ReviewsDuramax Fuel Pump

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

iFJF 1R-0750 Fuel Filter and Refit Head and 12642623 Fuel Filter Head with Pump Replacement for GM Duramax V8 6.6L 2005-2016 Chevy Silverado/GMC Sierra 2500HD 3500HD Replaces TP3018

  • Fits model:2005-2016 GM Duramax Chevy Silverado/GMC Sierra 2500HD 3500HD V8 6.6L Diesel Engine LLY/LBZ/LMM/LML..
  • Fuel filter cross reference:TP3018,TP3012,19305685,12664429,12633243,33960XE,LFF6012,1R-0750,BF7633,P551313,P551740,FF5320,MK13104,P8334,33528,CB01405912,LFF3347,3528..
  • 12642623 filter head:Made of billet aluminum,we used the electrophoresis process to treat the surface of the base,protect it from rust and dust.Also includes a heater plug.The aluminum air bleeder screw which replaced plastic OEM screw was more durable.The hand fuel pump and two tubes were made of iron..
  • 1R-0750 Refit Head:High-Flow,Increased Filtration and Lower Cost Filter Replacements,Billet Aluminum, Black Anodized CNC machined refit head designed to allow you to replace the poor-quality OEM filter with a superior quality spin-on filter element..
  • Upgrade:We improved the process of the refit head's bolt,you don't need to remove the check ball and spring in the 12642623 fuel filter head anymore before combine the head and filter..
Check Stock

EWK 36mm 3/4 Inch Flywheel Locking Holder Water Pump Holding Tool 12 Pt Socket for Duramax 6.6L Engine

  • 【 Exclusive Design 】The set is designed for quick water pump replacement. Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • 【 Time Saver 】Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easy to install and effectively keep the flywheel from turning..
  • 【 Easy to Use 】 Locks the flywheel easily to the transmission when changing water pump. The flywheel locking tools work with Duramax 2500 / 3500 pickups and 4500 / 5500 trucks..
  • 【 Heavy Duty 】Comes with flywheel holder OEM no.AM-J-44643-A, AM-J-44643-B, and 36 mm 12 point socket. Constructed of quality CR-V Steel with a manganese phosphate coating to resist rust and corrosion..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

K&N Diesel Fuel Filter: Performance Fuel Filter, Premium Engine Protection, Compatible with 2001-2015 Chevrolet/GMC Truck 6.6L Duramax Diesel Engines, PF-3000

  • CONSISTENT FUEL DELIVERY: Diesel fuel filter kit helps ensure a clean & reliable flow of fuel to the engine.
  • HIGH-EFFICIENCY MEDIA: Premium pleated cellulose glass media provides excellent fuel system protection.
  • LONG LIFE: Quality filtration of the K&N fuel filter helps provide better protection and longer engine life.
  • DIRECT REPLACEMENT: Meets or exceeds OEM 6.6 Duramax fuel filter replacements.
  • HIGH-STRENGTH: Heavy duty steel canister construction.
Check Stock

OEM NEW 6.6L Duramax Diesel Fuel Filter Housing 05-12 Silverado Sierra 12642623

  • OEM NEW 6.6L Duramax Diesel Fuel Filter Housing 05-12 Silverado Sierra 12642623.
Check Stock

Donaldson P551313 Fuel Filter Replacement for CAT 1R-0750 (Pack of 3)

  • IGMFUFI 0750 Fuel filter Replaces for 1R0750 Filter.Fit for 269-8325, 7325,P550920, B7378..
  • For 1r0750 caterpillar fuel filter, 2001-2016 Chevy/GMC Duramax LB7/LLY/LBZ/LMM/LML.
  • Coss Reference:6016,BF7633,1R0750,P551313,P551740,FF5320,FFR85245,FFR85320,P8334,878S,35310549,LFF3347,33528,33528MP..
  • The filter has efficient filtration function,which can improve the fuel rate of the engine, protect your engine and prolong its service life..
Check Stock

kweiny Diesel Common Rail 18mm Fuel Injector Cap Block Off Tool

  • Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
  • Compatibility: Fit with 2006-2011 6.6L Chevy/GMC Duramax (LBZ & LMM) and for Dodge/Cummins 2007-2017 6.7L, Renault engine system, and other vehicles with a 18mm fuel line nut.
  • Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
  • Specification: M18x1.5mm internal thread nut.
  • Material: Carbon tool steel, surface antirust..
Check Stock

kweiny Diesel Common Rail 14mm Fuel Injector Cap Block Off Tool

  • Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
  • Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut.
  • Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
  • Specification: M14x1.5mm internal thread nut.
  • Material: Carbon tool steel, surface antirust..
Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【ELECTRIC FUEL PUMP KIT MATERIAL: 】External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life..
  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process....
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. (use with a 1/2" drive ratchet or breaker bar).
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock