ReviewsDual Exhaust Tips

AUTOSAVER88 3 Inch Dual Exhaust Tip, 3' Inlet 3' Outlet 9.5' Overall Length Chrome Polished Stainless Steel Double Layer Staggered Diesel Exhaust Tail Tip for 3.0' Outside Diameter Tailpipe, Weld On

  • universal fits 3″ outside diameter of trucks car exhaust tailpipe (Note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Yonaka 2.5" Polished Stainless Steel Muffler Exhaust Compatible/Replacement for 2006-2015 Mazda MX-5 Miata

  • Clean, deep hum, without the irritating mid range raspy sound.
  • Direct bolt on fit to OEM, all installation hardware included.
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5' Inlet 3' Outlet 9.2' Length Chrome Polished Stainless Steel Double Layer Staggered Exhaust Tip for 2.5' OD Tailpipe, Slant Angle Cut, Weld On, Universal

  • universal fits 2.5″ outside diameter of trucks car exhaust tailpipe (Notice: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: Built from high-strength stainless steel, our chrome exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: The thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Dual Exhaust Tips Automotive Replacement Exhaust Muffler Tip ID 2.36'' Inlet 3' Outlet Stainless Steel Black Exhaust Tip Universal Fit for 1.5-2.25'' Exhaust pipe

  • [DUAL EXHAUST TIP]—— Automotive Replacement Exhaust Pipes With dual exhaust tip can increase exhaust pressure and reduce exhaust noise effectively..
  • [EXCELLENT APPEARANCE]—— The exquisite exhaust tail throat with stylish design and bright color, make your car shiny and cool..
  • [APPLICANTION]—— The Y exhaust pipe Universal fits for car with 1.0-2.0 engine, please check the size before..
  • [EASY INSTALLATION]—— Easy to install in minutes, no need for drilling or welding..
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

Rough Country Dual Exhaust (fits) 2007-2018 Jeep Wrangler JK | Axle Back | Stainless Steel | Matte Black | 96002

  • Corrosion Resistant 409 Stainless Steel construction in Matte Black.
  • Chambered muffler offers throaty and aggressive sound with a 2. 5" high-flow design.
  • 4" 304 stainless dual wall exhaust tips with RC Logo.
  • Easy at Home Installation and Support Provided by RC..
Check Stock

Exhaust Stamped Y-Pipe 3 Diameter Single Inlet to 3 Diameter Dual Outlets 8 Width 13 Length Stainless Steel Tailpipe

  • Size: 3"single Inlet,3"dual outlets, 8" width,13" length.
  • High quality: It will function well exactly as same as the original one.
  • Type: Y Pipe to create dual exhausts to help exhaust faster and better tone reduces interior resonance compact,designed for increasing horsepower,....
  • Material:High quality polished stamped 409 stainless steel with very strong anti-corrosive,protect original tips from Sun and Rain,avoid rusting and....
  • Fitment: Universal fit most vehicles with 3" diameter Inlet size for car truck pickup,please measure your pipe diameter before purchasing,thanks.
Check Stock

Big Gun Exhaust End Cap (EVO Turndown Tip) (Red)

  • This Billet exhaust tip on the market with its 15 degree angled outlet and machined gunbarrel divots at the tip..
  • This Billet exhaust tip fits on the end of your OEM exhaust system increasing your rides overall performance and sound..
  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

idain 2.5 inch Inlet Dual Exhaust Tip Stainless Steel Polished Muffler Tail Universal Bolt-On Double Outlet Tail Pipe (Black,Curved)

  • Durable Material:Design with durable stainless steel,strong corrosion resistance,high temperature resistance,during and waterproof.
  • Dual Exhaust Tip:With dual exhaust tip, it can increase exhaust pressure and reduce exhaust noise effectively.
  • Excellent Appearance:Exquisite tail throat with stylish design and bright color, replace the traditional exhaust tip to make your car shiny and cool.
  • Universal Fit:Wipe application for 63mm/2.5 inch Inlet trucks pickup car exhaust system.
  • Easy Installation:No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock