ReviewsDust Collection System For Smalshop

5' Hook and Loop Replacement Pad Compatible with Bosch ROS20VS, ROS20VSC, ROS20VSK, ROS20, ROS10

  • COMPATIBILITY WITH : Replacement Sanding Pad for Bosch RS035 & RS034.Compatible with Bosch Random Orbit Sander Model: ROS20VS, ROS20VSC, ROS20VSK, ROS20, ROS10..
  • EFFECTUVE DUST COLLECTION: Efficient 8-hole pad works with sanders that have dust collection system. 8 dust collection holes that vacuum up the dust and debris into Dust Bag Assembly..
  • SUPERIOR RUBBER PADS: High quality rubber pads engineered to provide smooth finishes..
  • PERFECT FIT: Great for general-purpose sanding and polishing. Ideal for flat surfaces and fast removal..
  • PACAGE INCLUDE :4*5-Inch Hook and Loop Sander Backing Pad.The product is not sponsored or endorsed by ,or affiliated with the brands it fit ,including Bosch.
Check Stock

Grizzly Industrial G0697X - 12\ 7-1/2 HP 3-Phase Extreme Series® Table Saw

  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately), and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

POWERTEC 70228 2-1/2 Inch Y-Fitting Dust Collection Hose Connector, Clear Color

  • INCLUDES: 2-1/2” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Facilitates a dual hose branch connection from a single main hose line. This versatile fitting enables you to connect two machines - or two hoses from the same machine – to your dust-collection system’s hose network. Maintains the integrity of your dust collector’s suction capacity. Easily tailor your network to the specific requirements of your shop setup and project needs..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 2-1/2” ID ports..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • DIMENSIONS: All three 2-1/2 Inch nominal end measure 2-31/64 inch OD and 2-7/32 inch ID | Material Thickness: 1/8 inch.
Check Stock

POWERTEC 70132 14-Inch Table Saw Dust Hood

  • INCLUDES: 14” Table Saw Dust Collector Hood.
  • FUNCTION: Makes a great seal for dust collection hose applications, ensuring optimum air quality while increasing workshop cleanliness by efficiently collecting dust, dirt and debris.
  • VERSATILE: Firmly attaches and secures to most table saws in a variety of positions (underneath or behind) and is ideal for a plethora of popular brand models, including Delta, Craftsman and others.
  • PREMIUM BUILD: Made with lightweight ABS plastic, featuring a high quality construction designed for strength and long-term durability to support your dust collection system.
  • DIMENSIONS: Outer size 14-1/16” x 14-1/16” with nominal 4” OD port (actual size tapers from 3-7/8” to 4”) and accepts standard 4” ID dust collector hose or 4” ID fittings.
Check Stock

SawStop 10-Inch Professional Cabinet Saw 3-HP 52-Inch Professional TGlide Fence System PCS31230-TGP252

  • 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

POWERTEC 70132V 14\ Table Saw Dust Hood, 1 PK

  • INCLUDES: (1) 14 Inch Table Saw Dust Collector Hood..
  • FUNCTION: Makes a great seal for dust collection hose applications, ensuring optimum air quality while increasing workshop cleanliness by efficiently collecting dust, dirt and debris..
  • VERSATILE: Ideal for a plethora of popular brand models, including Delta, Craftsman and others. Firmly attaches and secures to most table saws in a variety of positions (underneath or behind)..
  • PREMIUM BUILD: Designed for strength and long-term durability to support your dust collection system. Made with lightweight ABS plastic, featuring a high quality construction ..
  • DIMENSIONS: Accepts standard 4” ID dust collector hose or 4” ID fittings. Outer size 14-1/16” x 14-1/16” with nominal 4” OD port (actual size tapers from 3-7/8” to 4”) ..
Check Stock

BLACK+DECKER Random Orbit Sander, 5-Inch (BDERO100)

  • HIGH PERFORMANCE ORBIT SANDER - 2.0 Amp corded electric random orbit sander for a swirl-free finish.
  • HIGH EFFICIENCY - Delivers 12000 OPM (orbits per minute) to quickly sand material.
  • LIGHTWEIGHT AND COMPACT - Fits in tight spaces for more versatile sanding.
  • DUST COLLECTION SYSTEM - Keep your workspace free of dust and debris with a built-in dust collection bag.
  • COMFORT GRIP HANDLE - Work comfortably and with less fatigue thanks to the comfort grip handle.
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock

5 Inch Replacement Sander Pad for Bosch RS035 & RS034 - Compatible with Bosch ROS20VS, ROS20VSC,ROS20VSK,ROS20, ROS10

  • 【COMPATIBILITY】: The 5 Inch Hook & Loop Replacement Sander Backing Pad for Bosch RS035 & RS034 is compatible with Bosch ROS20VS, ROS20VSC, ROS20VSK, ROS20, ROS10..
  • 【8 DUST COLLECTION HOLES】: Efficient 8-hole pad works with sanders that have dust collection system. 8 dust collection holes that vacuum up the dust and debris into Dust Bag Assembly..
  • 【SUPERIOR RUBBER PADS】: Flexible, general-purpose rubber pad allows flat or contour sanding without gouging..
  • 【MOUNTING THREAD】: Built-in mounting thread for quick and easy installation, and for increased abrasive paper grip..
  • 【PREVENT DAMAGE】: Prevents damage to disc holders. Ensures a smooth, polished result. Attaches easily and hassle-free..
Check Stock