ReviewsDurable Rubber Gasket

Pack of 5 Compatible Replacment filter set for GE GXWH04F GXWH20F GXWH20S GXRM10 GX1S01R Compatible Filters, 5 Micron Water Filter Cartridges by IPW Industries Inc.

  • Perfect Replacements: Perfect replacement o-rings / gaskets / seals for GE (TM) 2.5 in water filter housings. Compatible with models GXWH20F, GXWH04F, GXRM10, GXWH20S and GX1S01R - whole home water filtration system.
  • Replace Your Lost Or Loose Gasket: Gaskets get lost periodically and get warped/worn out over time. A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky mess. Always have a spare on hand!.
  • Made From High-quality Rubber: Our gaskets are made from high-quality, durable rubber and are made to last. BPA/Phthalate free. The Gasket is a replacement for GE 2.5 inch water filters and the gasket measures 3 5/16 inch inner diameter - 3 9/16 inch outer diameter.
  • Save Money, Easy To Install: Replacement gaskets for these filters are often hard or expensive to find - don't waste money on expensive replacements! Easy-to-install. 6 gaskets per pack.
Check Stock

Oster OS4900 Blender Part Small Gray

  • Add years to the life of your oster blender.
  • Fits around the base of blender blade plate.
  • Blender gasket fits around the top side of the cutter assembly.
Check Stock

Replacement Parts For Oster Osterizer Blender Blades with 4902 Blender Jar Bottom & 6 Point Fusion Blade 4961 & 2 Pcs O Ring Rubber Seal Gasket Compatible with Oster Osterizer Blender Accessories

  • ★【PREMIUM QUALITY】4inch"/10.4cm diameter, 175g, Food Grade Plastic and High-Srength Stainless Steel, BPA free, 6-Fin Blades For Quick Processing.
  • ★【APPLY TO】FITS NutriBullet 600W and Nutribullet Pro 900 High-Speed Blender/Mixer System, NOT FITS NutriBullet Lean, RX, Magic Bullet or Ninja Blenders.
  • ★【PERFECT SEAL】 Rubber Gasket Pre-installed in Base for Complete Seal with Cup are Safe and Durable, Providing a Good Seal and a Long Service Time.
  • ★【PACKING INCLUDES】1x Extraction Blade(Gray Invisible Thick Gasket Is Installed), 2x Rubber Gasket, 3x Shock Pad, 1x Motor Top Base Gear, 1x Black Rubber Gear.
  • ★【GREAT FUNCTIONS】Great for Smoothies and Frozen Drinks: the cross blade replacement part is perfect for chopping, grating and blending. Whips up your favorite foods and smoothies in second..
Check Stock

Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 6 Fins Replacement Extractor Blade for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL450-70 BL451-70 BL482-70

  • 【Apply To】The 6 Fins Blade is suitable for Nutri Ninja Auto iQ BL450-70,BL451-70,BL454-70,BL456-70,BL480-70,BL480D-70,BL481-70,BL482-70,BL490-70,BL487-70,BL488W-70,BL487A-70,BL486CO-70,BL491-70,BL492-70,BL492W-70 (Only fit for 12oz,16oz, 24oz, 32 oz cup)..
  • 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover.
  • The outer is made of durable PP material, Not easy to break and scrape..
  • 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade..
  • 【Packing Include 】1 x 6 Fins Bottom Blade Replacements, 1 x Replacement Gasket Rubbers ( One Gasket Rubber already on the 6 Fins replacement blade). Please make sure your Ninjia blender base has 6 Fins before order !.
  • 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can..
Check Stock

Upgrade S9892 Pressure Cooker Gasket For Mirro Pressure Cooker S-9892 9892 M-0296 M-0436 M-0498 M-0536 M-0596 M-0646 M-1952 Fit ４｜6 ｜ 8 QT Models（white） black

  • 【Mirror Pressure Cooker Gasket】Replacement pressure cooker gasket for select 4, 6 and 8 quart pressure cooker,replacement mirro pressure cooker....
  • 【Pressure Cooker Rubber Gasket 】Dimensions :Outside Diameter:10.08" , Diameter : 10" ,Thickness: 0.4" . All dimensions are approximate considering....
  • 【Mirror 9892 Gasket】Our pressure cooker sealing ring gasket are made from high-quality, durable, food-grade silicone, Its lighweight, wear, high....
  • 【PLEASE NOTE:】 Not suitable for S9882, nor suitable for righr,Fargor pressure cooker seals..
  • 【Simple to install :】 To ensure compatibility, measure your old gasket and pressure cooker pot. pressure cooker sealing rings are manufactured to....
Check Stock

Blender Blade for Ninja Blender, Blender Replacement Parts Compatible with Nutri Ninja Auto iQ Blender BL482 BL642 NN102 BL682 BL2013 (7 Fins)

