ReviewsDuplicator Controllers

Copystars DVD-duplicator External burner drive 1-1 CD DVD copier Duplicator Tower

  • DVD duplicator equipped with latest DVD reader drive and 24x dual layer burner driver.
  • Duplicator controller with 64 MB DDR2 fast memory, auto start easy operation.
  • DVD duplicator do not copy store bought disc, such as movie, music or games.
Check Stock

ACASIS NVMe M.2 Duplicator Dual-Bay Offline Clone USB C to NVME Docking Station for M2 SSD M Key Hard Drives Enclosure [Support 8TB]

  • [ACASIS NVMe M.2 Duplicator] It functions greatly as an Offline NVMe M.2 Duplicator to clone important data between 2 SSDs quickly without a computer, and can be used as a Dual-Bay NVMe Docking Station to help expand storage capacity with an SSD or two..
  • [Easy M2 SSD Offline Cloner ] An easy clone, without the burden of having go use a computer to do so. Just plug the two M2.NVME SSDs in and hooked up the power,click the ‘Clone’ button for 3-5 seconds to quickly clone all files from ‘A’ SSD to ‘B’ SSD, there are LED status indicators and the process completed quickly. NOTES: make sure the capacity of target M.2 NVME ssd larger than original M.2 NVME ssd..
  • [High Speed and Performance] This dual-bay nvme duplicator drive enclosure enables 10Gbps super speed data transfer, with 992Mb/s write/read speeds for most M2.NVME SSDs. It took about 4 minutes to clone a 256GB m.2 SSD to a 2TB one as tested.Support an SSD with capacity up to 8TB..
  • [Friendly Humanized Design] ACASIS versatile M.2 NVMe duplicator support Smooth plug and unplug. No need to use any tools or screws. Adopted Aluminum alloy material design, can quickly dissipate heat and protects the hard disk when in use..
  • [Before Perchase] 1,ACASIS NVMe duplicator support two M.2 nvme ssds....
Check Stock

Acumen Disc EZ Dupe 1 to 1 SATA 3.5\ & 2.5\ Hard Drive Duplicator - Compact Single HDD Clone & SSD Storage Card Copier (up to 150 MB/s) & Data Eraser (DOD Compliant)

  • DVD duplicator tower is fully stand-alone(no PC required), no software is needed.
  • DVD burner drives are all SATA type, top brand, heavy duty DVD duplicator grade only.
  • Disc duplication tower is masterminded by Copystars smart cd/DVD duplicator controller.
  • UL and TUV certified duplicator power supply ensure high standard of safety and reliability.
  • Backed by Copystars 3 years labor and 1 year parts warranty.
Check Stock

GreatNeck 74591 10 Inch Contour Gauge, 10 Inch Contour, Contour Duplication Gauge with Lock, Easy Contour Device Forms to Most Shapes, Adjust Tightness

  • Professional Gauge: The contour gauge profile tool easily duplicates shapes for transfer to tile, wood, and other surfaces.
  • Copies curved, angled, complex, and irregular shapes.
  • Variety of Uses: This contour gauge duplicator is useful for woodworking projects.
  • Ideal as construction tools, carpenter tools, contractor tools, and flooring tools.
  • Easy To Use: The super gauge shape and outline tool forms to nearly any shape for easy body contour tracing.
  • Shape contour gauge duplicator measures centimeters and inches.
  • Adjustable and Lockable: The 10 inch contour gauge duplicator tool locks securely for accurate body tracing.
  • Adjust the tightness with the included Allen wrench.
  • Heavy Duty Contour Tool: This contour marking gauge is made of high-quality ABS plastic and metal for strength and durability.
  • Shape gauge contour duplicator resists rust.
Check Stock

Copystar DVD Duplicator Sata 1 to 7 24X DVD-Burner Drive CD DVD Duplicator Writer Copier Tower

  • DVD duplicator fully standalone, No PC required.
  • DVD burner drive perform maximum speed 24x DVD, 52X CD.
  • Duplicator controller capable to Copy,compare,track edit,CD over burn,CD Text.
  • 3 years warranty for labor, 1 year for parts.
  • Sturday duplicator case and power unit FCC/UL/TUV/CE/Rohs certified 110v/230v switchable.
Check Stock

Copystars Duplicator-case for build Blu-ray-CD-dvd-duplicator tower + power supply (3 Bay)

