ReviewsDust Test Chamber

ZVac Replacement Kenmore Style C/Q Micro Filtration Canister Cloth Vacuum Bags Compatible Kenmore 5055, 50557 (Pack of 25)

  • 25 High Quality Total Kenmore Style Canister Cloth Vacuum Bags by ZVac.
  • Designed to fit/Compatible with – Kenmore 5055, 50557, 50562.
  • These bags may appear larger than standard paper bags (aprox 14″ wide x 15″ long) as it is made completely flat with no pleats. However once the bag is mounted on the intake port (inside the dust chamber), simply tuck all the edges of the bag inside to allow the door or hatch to seal completely shut. The bag will then expand to the size of the dust chamber when the vacuum is switched on allowing it to hold more debris than a standard pleated filter bag.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

5 Gallon Vacuum Chamber,Fencia Heavy Duty 5 Gallon Stainless Steel Vacuum Degassing Chamber Kit w/3 CFM Pump Hose (Shipping from USA)

  • ✔️【WORKING PRINCIPLE 】- Heavy duty vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components.Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins..
  • ✔️【HEAVY DUTY】- Heat cured silicone gasket is chemically resistant to solvents like butane and does not loose vacuum over time.Hydro-tested stainless steel container is high strength, withstands up to 160ºF.Heavy duty 3/4" shatter resistant acrylic crystal lid allows you to see inside and bulletproof..
  • ✔️【EASY TO USE】- Both the release valve and ball valve are built into a single unit for ease of use, brass fittings fit all vacuum pump ports50 micron air button reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber..
  • ✔️【CONVENIENT】- 9.4.75" x 4.75" non stick silicone pad allows you to easily remove resin mixes.Max vacuum rated to 29.9inHg at sea level.Our vaccum chamber pairs perfectly with single or dual stage 3 to 9 CFM pumps.Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone.Clear lid allows for you to see air being vacuumed out of your res....
Check Stock

Ficero Chamber Safety Flag for Rifle Handguns Shotgun Pistol, Chamber Flag Includes Built-in Flathead Tool with Bonus DIY Key Chain Tags (Pack of 6)

  • Hard but none scratch polymer composite material, won't leave any sign on your firearms..
  • Chamber flag fits snugly in most common rifle and pistol calibers including 9mm, 22lr, .223, 5.56, .308 and .45 ACP.
  • Well Designed & Bright Color, allowing the breach to close and protect the chamber from dust and debris while still proving safe..
  • Includes built-in flathead tool and a slide-on Picatinny rail adapter for conveniently storing your flag between uses without losing it..
  • Comes with 6 PCS chamber safety flags & 6 PCS key chain tags..
Check Stock

Kodak 3D Printer Portrait, White, 21.1 x 20.7 x 20.7 in

  • Dual extrusion with lifting nozzles: print almost any geometry with accuracy and reliability.
  • Fully enclosed chamber: controlling the printing environment is crucial for print quality and safety.
  • Full connectivity: Wi-Fi, usb stick and a great integration with email, file sharing services and social networks. Operating ambient temperature- 10 - 30 ºC.
  • Although open to using third-party filament, Portrait’s cartridges and enclosed chamber prevent KODAK 3D Printing Filament from absorbing humidity or dust.
  • Automatic calibration and leveling for a seamless 3D printing experience.
Check Stock

BLATN Smart 128s Air Quality Monitor Indoor CO2 PM2.5 TVOC Meter Formaldehyde HCHO Detector VOCs Pollution AQI Tester PM1.0 PM10 Dust Particle Counter Data Logger Home

  • ... 6-channel tiny particle number detection (Number of particles/liter)--PM0.3, PM0.5, PM1.0, PM2.5, PM5.0, PM10.
  • 3-channel particulate matters quality detection (μg/m³)--PM1.0, PM2.5, PM10.
  • 003cb003eCO2 & HCHO SENSOR003c/b003e -- NDIR Non-Spectral Infrared CO2 Carbon Dioxide Sensor with self-calibration, Absorption chamber Optical Coating.
  • Electrochemical formaldehyde HCHO sensor with automatic calibration, double platinum catalytic electrode, strong anti-interference ability.
  • 003cb003eTVOC CHEMICAL POLLUTION003c/b003e -- Semiconductor TVOC meter can test a variety of volatile organic compounds TVOC VOCs, such as benzene, toluene, xylene, aromatic hydrocarbons, aldehydes, hydrogen sulfide etc., captures the change in molecular concentration of organic compounds at the thousandth level.
  • 003cb003eDATA LOGGING UPGTADE003c/b003e -- Smart air quality monitor indoor upgrade in 2021: Support data storage and export of all 12 testing items, with date and time, frequency: once every 1 minute. MAX storage capacity can be expanded to 8G, which can store up to 400 days of records.
  • 003cb003ePROFESSIONAL & ORIGINAL003c/b003e -- air quality alarm base on US standard.
  • stereo air convection sampling and active air interactive syste....
Check Stock

Aqueon Products-supplies-Aqueon Filter Cartridge Small/6 Pk

  • ...re than four weeks, so you need to replace it with a new one to keep the water source healthy and clean at all times. Suggest to change filter cartridge every 2-4 weeks..
  • Quick Installation: Just remove used cartridge and rinse new cartridge under cool water to remove dust. After rinsing, insert caftridge into flter chamber to protect the health and safety of your fish all the time..
  • High-quality After-sales Service: HiTauing produces high-quality filter cartridges for fish tank filter, and is in a leading position in the quality and craftsmanship of all our products. We maintain a thorough quality control process to ensure compatibility with TOP FIN ELEMENT EF-S. If you have any questions, please feel free to contact us!.
Check Stock

New Position 3 Gallon Vacuum Chamber Stainless Steel stabilizes Degassing Urethanes, Silicones and Epoxies, High Vacuum Compatible with New Position Vacuum Pump

  • ✅【Good Sealing】 Maintain high vacuum for over 24 hours.(24-hour leak is less than 2.0 inHg).Support vacuum level down to 29.9" Hg.
  • ✅【High Quality】 1/2" Acrylic lid, not only is impact -resistant but also gives a better observation for work.Stainless Steel's resistance to corrosion plus heat and chemical damage is second to none.
  • ✅【High Precision】 The meter is installed in a separate port, so the reading is accurate even when pumping/venting the meter. 50um air filter on the exhaust valve to reduce air flow and prevent dust/dust from flowing into the chamber..
  • ✅【Easy to Install】 Easy to install in less than 5 minutes without any special tools. The Vacuum Chamer comes with 3ft hose and oil filled gauge, can be easily removed with the shut off valve turned..
  • ✅【Widely Application】 3 Gallon Lab Vacuum Chamber kit is used to degass silicones, epoxies, essential oils, and urethanes, etc.Perfect for stabilizing wood and other experiments with volitile compounds..
Check Stock

Mechanics Stethoscope, Auto Diagnostic Mechanical Testers Automotive Cylinder Stethoscope Kit Car Engine Test Tools Hearing Set for Cars Trucks Motorcycles

  • ...l for the car is constructed of heavy duty tubing and ABS plastic ends for strength, durability, and longevity, Shockproof handles make work safe and secure.
  • Comfortable rubber ear buds isolate outside noises.
  • [High Sensitivity]: This mechanic stethoscope car and motorcycle diagnostic tool features a sensitive sound chamber that amplifies sounds.
  • Clear sound quality, high sensitivity, can quickly locate the abnormal sound of the engine, super sensitive ear, and probe parts, car engine mechanical hearing testers could avoid the influence of noises, so that you can easily detect the issues within your engine.
  • [Diagnose Various Engine Issues]: Whether you are a professional mechanic or a hobbyist, the auto stethoscope engine diagnostic tool is ideal for pinpointing issues within your engine.
  • Identifying broken gaskets, bad pulleys, damaged gears, defective valves, water pump failures, and other defective or damaged parts that cause odd noises and faulty operation.
  • [Shockproof ABS Handle]: Shockproof abs handle and sound amplification chamber, can effectively locates trouble spots within the engine block or anywhere when trying to locate rattles.
  • This engine stethoscope set includes 2 metal probes: 3.5 inch and 8.5 inch,extending to 12” long,easily a....
Check Stock

Forster Products Sammi Dimensioned Headspace Gage, Rimless, Hardened Steel, Precision Ground, 350 Legend, NO-GO

  • 350 LEGEND: Use to check headspace of 350 Legend..
  • RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference betwee....
Check Stock

JET JOSS-S Oscillating Spindle Sander, 1HP, 1Ph 115V (723950)

  • EFFICIENT DUST COLLECTION: Includes a 4" port, and baffles create a chamber under the table for improved dust collection..
  • VERSATILE POSITIONING: Table tilts 45° front and 15° back, and features a 90° quick index..
  • CONVENIENT STORAGE: Cabinet in base provides designated slots for spindles and table inserts..
  • ADDED SAFETY: Integrated paddle switch with safety key..
  • LONG LIFE: Worm and gear mechanism runs in an oil bath to prolong its life and durability..
Check Stock