ReviewsDual Extruder Nozzle Kit

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....

Check Stock

Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables

Upgraded Kit - Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament..
Smooth Feed-in - The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament..
Greater Compatibility - Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments..
Strong & Sturdy - This direct extruder kit is all metal structure, durable and wear resistant..
Easy Assemble - Longer connecting cable, tools, accessories and diagram instruction, easy to assemble..

Check Stock

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
NTC connector with terminal, easy to intall.
Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....

Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
an Integrated structure is convenient for wiring and replacing..
3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.

Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

...0℃ High-temp Nozzle: This creality 3d printer comes with upgraded brass nozzle which can stand 300℃ high-temp, allow you to choose more kinds of filament like ABS, PETG, PA, PLA, TPU and Wood. Not only for more possibilities of creation but also gives you a smoother printing..
“Sprite” All Metal Direct Drive Extruder: The new upgraded direct extruder comes with the pushing force up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise..
Higher Printing Precision & Easy to use: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps..
Upgraded in All aspects: New 4.3 inch color touch screen installed and it takes an user frien....

Check Stock

Entina X40 IDEX 3D Printer, Independent Dual Extruder 3D Printer with TMC2208 Silent Driver, 4.3' Touch Screen, PEI Spring Steel Magnetic Platform, Built-in Camera, Wi-Fi Cloud Printing 300x300x400mm

【Independent Dual Extruder 3D Printer】The X40 idex 3d printer is designed with independent dual extruders that supports 4 printing modes: single nozzle printing.
duplication mode printing and mirror mode printing. You can print two different types materials and colors model, or print two same models at the same time..
【Large Build Volume】Ultra-large forming volume allows you to print single model up to 11.8"(L) x 11.8"(W) x 15.7"(H) / 300 x 300 x 400mm, which provide enough space for your 3d printing creation, give you greater freedom to print. The large 3d printer with dual extruder can use PLA, ABS, TPU, PVA, PETG, HIS, Nylon, Wood, and Metal..
【Auto Leveling & Super Silent】X40 dual extruder 3d printer equipped with intelligent leveling system, which can automatically compensate for the printing height of different points of the hotbed, friendly use for both expert-level and beginners. 32 Bit motherboard with TMC2208 silent driver provides a quieter printing at less than 50db noise level..
【Build-in Camera & Wi-Fi Printing】Our big 3d printers X40 equipped with Wi-Fi chip and built-in camera that helps to keep an eye on prints in case of incorrect settings, and helps to pause or abort printing via Wi....

Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
Features: The mould steel spring is very rigid, strong in pressure and very durable..
Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..

Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

...igh temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams, which effectively overcomes the short-stroke print head's heavier s....

Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).

Check Stock

HICTOP CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality 3D Printer CR-10 CR-10 mini CR-10S 3D Printer Replacement Parts

Easy for the CR-10 hotend to Assemble: Packed whole extruder kit, just fix it on X axis and connect to control box, it will work..
2 Durable Quality: plug and play cr-10 hotend assembly with high quality..
3 Fit for: Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers.
4 Stable Material: Aluminum, stainless steel, brass and MK8 nozzle.
5 Extruder kit : cr-10 hotend with thermistor, heater carriage, and two cooling fans..

Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....

Check Stock