ReviewsDynomax Super Turbo Mufflers

Dynomax 36484 Exhaust Pipe Spout

  • Inlet Dia.: 2.5" - Outlet Dia.: 3" - Overall Length: 6".
  • To ensure proper fit make sure your exhaust diameter is under 2.5".
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH

  • Brand New Flowmaster Super 44 Series Chambered Muffler, 3.00" Center In, 2.50" Dual Out, Black Finish (Holley Part #9430452).
  • Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
  • Features: Race proven Delta Flow technology | Recent 2 chamber improvement | Noticeable interior resonance | Deep Aggressive Sound Exhaust Note.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

Dynomax 53453 Exhaust Y Pipe

  • IMPROVED FLOW CAPACITY -- Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
  • DESIGNED TO PERFORM -- Fixture checked to ensure a precise fit for quick and easy installation.
  • AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair.
  • PREMIUM MATERIALS -- Made from quality 16-gauge aluminized steel for durability and long life.
  • BUILD IT YOURSELF -- Design and custom fabricate your own exhaust system with DynoMax pipe.
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05

  • Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with DL10 with Stubby 14" Carbon Fiber Round Muffler

  • Delkevic DL10 14" carbon fiber round mufflers are manufactured from a pre-formed composite carbon fiber sleeve and 304 stainless steel. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Permatex 80335 Muffler and Tailpipe Sealer, 3 oz.

  • Seals holes and leaks in mufflers, tailpipes and around joints.
  • Temperature Range: up to 2000°F (1000°C).
  • Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters.
  • exhaust system must be cool before applying.
Check Stock