  • Replacement Extractor Blade with Gasket: Compatible with 7 fins Nutri Ninja Auto iQ Blender BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)..
  • Desiged for: NN101-30, BL486CO, BL482-30, BL482, BL685-30, BL682, BL455-30, CT680SS, CT680CO2SS, BL487A, BL680A, BL487, BL682-30, BL450-30, BL642, BL640, BL642-30, BL480, BL455, BL491, BL641, BL681A, BL680A-30, BL492, BL687CO, BL641-30, BL485, BL481,etc..
  • 100% brand new and high quality: Food Grade Plastic, BPA Free & Dishwasher Safe..
  • Includes: 1x 7 Fins Bottom Blade Replacement, 1 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin..
  • Important Tips: Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you're going to use this replacement gasket..
Check Stock

FEL-PRO VS 50504 R-1 Valve Cover Gasket Set

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • STRONG AND DURABLE -- Features molded rubber over an aluminized steel carrier which resists high heat and coolants.
  • SUPERIOR SEAL -- Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal.
  • EASIER TO INSTALL -- Locating tabs assure proper alignment and easier installation.
  • PREVENTS OVERTIGHTENING -- Torque limiters help eliminate overtightening and gasket splitting and extruding.
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.
Check Stock

Beer Gaskets，50 Pieces Keg Tap Line Washer Black Rubber Coupling Gasket for Beer Seal（1/8 inch Thickness ）

  • What you get: you will receive 50 pieces of rubber washer gaskets in total, sufficient quantity to meet your needs and no need to worry about losing.
  • Measurement: the outer diameter of our hose rubber gasket is approx. 20.3 mm/ 0.8 inch, 12.5 mm/ 0.5 inch for inside diameter, the thickness is approx. 0.13 inch, proper size for your using needs.
  • Wide applications: our water hose rubber gasket is suitable a ideal choice for keg couplers and shanks, leakproof and convenient to use, practical and widely applicable.
  • Simple design: the classic simple design is lightweight and portable, you can take some pieces when you go for a family dinner party, help to to solve the wasting problem and add more interests to life.
  • Material: our rubber gaskets are made of EPDM rubber, which is waterproof and not easy to get rot, durable and you can store for a long time, small but important items in your daily life.
Check Stock

Gas Engine, 420CC 15 HP 4 Stroke Gasoline Motor Engine Recoil Start Go Kart Log Splitter Lifan Type Engine OHV Pull Start Garden Tool Gas Motor (US Stock)

  • ★【Features】Easy to start carburetor, low fuel consumption. With oil alarm. With memory function, high sensitivity, add enough oil before starting, otherwise it will turn off the flame to protect the machine..
  • ★【Durable】Iron camshaft. After 100 hours of intensive running test, it is durable..
  • ★【Good Performance】The rubber air filter gasket makes the carburetor tighter, does not leak, and has better performance. Thick silencer has good drying effect..
  • ★【Soft Rubber Handle】The crankshaft diameter is 25mm of the keyway shaft. Wide snap ring prevents the tubing from being damaged by heat. The soft rubber handle of the handle does not hurt the hand, and the metal frame is more textured..
  • ★【Advantage】Threaded fuel tank cap, there is a nitrile rubber gasket under the fuel tank to prevent vibration from damaging the fuel tank, suitable for construction machinery such as impact rafts..
Check Stock

Vitamix Classic Tamper, Black

  • ☞ 【PREMIUM QUALITY】 Outside diameter: approx. 4 inches/ 10 cm,  Inside diameter: approx. 3.75 inches/ 9.5 cm, 6mm thickness, Made of High Quality Food-grade Silicone Rubber, BPA-Free, Non-toxic, Dishwasher Safe..
  • ☞ 【COMPATIBLE WITH】 ONLY Fits for NutriBullet Pro 900w high-speed blender/mixer system, NOT Fits for Magic Bullet, NutriBullet RX, Baby Bullet blenders and Nutri Ninja Pro 900w. Please confirm the model before purchasing..
  • ☞ 【PACKING INCLUDES】 6 x Gasket with Lip..
  • ☞ 【PERFECT SEAL】 The gasket is durable and elastic, providing a good seal and a long service time. Easy installation and cleaning, perfectly match and good choice for direct replacement of original parts..
  • ☞ 【ATTENTION】 1. Please note that the gaskets are designed with a lip which FITs for NutriBullet blender with a lip, will NOT FIT for NutriBullet blenders which the gasket doesn't have a lip. 2. Please try soaking in hot water if the gasket seems too tight at first. Like any Nutribullet replacement parts, wash with soap and water before using..
Check Stock

PERA Beer CO2 Keg Regulator Beer Regulator with Safety Pressure Valve, CGA-320 Inlet for Beer Brewing Wine Making

  • 【NO LEAKS】Quality material prevents leakage excellently..
  • 【KEGGING NECESSARIES】Necessary for home kegging systems..
  • 【MATERIAL】Durable rubber, silicone and hard plastic, can be used for long time, easy to clean..
  • 【PACKGE】8 * Ball lock keg post gasket, 8 * Dip Tube Gasket, 4 * Carbonation keg lid closure gasket, 1 * o-ring gasket removal tool..
  • 【COMMONLY USED GADGET】These o-rings are used for ball lock keg post, carbonation keg lid, Cornelius Keg Dip Tube. Plastic o-ring removal tool helps you remove o-rings without scratching carbonation tools and breaking o-rings..
Check Stock