check Stock

UNIIOON Windshield Repair Kit, 4 Pcs Car Glass Repair Kit, Windshield Chips Scratch Repair Remover Kit, Automotive Glass Quick Fix for Chips, Cracks, Star-Shaped Crack, Bulls-Eye

...d glass repair kit, no mixing required, windshield chip repair kit quickly and efficiently repairs small damage in 20-30 minutes, Save your budget and stop spreading of car glass chips and cracks, restoring windshields to near new condition..
2023 UPGRADE RECIPE: The upgraded version of glass repair fluid, the shear strength can reach 20P--A, even if the glass is broken, it will not affect the repair position. Enhanced injection head, unique vacuum design, push the windshield repair resin into the crack, which can prevent air from entering between the gels and affect the repair effect. cracked windshield repair kit can pressurize the resin for better penetration into chips or cracks..
QUICKLY REPAIR: When you use the window crack repair kit, first clean and dry the glass surface, then squeeze the resin into the crack, apply the curing film, then place the car in the sun, dry and bond the car for 5-20 minutes, and remove with a scraper, residual glass repair solution..
WIDE APPLICATION: Automotive Windshield Repair Kits are designed to repair all types of laminated windshield shards and cracks such as bugs, cobwebs, bull's eyes, half-moon cracks, star damage and cracks smaller than 12"/30cm and Spherical lesions less than 1 inch in diameter were the best....

Check Stock

Boardwalk Z4833RNKR01 Waste Can Liners, 12-16gal, 24 x 33, 6mic, Natural (20 Rolls/Carton, 50 Bags/Roll)

High Density Polyethylene Provides Excellent Lifting Strength.
High Density Resin Offers Excellent Value.

Check Stock

LET'S RESIN 30pcs Resin Jewelry Molds,Jewelry Molds for Resin Casting,Resin Silicone Molds kit with Bracelet Molds,Pendant Molds,Ring Molds for UV Resin,Epoxy Resin

...olds and 50 x screw eye pins. Great variety of jewelry resin molds to save your time and money, especially suitable for beginners who are new to resin crafts..
Sturdy Resin Molds Silicone Kit: LET'S RESIN resin silicone molds are made by premium quality silicone material with excellent elasticity, superior high tear strength, and a glossy interior surface.
Jewelry Molds for Resin Casting – LET'S RESIN jewelry resin molds are compatible with many casting materials, especially good for epoxy resin, casting resin,uv resin,polymer clay not for coating resin.You just need to twist the silicone molds and release your creation out of the silicone resin molds after the resin is completely cured..
Resin Molds for Jewelry: Add some resin pigment, resin dye, and embed different kinds of embellishments or fillers, DIY your unique resin jewelry with our resin pendant molds for your friends and family..
100% Satisfaction Guarantee: Don't hesitate to share your finished products with us to inspire other customers. If our resin jewelry molds have any issue, please feel free to contact us at any time. LET'S RESIN strives to offer you 100% satisfaction..

Check Stock