ReviewsDust Collection Hose Rockler

POWERTEC 70334 Dust Filter Bag for Wall Mount Dust Collectors 1 Micron For Grizzly Shop Fox Rockler Delta Wen and POWERTEC DC5371/ 5372

  • INCLUDES: 1-Micron Filter Bag 14” in diameter and 24” long with a 5-1/2” diameter x 4" long neck (Measured in inflated condition.).
  • FUNCTION: Serves as a premium replacement bag with an upgraded design, along with similar size and capacity specifications as the OEM dust collector bag for the POWERTEC #DC5370 Wall Mounted Top Dust Collector.
  • Features: A 1 micron filter bag (collecting 99% of fine dust particles).
  • and a bottom zipper for easier dust disposal..
  • QUALITY: Made with an ultra-thick, polyester felt material that’s able to withstand dry heat applications, along with everyday wear and tear.
  • COMPATIBILITY: Designed to work as a top dust filter bag for most popular power tool dust collection systems such as Grizzly, Shop Fox, Rockler, Delta, and Wen (Work with the models having an opening from 4" to 5").
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

Dust Right 2.5'' Shop Vac Hose Kit – Expandable Blue Shop Vac – 2-1/2” Elastic, Flexible Polymer Vacuum Hose Extend up to 12’ L – Kit Includes 2.5” Expandable Hose, 2-1/2 Hose Clamp, Swivel Fittings

  • 2-1/2” Blue Shop Vacuum Hose Extension Kit: This incredibly stretchy 2-1/2'' dust vacuum hose extends up to 12 ft. in length, then collapses back into a compact 2 ft. stack for storage. The dust collector hose weighs 30% less than previous versions and is offered in a blue translucent color..
  • Helps To Prevent Tangling & Tripping: This dust collection hose allows you to reach most areas of your shop, without the hassle of a long, cumbersome hose. As you move closer to your shop vacuum, it retracts to take up excess slack, which helps prevent tangling and tripping..
  • Fits In Standard Shop Vac: With the two included swivel fittings, our dust collection hose can easily connect to your shop vacuum, optional dust right accessories, and many dust ports..
  • Durable Material: The shop vac hose is made of an amazingly elastic, flexible polymer which you can apply for a long time and stretches from approximately 2' to 12' in length..
  • What’s Included? This dust collection hose with fittings kit includes (1) Dust Right 2-1/2'' Diameter. Shop Vac Extension Hose (expands from 2' to 12'), (2) 2-1/2 Hose Clamps, and (2) Swivel fittings..
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock

POWERTEC 70228 2-1/2 Inch Y-Fitting Dust Collection Hose Connector, Clear Color

  • INCLUDES: 2-1/2” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Facilitates a dual hose branch connection from a single main hose line. This versatile fitting enables you to connect two machines - or two hoses from the same machine – to your dust-collection system’s hose network. Maintains the integrity of your dust collector’s suction capacity. Easily tailor your network to the specific requirements of your shop setup and project needs..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 2-1/2” ID ports..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • DIMENSIONS: All three 2-1/2 Inch nominal end measure 2-31/64 inch OD and 2-7/32 inch ID | Material Thickness: 1/8 inch.
Check Stock

4 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each 4 inch Turnkey Stainless Steel Hose Clamps

  • When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!.
  • Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy ....
Check Stock

Dust Right 650 CFM Wall Mount Dust Collector 1 Micron – Canister Filter for Portable Dust Collection System – Remote Control Small Dust Collector Shop – Includes Mounting Bracket & Plastic Dust Bag

  • Dust Right Dust Collectors For Woodworking: Premium fabric pleats filter dust down to an incredible 1 micron in size! With this one Rockler dust collection, you'll increase the filtration of your Wall Mount Dust Collector by up to 30 times, giving the air quality in your shop a welcome boost..
  • Included Remote Control: These updated hands free dust collector accessories have a remote control so that you can control your wall dust collector more conveniently and improve your work efficiency..
  • Premium Plated Filter: The premium pleated dust collector filter captures dust down to 1-micron in size, compared to 30 microns for the stock filter bag, and 5 microns for the upgraded dust filter bag. Better filtration amounts to better safety for your lungs..
  • Easy To Use: Our hands-free dust collector is quick and easy to assembly, fully portable, quick-install dust collector bags makes emptying and re-attaching a snap.
  • What’s Included? These dust collector fittings include (1) Dust Right Canister Filter for Wall Mount Dust Collector, (1) Mounting Bracket, and (1) Plastic Dust Bag..
Check Stock

2-1/2 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each 2.5 inch Turnkey Stainless Steel Hose Clamps

  • When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!.
  • Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy ....
Check Stock

POWERTEC 70136 4-Inch Hose to 2-1/2 Inch Hose Cone Reducer

  • INCLUDES: 4” to 2 1/2” Dust Collection Hose Reducer.
  • FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop vacuum hose branch line. The 2-1/2 in. opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners.
  • PLEASE NOTE: This cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly (which would require POWERTEC 70149 or 70148 Flex Cuffs).
  • PREMIUM: Made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection.
  • DIMENSIONS: 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID.
  • 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.
Check Stock

POWERTEC 70282 4-Inch Dust Collection Hose Floor Sweep Accessories Kit

  • ACCESSORY KIT: Dust Collection Floor Sweep, 4”x36” Clear Dust Pipe, Removable Grate, Quick Connect Coupler and Handle Assembly (dust hose not included).
  • FUNCTION: Floor sweep attachment, dust collector pipe and fittings quickly eliminates saw dust, small woodchips and other debris from your workshop floor for a cleaner and safer working environment.
  • COMPATIBLE: This versatile assortment of dust collection fittings possess a 4” nominal (ID or OD), a perfect fit for any standard 4-inch flexible dust collection hose.
  • ERGONOMIC DESIGN: Adjustable handle easily allows you to position your grip and angle the floor sweeper to accomodate your specific project and space requirements.
  • MOUNTING: Includes (1) mounting bracket and (2) #8 pan head wood screws.
Check Stock