ReviewsDurable Carbide Tool

4 Pieces Tungsten Carbide Tip Scriber with Magnet Aluminium Etching Engraving Pen with Clip and Automatic Spring Loaded Center Punch for Glass Jade Ceramics Metal Sheet

  • Enough quantity: there are 2 pieces of tungsten carbide scribers and 2 pieces of automatic center punches in the package, sufficient quantity to meet....
  • Tungsten carbide scriber: the glass scriber consists of a durable tungsten carbide tip and an aluminum shell, which can easily handle many hard....
  • Easy to hold: the tungsten carbide scriber is designed in pen shape with a sturdy structure, light weight, with knurled aluminum handle, non-slip,....
  • Automatic center punch: the 5 inches center punch has an adjustable tension, so you can use it easily with just one hand, and no other tools are....
  • Safety tool: the automatic manual punching tool is made of HSS and applied in wood, metal and other materials.
  • Before punching, accurate marking and....
Check Stock

NEPAK 4 Pack Tungsten Carbide Scriber with Magnet,with Extra 4 Replacement Marking Tip,Etching Engraving Pen for Glass/Ceramics/Metal Sheet

  • ▶Replaceable:4 Pack Tungsten Carbide Tip Scriber with 4 free replacements marking tip..
  • ▶Durable Material: The glass scriber has a durable tungsten carbide tip and an aluminum body, so it can easily handle hard materials including hardened steel, stainless steel, ceramic and glass. Disposable briquetting tungsten carbide blades are more durable than others and are not easy to drop..
  • ▶Magnetic: The permanent magnets on this etching tool pick up small parts and recover steel filings from hard-to-reach places..
  • ▶Comfortable Use: Convenient pen design and convenient pocket clip, knurled aluminum handle provides maximum control and comfort..
  • ▶Easy to Store: When not in use, the tip of tungsten carbide can be reversed..
Check Stock

Norton Abrasives Dressing Tool Stick, Grinding Wheel Tool for maximizing Grinding Wheel Performance

  • Take care of your grinding wheel with this Grinding Wheel Dressing Tool from Norton Abrasives, perfect for cleaning, opening and reshaping grinding wheels.
  • Crafted with a sharp, durable, medium grit silicon carbide abrasive, this dressing tool will deliver efficient truing and dressing of a variety of materials, including masonry, stone, brass, titanium and stainless steels.
  • This versatile dressing tool delivers excellent results when dressing conventional vitrified wheels and during rough finishing-stick work such as removing small burrs.
  • Designed for use with manual sharpeners, this grinding wheel dressing tool has a superior vitrified bond for extended longevity, and it is an ideal choice for opening, reshaping and cleaning grinding wheels to improve performance.
  • Dimensions: 1 x 1 x 6 In, made of Silicon Carbide.
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ... a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
  • The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

Simple Woodturning Tools COMBO: Mid Size Rougher, Turner & Hollower and Detailer Carbide Wood Turning Hand Tool Set with Interchangeable Handle for Wood Lathe (3 Tools w/Brilliant Red handle) USA Made

  • Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • Handle Details: The most beautiful, solid aluminum lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance & durability. Beautifully powdercoated to a brilliant finish to last for years. Overall length is 12".
  • tool opening is 3/8" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
  • Mid Size Tool Details: Premium quality, American-made, CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These mid size carbide tools feature an overall length of 9", with a handle tang of 3/8" diameter x 2" length..
  • Tool Use: The mid size Simple Turner & Hollower is ideal for turning small bowls, handles, bottle stoppers, etc. T....
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood,Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

The Best of Metal Blade, Vol. 2 [Vinyl]

  • EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades..
  • Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting..
  • Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc..
  • The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material..
  • Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market..
Check Stock

HOMEIDOL Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8 Shank 10 PC Double Cut Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【Material】Double cut carbide rotary burr set,tungsten carbide,can be used to process: iron, steel etc.. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 45-50 mm( 1.77-2 inch).1/8” fits dremel tool, straight shank can be held by most rotary tool with three jaw chuck for accurate centering.Please check the size before you buy it..
  • √【Durable】Carbide rotary burr's packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns..
  • √【High efficiency and Practical】The rotary tools processing efficiency is higher than the manual file tool. 10 different types of carving kit drill bits, meet your different needs.No wear out after a long time use. The shaft will not bend at high speed..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control..
  • √【A Good Rotary tool】 A good choice of DIY carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood carving job.It is also an ideal gift for woodcarvers..
Check Stock