ReviewsDwv Copper Fittings

Coupling, PVC, 40, 8 In., Slip x Slip

  • Cleanout plug for closing the end of a cleanout adapter.
  • Male NPT threads for connecting to female threaded pipes.
  • PVC for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Operating temperature range of 73 to 140 degrees F (23 to 60 degrees C).
  • Complies with ASTM D2665 and ASTM D3311 and certified to NSF/ANSI International Standard 14 (NSF-dwv) and NSF International Uniform Plumbing Code (NSF-U.P. Code).
Check Stock

Pipe Décor 1½ in. x 6 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 6 Pack

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

OEM 1005822-00 Replacement for DeWalt Rotary Hammer Selector D25023K D25012K

  • Replacement float cage, part number N265199.
  • Compatible with: DWV010X, DWV010, DWV010, DWV012, DWV012.
  • Measures approximately 5.30 X 4.85 X 2.85 inches.
Check Stock

Sioux Chief Closet Flange Push-Tite Pvc 4

  • 4" PVC "Push-Tite" "TKO" gasketed closet flange.
  • Installs inside 4" cast iron, plastic, copper DWV pipe, also glues over 3" plastic pipe.
Check Stock

C447-020 2 CAP (SLIP)

  • PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
  • Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
  • May be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors.
  • Conforms to CSA B602, certified and UPC approved, rated for underground use.
  • Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check Stock

Oatey 43791 PVC Saddle Tee Kit, 4-Inch x 2-Inch,White

  • The product is highly durable and easy to use.
  • For tapping into a 3-Inch or 4-Inch Sch. 40 DWV line.
  • Saddle is solvent welded to the existing line and secured with metal V-bolts, washers and nuts provided in the kit.
  • The tee accepts the incoming line inside the socket, or joins with a Sch. 40 DWV fitting.
Check Stock

Christy's Handy Pack: Wet Or Dry Conditions Medium Body PVC Cement and Purple Primer, 1/2 Pint (8 fl oz)

  • Sets and cures quickly in wet/dry conditions for easy, efficient use.
  • Cement works without a primer for non-pressure systems up to 6" and with pressure systems below 4".
  • Designed for a variety of applications including PVC pipe and fitting, potable water, pressure, non-pressure, conduit, drain, duct, DWV, and sewer.
  • Both products are low-VOC for a pleasant working experience.
  • Purple Primer aggressively softens the surfaces of PVC and CPVC pipe and fittings - Form a complete pipe joining solution.
Check Stock

Rubber Flex Coupling Unparallel 1-1/2” x 1-1/4”, Black

  • COMPATIBILITY. Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping.
  • SIZE. 1-1/2” x 1-1/4” and Unparallel.
  • MARKING. Each Rubber Fitting is marked with part number, size, and certifications..
  • USED. May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors..
  • CONVINIENCE. A pair of hose clamps included. No need to use adhesives or tapes for connection..
Check Stock

Oatey 30246 PVC Regular Cement and 4-Ounce NSF Purple Primer Handy Pack

  • ALL-PURPOSE CEMENT AND PURPLE PRIMER HANDY PACK: Includes one 4 oz. can of all-purpose clear cement and one 4 oz. can of purple primer for PVC pipe....
  • REGULAR CLEAR CEMENT: Recommended for potable water, pressure pipe, conduit, and DWV applications, and it flows freely and sets up quickly at the....
  • INDUSTRIAL-GRADE PURPLE PRIMER: Recommended for use on CPVC/PVC pipe and fittings of all schedules and diameters, and it is for use in areas where....
  • AGGRESSIVE PRIMING: Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent....
  • COMPLIANCE: Both the cement and primer are certified to UL Greenguard Gold, NSF and UPC approved, exceed ASTM Standard D2564 and ASTM F 656, and....
Check Stock

SharkBite 1-1/4 to 2 Inch PEX Crimp Tool, 24675

  • ...imp Tool Kit works with 4 sizes of PEX tubing - 3/8-in., 1/2-in., 3/4-in., 1-in. (The tool itself) and includes a Decrimping Tool (for crimp ring removal) -all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings.
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively).All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc..
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Crimp Ring Removal Tool: Allows PEX fittings to be used more than once. It is designed to remove copper crimp rings with gentle action that will not damage fittings. The easy dial setting adjusts for crimp ring sizes. Compatible with brass and PPSU fittings.
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for correct adjustment at....
Check Stock

Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 3' Socket

  • PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
  • Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
  • May be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors.
  • Conforms to CSA B602, certified and UPC approved, rated for underground use.
  • Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check Stock