ReviewsDust Collection Blast Gates

Taytools 465388 Set of 6 each 4 OD Blast Gates Self Cleaning No Clog Aluminum for Dust Collection System

  • Designed to fit 4" diameter hose or ducts.
  • Direct air flow to exactly where you need it and maximize dust extraction by opening and closing select ducts.
  • Open slot at back to for self-cleaning, no-clog operation.
  • Cast aluminum, steel sliding gate, locking knob.
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

POWERTEC 70227 6-Inch Blast Gate for Dust Collector Dust Collection Fittings

  • FUNCTION: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.
  • FEATURES: Self-cleaning and clog proof groove design to eliminate constant cleaning maintenance, along with an easy-sliding gate, and locking stop to ensure perfect gate alignment.
  • BUILD: Blastgate flaunts a heavy duty aluminum construction with a premium steel gate designed for eliminating air leakage, project flexibility and long-term usage.
  • The Blast gate Nominal 6” OD openings taper from 5. 83” to 5. 89.
Check Stock

DeWalt D24802 Grinder Side Handle # N042463

  • Both ends have 4” OD outlet diameters and are designed to work with 4” ID dust hoses or other 4” ID ports.
  • Specifications: Accepts 4” ID dust hose, port or vacuum fitting.
  • 4" Nominal end measures 3-61/64” O.D. and 3-3/4” I.D.
  • Compatibility: Will not connect directly to other 4” OD ports.
  • please confirm that the actual listed size fits your application before ordering. If connecting to a 4” OD port, a Flex Cuff or similar device will be required.
  • Function: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.
  • Quality: Made with premium black ABS plastic, this unit was designed for durability and is abrasion resistant - able to withstand daily wear & tear from dirt, sawdust and woodchips.
Check Stock

Eastwood Latch Replacement Collection System for Blast Cabinets Metal Repair Kit

  • Fits Eastwood Dust Collection System For Blast Cabinets.
Check Stock

Grizzly Industrial G0714 - Industrial Sandblast Cabinet

  • Blast compartment door size: 37-1/2" wide x 29-1/4" tall.
  • Overall dimensions: 51-1/2" wide x 69-1/2" high x 47" deep.
Check Stock

POWERTEC 70135 4-Inch Blast Gate for Dust Collector/Vacuum Fittings

  • FUNCTION: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.
  • FEATURES: Self-cleaning and clog proof groove design to eliminate constant cleaning maintenance, along with an easy-sliding gate, and locking stop to ensure perfect gate alignment.
  • BUILD: Blastgate flaunts a heavy duty aluminum construction with a premium steel gate designed for eliminating air leakage, project flexibility and long-term usage.
  • VERSATILITY: Possesses a universal fit (nominal 4”OD outlet diameter, actual size – tapers from 3-29/32 to 3-31/32”) for most shop vacs/ shop dust collector systems with 4” ID hoses for woodworking – providing a reliable port extension for your table saws, miter saws, planers, drills and other tools.
Check Stock

POWERTEC 70134-P2 2-1/2-Inch Aluminum Blast Gate for Dust Collector Dust Collection Fittings - 2 PK

  • INCLUDES: (2) 2-1/2” Aluminum Blast Gate.
  • FUNCTION: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.
  • FEATURES: Self-cleaning and clog proof groove design to eliminate constant cleaning maintenance, along with an easy-sliding gate, and locking stop to ensure perfect gate alignment.
  • BUILD: Blastgate flaunts a heavy duty aluminum construction with a premium steel gate designed for eliminating air leakage, project flexibility and long-term usage.
  • VERSATILITY: Possesses a universal fit (nominal 2-1/2”OD outlet diameter) for most shop vacs/ shop dust collector systems with 4” ID hoses for woodworking – providing a reliable port extension for your table saws, miter saws, planers, drills and other tools.
Check Stock