ReviewsDrywall Panel Carrier Lift

Drywall Lift Panel Hoist, 16 Ft (Max Height) Sheetrock Jack Lifter for Ceiling, Rolling Caster Wheels, Lockable Construction Tools, Yellow

Maximum Support 150 Pounds: Our drywall lift supports the maximum load of 150 lbs. During the operation, we should pay attention to the weight of the lifted object, and remember not to exceed the maximum load to avoid accidents..
Built-In Winch With Brake: Lifter is easy to assemble and disassemble. The lock device and built-in winch brake are included for increased safety and sturdiness..
Adjustable Telescopic Arm: Telescopic arm can be adjusted from 49' to 114', ideal for installing 4' x 16' sheets..
Tool free assembly: Easy assemble, no tool required. Quick tool-free setup and disassembly for storage..
One Person Working: This drywall lift is perfect for DIY and residential use. The Drywall Panel Hoist allows one person working alone to install drywall walls and ceilings. The Panel Hoist easy to position and tweak to get them exactly where you needed them..

Check Stock

Voohek YC113 Drywall Lift Panel Hoist, 11 Ft (Max Height) Sheetrock Jack Lifter for Ceiling, Rolling Caster Wheels, Lockable Construction Tools, 11', Black

150 Pounds Load Capacity: This drywall lift supports the maximum load of 150 lbs. During the operation, we should pay attention to the weight of the lifted object, and remember not to exceed the maximum load to avoid accidents..
Built-In Winch With Brake: Lifter is easy to assemble and disassemble. The lock device and built-in winch brake are included for increased safety and sturdiness..
Adjustable Telescopic Arm: Telescopic arm can be adjusted from 49' to 114', ideal for installing 4' x 18' sheets..
Easy Assemble: No tool required. Quick tool-free setup and disassembly for storage..
One Person Working: This drywall lift is perfect for DIY and residential use. The Drywall Panel Hoist allows one person working alone to install drywall walls and ceilings. The Panel Hoist easy to position and tweak to get them exactly where you needed them..

Check Stock

Voohek YC113 Drywall Lift Panel Hoist, 11 Ft (Max Height) Sheetrock Jack Lifter for Ceiling, Rolling Caster Wheels, Lockable Construction Tools, 11', Yellow

150 Pounds Load Capacity: This drywall lift supports the maximum load of 150 lbs. During the operation, we should pay attention to the weight of the lifted object, and remember not to exceed the maximum load to avoid accidents..
Built-In Winch With Brake: Lifter is easy to assemble and disassemble. The lock device and built-in winch brake are included for increased safety and sturdiness..
Adjustable Telescopic Arm: Telescopic arm can be adjusted from 49' to 114', ideal for installing 4' x 17' sheets..
Easy Assemble: No tool required. Quick tool-free setup and disassembly for storage..
One Person Working: This drywall lift is perfect for DIY and residential use. The Drywall Panel Hoist allows one person working alone to install drywall walls and ceilings. The Panel Hoist easy to position and tweak to get them exactly where you needed them..

Check Stock

Stark Professional Series 16 ft Drywall Rolling Lift Panel Hoist Jack Caster Construction Dry Wall Lifting w/Caster Wheel Yellow

Allows One Person Working Alone - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install....
Large Cradle - Extends to 10' in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel....
Contractor Grade - Crafted from extra-duty, all-welded steel, this drywall lift can hoist panels up to 4' x 16' in size, with a maximum load of 150....
Versatile Function - Features a 16' reach for flat ceilings and over 19' reach on walls/angled ceilings.
Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage.

Check Stock

Skelang Drywall Carrier, Lift and Carry Panel Mover, ABS Plastic Panel Carrier Tool, Drywall Carrying Handle with 176lbs Load Bearing, Great for Plywood, Glass Board, Plasterboard

MATERIAL: The drywall carrier is made of ABS plastic, the handle covered with TPR rubber, which has anti-slipping function.
SIZE: 6.5 inches×14.6 inches (L×W), the width of handle part is 5.1 inches.
GREAT LABOR SAVER: This is a simple and inexpensive but clever device that makes carrying a full sheet of plywood, drywall, hardboard by one people easily. With this panel carrier, you will have longer hands, because it grabs the bottom with the tool and you hold the tool at a higher level giving the ability to stabilize and carry the board.
DESIGN FEATURES: The solid ABS plastic and the curve gives you better grip and leverage than if it were a straight piece of plastic, the TPR soft rubber handle conforms to the ergonomic and gives your hands and arms needed help without breaking the edges.
PERFECT FOR: Carrying sheets of plywood, drywall, panels, glass board, plaster board and so on, or just removing or installing the doors on your Jeep.

Check Stock

Drywall Tools Carrier, Plywood Panel Plasterboard Glass Board Handle Carry Load Lifter

ABS engineering plastic, anti-decoupling design to prevent goods falling down, ensure safe operation, TRA non-sliding material handle..
Excellent way to carry drywall, plywood, or solar panels,Reduces back strain, improves safety, and speeds up walking with a panel..
Size: 14.4" L ×6.5" W,Handle width 5.1" ，Base Plate width 2.6"..
The Thickened & Multi-frame Base Plate, With Great Load Bearing Approx 176 lbs..
Just hook the panel lifter around the bottom of the sheet at the center point, tip the sheet up and lift, leaving your lifting arm fully extended as if you were carrying a suitcase,Use your other arm to balance the sheet, keeping the drywall close to horizontal..

Check Stock

PanelLift Hangpro Drywall Lift for Walls Model 150

Great for any panel shaped material including drywall, OSB, plywood, insulation, cement board, siding, etc..

Check Stock

Gator Lift Plywood and Sheetrock Panel Carrier 0 to 1 1/8 Grip Range 2 Pack

HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of....
GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person....
SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from....
EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and....
SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety....

Check Stock

PanelHook 19-28 inch Adjustable Panel Carrier (Yellow)

Adjustable Length Drywall Carrier, Low Center of Gravity, Gripping, Easy Storage.
Flexible Strap and Large Heavy Duty Rubber Grip Handle.
Compact for Storage and Transport, May Fit In Your Pocket.
Stable, can be Placed on the Ground to Receive Panels.
Counter Balancing Platform that Pivots to "Grip the Panel".

Check Stock

CARTLIFE Plywood and Drywall Panel Carrier Tool,Sheetrock Gripper,Heavy Duty Metal Gripper for Clamp Wood Board or Drywall Lifter with Single Hand (No Back Pain)

...ol can hold up to two panels or sheets simultaneously.Simple design that allows the clamp to grip a variety of different kinds of panels and sheet goods. When you start lifting, the clamp automatically adjusts the width depend on the thickness of the panel or sheet..
✅【Easy on your back】 Traditionally carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift..
✅【Only one-hand carrying】Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift..
✅【Heavy Duty Holder】Carrying all kinds of plywood, panels, sheets, and slabs, carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper 0-1”.
✅【Innovative Tool Design】Heavy-duty solid metal construction. The clamp and the handle arm are made in aluminum. The handle is made of impact-resistant ABS polymer. This high-quality construction ensures that the tool can ....

Check Stock

Enpoint Drywall Foot Lift, Alloy Foot Panel Lifter for Drywall Install, Door Lifter Tool for Hinge Installation, Plywood Lifting Tool for Sheetrock Glass Ceramic Tile Plasterboard Plates, Silver

Labor-Saving Design --- Ergonomic one-foot lever lift, easily & effortlessly lifting drywall, plywood, panels, fiberboard, sheetrock etc. Also can be door lifter tool..
Anti-slip & Anti-off --- Anti-slip with grip surface & big foot buckle, anti-off with the front edge to limit and balance the panel to prevent slippage/ off hook..
Reinforced Base --- An widened base with enhanced design to make the drywall lift distribute force even and strengthen bearing supports.
Alloy Material --- Sturdy aluminum alloy with welded reinforcement for strength and durability for long service span..
Perfect Size --- Handy and lightweight but heavy duty, easy to transport and store in tool pouch/box..

Check Stock