ReviewsDual voltage Generator

wonofa Water Flow Generator Turbine Generator Hydroelectric Micro Hydro Generator 1/2 Inch Portable Water Charger 10W 12V

  • Micro hydro generator, the potential energy conversion of the water into electrical energy mechanical equipment.
  • High UV and water resistance for a long life,the life of generator:more than 3000h.
  • Appearance: generator surface cleaning, no corrosion, the structure is strong.
  • Output characteristics: the output voltage with no voltage regulator is proportional to the water pressure.
Check Stock

UNI-T UTD2102CEX+ High-Precision 100MHz Desktop Digital Storage Oscilloscope for Laboratory and Electronic Repair Waveform Tester

  • UNI-T Function Arbitrary Waveform Generator UTG962. Dual channels. Ch1 - Ch2 combining. Output waveform: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Frequency counter with output range: 1μHz-60MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • One of the best ready-to-use function generators. Value pack includes: UTG962 function generator, power adapter (USA standard), USB cable power cord, BNC cable, BNC cable with alligator clips, paper manual, eManual, and 24/7 free support by UNI-T Direct..
  • Budget friendly and intuitive generator for hobbyists, novices, students, small labs, basic projects, ham radio alignment, pro audio measurements. Learn and update skills, work with audio gear, DC offsets, wow & flutter test, amplitudes, receiver test, circuit test, filter troubleshooting, refurbish turntable..
  • As a global brand, UNI-T supply all kinds of testing meters and instruments i.e. oscilloscope, electromagnetic pulse generator, rife machine, tone gen....
Check Stock

PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case

  • PARAMETER — working voltage DC 3.3-30V.
  • DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
  • APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
  • for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
  • PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
  • EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Check Stock

Xantrex Freedom SW3012 12V 3000W Inverter/Charger [815-3012]

  • ...eedom SW Inverter/Charger, Powerful, Configurable, Versatile.
  • The Freedom SW series represents highly sophisticated and advanced inverter/chargers.
  • Also features improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost.
  • Connected loads are almost unable to feel the power transition due to this quick transfer time.
  • Approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
Check Stock

RICH SOLAR 6500 Watt (6.5kW) 48 Volt Off-Grid Hybrid Solar Inverter

  • Status indication with RGB lights. Built-in Wi-Fi for mobile monitoring (Android/iOS App is available). Supports USB On-the-Go function.
  • Reserved communication port for BMS (RS485, CAN-BUS or RS232). Replaceable fan design for ease of maintenance. Battery independent design.
  • Configurable AC/PV output usage timer and prioritization. Selectable high power charging current. Selectable input voltage range for home appliances and personal computers.
  • Compatible to Utility Mains or generator input. Built-in anti-dust kit. Optional DC output for DC fan, LED bulb, router and so on..
  • Parallel operation with 6 units. Dual outputs selected as either programmable output or generator input. Net Weight: 40.6 lb. Dimension(D X W X H): 5.8 x 17.0 x 21.8 in.
Check Stock

Revlon Salon 360 Surround Hair Dryer and Styler

  • 3 in 1 Tools for Fast, Frizz Free Results.
  • Ionic Technology with Ion Generator On/Off Button.
  • 3 Piece Styling Attachments Included for Detangling, Smoothing & Styling Control.
Check Stock

Roland SE-02 Boutique Designer Series Analog Synthesizer

  • Discrete analog circuitry with knob-per-function interface.
  • Three voltage controlled oscillators with six waveforms.
  • Temperature-stabilized oscillators with automatic tuning.
  • 24 dB low-pass filter and dual gain-stage amplifier.
  • Three types of cross modulation (XMOD), feedback loop, and noise generator.
Check Stock

CROC IPulse Flat Iron Black

  • Negative ion generator produces 1 to 2 million streams of ions.
  • The ventilation system releases excess high heat, preventing internal and physical damage.
  • ‌fully digital temperature settings [280f° – 450f°].
  • ‌dual voltage capabilities [110v – 240v]..
Check Stock

UNI-T UTG962 Function Generator Arbitrary Waveform Generator Kit Frequency Generator RF Signal Generator 60MHz 2 Channel 200MSa/s 14 Bits Dual-Channel

  • UNI-T Function Arbitrary Waveform Generator UTG962. Dual channels. Ch1 - Ch2 combining. Output waveform: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Frequency counter with output range: 1μHz-60MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • One of the best ready-to-use function generators. Value pack includes: UTG962 function generator, power adapter (USA standard), USB cable power cord, BNC cable, BNC cable with alligator clips, paper manual, eManual, and 24/7 free support by UNI-T Direct..
  • Budget friendly and intuitive generator for hobbyists, novices, students, small labs, basic projects, ham radio alignment, pro audio measurements. Learn and update skills, work with audio gear, DC offsets, wow & flutter test, amplitudes, receiver test, circuit test, filter troubleshooting, refurbish turntable..
  • As a global brand, UNI-T supply all kinds of testing meters and instruments i.e. oscilloscope, electromagnetic pulse generator, rife machine, tone gen....
Check Stock

5KW 6KW AVR Automatic Voltage Regulator Rectifier for Gasoline Generator W/Carbon Brush Honda GX390

  • Stop fluctuation of voltage, automatically maintaining generator output terminal voltage at a set value.
  • Prevent generator from suffering damages of voltage fluctuation or over load..
  • It uses an electromechanical mechanism, or passive or active electronic components..
  • According to the design, which is used to manage one or more AC or DC voltage..
  • In addition to the shunt regulator, the regulator operates through a number of fixed internal comparison of the actual output voltage of the reference voltage..
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock