ReviewsDual Extruder Nozzle

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock

TENLOG Hands 2 Pro Independent Dual Extruder 3D Printer,300 Degree high Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS 8.6 x8.6 x9.8

  • 【Independent Dual Extruder Design】Our Hands 2 Pro Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to....
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the....
  • 【Self-developed Silent Motherboard 】The Hands 2 Pro built-in self-developed silent motherboard tmc2208 driver, which has stronger....
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

JG AURORA Artist-D IDEX 3D Printer Dual Independent Extruder Quick Nozzle Replacement Direct Feed Filament Linear Rail Easy Assemble Support PLA TPU PETG Print Size 11.81 x11.81 x13.38

  • ★Large Build Volume★ large single models up to 300mm x 300mm x 340mm, or by utilizing its 'double' or 'mirror' modes, print two of the same model....
  • ★Quick Nozzle Replacement★ Featuring an Extruder module with an innovative one-button 'Nozzle Eject' system, Artist-D allows you to easily swap....
  • ★Dual Z-axis Design★ Two Z-axis screws and stepper motors drive the vertical axis of the Artist D that will improve accuracy and precision,....
  • ★Direct Drive Extruder★ Less torque from the motor is required to push the filament. It is capable of handling a variety of materials including....
  • ★Easy to Assemble★ The Artist-D requires no special skills to assemble, only 3 steps to assemble, whether you are a 3D printing enthusiast or a....
Check Stock

FLASHFORGE Dreamer 3D Printer Dual Heads Extruder Direct Drive Fully Enclosed Machine Copy/Mirror Dual Color Print Aerospace-Grade Aluminum Plate 230*150*140 mm

  • Flashforge Dreamer sports a dual direct drive extruder setup with a nozzle diameter of 0.4 mm capable of layer resolutions ranging from 100 to 500....
  • The Flashforge Dreamer is versatile when it comes to materials with support for PLA, ABS, limonene-dissolvable support material, nylon, HIPS, Flex,....
  • A dual fan setup is fitted to the back panel that works in unison with the triple extruder fans to cool PLA by extracting the warm air. Equally, the....
  • The Dreamer has both an SD card reader slot and a USB-to-PC port, in addition to Wi-Fi connectivity for untethered use. The USB feature is uncommon in....
  • A 3.5-inch full-color HD IPS touchscreen is integrated into the front panel of the Dreamer. We found it particularly responsive and easy to navigate.....
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • 300°C HIGH-TEMP PRINTING: Creality new 3D printer Ender-3 S1 Pro Print excellently with diverse filaments, such as PLA, ABS, WOOD, TPU, PETG, PA, etc..
  • “SPRITE” FULL-METAL DUAL-GEAR DIRECT EXTRUDER: the new upgraded direct extruder of the Creality 3D Printer Ender-3 S1 Pro comes with the pushing force up to 80N, the extruder realises smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
  • HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

HICTOP Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10 CR-10S CR-10 S4 and CR-10 S5 Dual Gear Extruder

  • 1.Dual gear extrusion mechanism, high extrusion force, ensure smooth feeding, you need to change the extruder e-steps from 100 to 140.
  • 2.Perfect upgrade replacement for Creality 3D Printers CR-10, CR-10S, CR-10S Pro, Ender-3, Ender 3 pro, Ender 5 ,Tornado etc. stable and durable..
  • 3.All-metal extruder aluminium alloy, DIY aluminium block, self-assembly.
  • 4.Update on 2021/04/26: The too long spring has been changed to the right size.
  • 5.Better pressure pushes the filament into the printer nozzle.
Check Stock