ReviewsDual Port Valve

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
  • FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Check Stock

Wadoy Central Pneumatic Air Compressor Pressure Switch Control Valve Replacement for Parts 90-120 PSI 240V

  • H/D PRESSURE SWITCH AIR COMPRESSOR 145-175 4 PORT 26 AMP w/ Gauge & Pop off valve 0-200 PSI Pressure Gauge 200 PSI Pop off valve.
  • efoo AIR COMPRESSOR CONTROL VALVE LF10A-H4,Four port, 145-175 PSI 26 AMP AMP RATING: 26 AMPS SINGLE PHASE OR THREE PHASE, 110/230.
  • Air Compressor Pressure Switches · For all global air compressor applications. · LF 10A Four Port Series (LF10A-L4) · UL Listed and CSA Certified. · DPST switch · Rated 26 Amps · Temp. range: -22° to 257°F.
  • Pressure Switch, Air Compressor, Standard Action, Factory On/Off Set 145-175 PSI, Pressure Range 35 to 150 PSI, Burst Pressure 500 PSI, Port Type 4-Port 1/4 In NPT (Female), 1/4" Compression Unloader, Diaphragm Actuation Type, Manual Switch Action Auto/ Off, Single Phase, DPST Contact Type, 26 Amps, NEMA 1 Enclosure, Temp Range -22 to 257 F, Standards UL/CSA.
Check Stock

2510 Posi-Temp Pressure Balancing Valve Compatible with Moen Shower Valve Brass Tub and Shower Valve 1/2 Inch IPS Connections with 1222 Faucet Cartridge & Retainer Clip

  • 【High Flexibility】: The 2510 brass posi-temp pressure balancing tub and shower valve is compatible with Moen M-PACT common valve system. You can....
  • 【Temperature Control】: The 2510 shower valve helps maintain water temperature control in the shower/tub. It is designed to rotate counter....
  • 【4-Port Valve】: The 2510 posi-temp valve is a 4 port valve. It has a cold water inlet, a hot water inlet, a shower outlet and a tub outlet. If you....
  • 【Connection Size】: The 2510 positemp shower valve compatible with Moen shower valve is built with 1/2-inch IPS connections..
  • 【Intimate Service】We provide 5 year worry-free warranty and friendly customer service for the 2510 shower valve kit. Feel free to contact us if....
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

ATIE Neverlube Diverter Valve Kit 4720 Replacement for Jandy 2 Port or 3 Port Never Lube Diverter Valve 4720

  • Fits Jandy NeverLube 2 & 3 Port Valves and Jandy Gray 2 & 3 Port Valves.
  • Kit included: 1 Diverter Valve, 2 Shaft O-Rings, 1 Cap O-Ring, 1 Knob (black).
  • Aftermarket Replacement For Jandy 4720 Divert Valve Repair Kit.
  • Fit the Jandy Never lube & Standard Valves.
  • Does not fit Jandy large Diverter valve 4718, 4719.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

Patioer R134A Refrigerant Charging Hose Gauge, Refrigerant Recharge Hose Kit with 3 Pack BPV-31 Bullet Piercing Tap Valve Kit for Car AC Air Conditioning Refrigerant Charging Can to R-12/R-22 Port

  • PACKAGE INCLUDES 5 PACKS: 3 x BPV-31 bullet piercing tap valve kits, each one contains 1 piercing valve, 1 hex key and 2 adapters.
  • 1x R134A U-charge hose with gauge and can tap.
  • PREMIUM MATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use..
  • R134A CHARGING HOSE: 15.3inch/39cm long, with R-134a can connect R-12 / R-22 service port, 1/2" end port fits for R12, R22, R502 fittings. And the gauge has scale readings for R134, R12, and R22. 90-degree push and lock coupler can auto shut off..
  • EASY TO INSTALL: BPV-31 bullet piercing tap valve kits are equipped with hexagonal wrench of suitable size, which is more convenient to install. Use the retrofit valve to attach the gauge with bullet piercing tap valve..
  • UNIVERSAL RETROFIT VALVE:  Retrofit valve converts from R-12 to R-134a. Fit for 7/16 inch low side port.
  • Suit for vehicles pre-1994, comes with R-134a refill fittings. Replace AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
Check Stock

Frienda AC R134A R1234YF Valve Core Tool, 35 Pieces Air Condition Valve Core A/C R12 R134a R1234YF Refrigeration Schrader Valve Core, 3 Pieces Remover Tool with 20 Pieces O-Ring Rubber Seal for Car

  • What you will get: the package comes with automotive AC valve core remover and installer tool set, including 3 pieces valve core remover tool, 10 pieces R134a refrigeration schrader valve cores, 20 pieces R12 refrigeration schrader valve cores, 5 pieces R1234YF refrigeration schrader valve cores, 20 pieces O-ring rubber seals, complete accessories to meet your daily disassembly and assembly needs.
  • Widely applicable: the automotive AC valve core remover and installer tool set is compatible with R134A and R1234YF automotive air conditioning systems, and is compatible with standard, JRA and Schrader valves.
  • Quality valve air conditioning valve core are compatible with R12/ R134A/ R1234YF automotive and household air-conditioning accessories.
  • Please check if the model is what you need.
  • Quality construction: the valve core remover and installer tool kit is made of solid and sturdy metal materials, reliable and durable.
  • The parts are oil-resistant, impact-resistant, corrosion-resistant, water-proof, not easy to chip and break, which support a long time application.
  • Easy to store and use: the valve core remover and installer tool kit comes with a box, which is easy to store, and is simple to operate.
  • The connector without text mark is suitable for the connecto....
Check Stock

AOMAG® 1/8\ NPT DC 12V Electric Solenoid Valve 2 Way Water Air Valve Normally Closed

  • 【Service Media】: Air, Gas, Liquid, Water 【Material】Anodized Aluminum.
  • 【Valve Type】2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
  • 【Port Coil Voltage】 12V Port size: 1/8" Female..
  • 【Temperature Range】 23-176°F , Pressure Range : 115 PSI.
  • 【Feature】This solenoid valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
Check Stock

ATIE Neverlube Diverter Valve Kit 4720 Replacement for Zodiac Jandy 2 Port or 3 Port Never Lube Diverter Valve 4720 (3 Pack)

  • Fits Jandy NeverLube 2 & 3 Port Valves and Jandy Gray 2 & 3 Port Valves.
  • Kit included: 3 Diverter Valve, 6 Shaft O-Rings, 3 Cap O-Ring, 3 Knob (black).
  • Replace Zodiac Jandy 4720 Divert Valve Repair Kit.
  • Fit the Jandy Never lube & Standard Valves.
  • Does not fit Jandy large Diverter valve 4718, 4719.
Check Stock

Doheny's Small Pool Sand Filter System

  • DOHENY's SMALL POOL SAND FILTER SYSTEM Is The Perfect Solution For Small Above Ground & Quick Set Pools!.
  • Multi-Port Valve Includes Positions For Filtration, Backwash, Rinse & Winter. Includes Pressure Gauge, Sand Tank Drain Plug For Winterizing and Easy-To-Use Ring Lock Valve Connector.
  • 42 lb. Sand Capacity. All Fittings Threaded 1 1/2"..
  • Comes Complete Sand Filter, 1,200 GPH Pump, Multi-Port Control Valve & Base.
Check Stock