  • Duplicator case with professional designed for building of heavy duty Blu ray/CD/DVD duplicator tower.
  • Sturdy structure for heavy duty duplicator.
  • UL,TUV,CSA certified power supply,UL power cord.
  • 3 SATA, 1 fdd and 1 molex connections, room for internal hard drive,one SCSI cutout on black panel.
  • One year warranty from copy stars, case and power supply only, no burner inside.
Check Stock

4-Key High Accuracy Remote Controller Copy/Clear Code Wireless Cloning Remote Control duplicator for car car sunroofs Garage Doors gate Doors Remote Control duplicator

  • 【Copyable Chip】Fixed code and learning code remote control: PT2240, PT2260, PT2262, EV1527, FP527, AX5326, PT2242, HT600, HT680, HT6207, HT6010,....
  • 【Wide Application】Wireless remote control duplicator, duplicate your existing remote controllers for car, car sunroofs, garage doors, gate doors,....
  • 【Clear Code】Press and hold the two buttons on the front (top) of the remote control. After the lamp flashes in 3 seconds, release one of the C or....
  • 【Copy Code】Hold the copied remote control in one hand and the copying remote control in the other hand. The two remote controls should be as close....
  • 【Recovery Method】If the useful data is cleared by mistake, you can press the two buttons on the back (below) of the remote control at the same....
Check Stock

PlexCopier AutoDupe Easy to USE STANDALONE 24X 1 to 1 CD DVD Burner Writer Drive Duplicator Tower

  • [Complete Standalone Operation] No PC required to operate the duplicator..
  • [AutoDupe Capabilities] Able to make copies without needing to program any buttons, simplified operation where the duplicator automatically starts the....
  • [Supports Max Write Speed] Up to 24x DVD Write Speed, 52x CD-R Write Speed, with default max caps for selected medias to give optimal burning....
  • [Supports M-Disc DVD Format] Able to record on to 1000 year archival grade M-Disc media.
  • [Won’t Copy Encrypted Discs] The duplicator will not copy any discs that are encrypted with copy protection..
Check Stock

Acumen Disc 1 to 2 Multimedia Backup Duplicator - CF SD MS USB Flash Media Memory Card to DVD CD & Multiple Discs Copier Machine Unit (Standalone Audio Video Copy Tower, Duplication Device)

  • DVD duplicator case chassis for building of heavy duty blue ray/cd/DVD duplicator tower.
  • Saturday case included power supply 115v/230v switchable.
  • Dvd duplicator case with SATA power connection for drives.
  • One cooling fan, room for installation of internal hard drive.
Check Stock

Startech.com Usb3sdockdd Usb 3.0 Laptop Docking Station

  • BROAD DRIVE COMPATIBILITY: Standalone 1-to-1 duplicator and eraser for M.2 PCIe NVMe (M-Key), M.2 SATA AHCI (B+M-Key), SATA 2.5/3.5" drives.
  • Duplicate between M.2 NVMe/SATA & 2.5/3.5" SATA drive interfaces.
  • CONFIGURABLE DUPLICATION MODES: Solid State Drive (SSD)/Hard Disk Drive (HDD) cloner supports multiple modes: System & File, All Partitions, Whole Drive & Percentage Duplication.
  • Adjustable Host Protected Area (HPA) settings to include/exclude partitions.
  • CONFIGURABLE ERASE MODES: Drive wiper w/ 5 erase modes: Quick Erase, Full Erase (Single & 3-Pass), Secure Erase (Clear/Purge, meets NIST SP 800-88 Rev 1).
  • Upgradeable firmware complies with future DOD & Government standards.
  • EASY TO USE: External drive duplicator/sanitizer has intuitive button-operated interface w/ full on-screen display (OSD) for increased manageability.
  • Menu incl: Error Reporting, Present Drive Info.
  • LED indicators (Power/Activity, Status, Error).
  • WIDE COMPATIBILITY: M.2 NVMe duplicator supports M.2 NGFF SSDs sized 2230/2242/2260/2280/22110.
  • M.2 NVMe & M2 SATA drives incl. Samsung 850/860/870/950/960/970, WD, HP, & Intel.
  • Supports IDE/mSATA using SAT2IDEADP/SAT32MSAT25....
Check Stock

YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece..
  • Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor.
Check Stock