USB Logic Analyzer Device with USB Cable 5MHz 24MHz 8CH 8 Channel UART IIC SPI Debug Logic Analyzer Professional Microcontroller Device Network Analyzing Set for Ardu-ino FPGA ARM M100 SCM
- Logic analyzer is a waveform test device similar to an oscilloscope. It collects specified signals and displays them to developers through graphics or data statistics. Developers use these graphical timing signals to analyze hardware or software errors in accordance with the protocol..
- Logic analyzer is an indispensable device in design. It can quickly locate errors, find and solve problems, especially when analyzing timing, such as 1wire, I2C, UART, SPI, CAN and other data, the application of logic analyzer to solve problems is very fast..
- Plug the DuPont cables into the logic analyzer interface one by one. After the DuPont cables are inserted, they will be divided into 2 rows. The upper row of 5 logic analyzers corresponds to the silk screen on the left side of the shell, and the bottom one row corresponds to the silk screen on the right. Before testing the signal, please connect the GND channel of the logic analyzer to the GND pin of the board, otherwise the measured data will be unreliable..
- If the logic analyzer works at 24M, the USB device must not only provide a 24M communication rate, but also must ensure that other devices occupy USB resources before the 4 buffers are filled. For these reasons, the logic analyzer cannot always work at the sampl....