ReviewsE3cv Axle

Independent Skateboard Hardware 1\ Phillips Black/Red 8 Nuts and Mounting Bolts

  • Includes 8 axle washers and 4 axle nuts from Dimebag Hardware..
  • Speed washers increase speed and promote longer bearing life by reducing friction between the bearing and axle nut and hangar..
  • Having brand new lock nuts will keep your wheels from falling off. The more you replace your wheels and bearings, the more the axle nuts wear out and lose their ability to stay tight. These fresh new nuts will keep you locked up! Produced with top quality materials. The thread size for these axle nuts is 5/16"..
  • This kit features products that are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size)..
  • The 4 locknuts and 8 washers included are enough to outfit 2 trucks..
Check Stock

Primos Neoprene Bow Sling

  • Fits all bows 28 to 38-inch axle-to-axle and all parallel limb bows, optimized for normal and large size cams.
  • Soft and durable neoprene protects your bow's strings, cables and cams while in the field.
  • Comfortable EVA molded shoulder sling with no-slip rubber grip for hands-free carrying.
  • Quickly and quietly slips on or off bow cams.
  • Security straps and quick-snap buckles guarantee your bow stays secured and qualifies as a lock in some states with case requirements.
Check Stock

Pinewood Pro PRO Axle Inserter Guide from for Inserting axles in Pinewood Blocks

  • Easily align derby car axle in pre-cut slot and get perfect wheel spacing with one-piece axle guide.
  • Axle Guide rib is concave so your axle slides straight in.
  • Thumb depression makes it easy to hold Axle Guide in place.
  • Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble.
  • One piece construction with built-in wheel spacer. No extra tools needed..
Check Stock

TBAPFS 4Pcs 1/2\ Drive Deep Impact Socket Set 12 Point Metric 30mm 32mm 34mm 36mm Drive Spindle Axle Hub Nut Socket Set,Heavy Duty with Portable Storage Case,Use In Removing And Installing Axle Nuts

  • 【Size】Axle Hub Nut Hex Socket Set Including 30mm, 32mm, 34mm, 36mm. Provides the most common size sockets used in removing and installing axle nuts, spindle nut applications. Extra deep to fit various axle lengths. Each socket has a drilled head to locate retaining ball bearing on most breaker bars and impact wrenches to ensure a safe secure fit..
  • 【Work Exquisite】Heavy-duty impact quality for use with a 1/2inch drive impact tool. Manufactured from chrome steel with heat-treated for extra strength and durability, oxide finish to resist rust. The specially hardened sockets with corrosion protection are designed for the removal of damaged bolts, screws and nuts..
  • 【Professional】The 12-point spindle design keeps a tight grip and reduces damage to the wheel nut. Install, Removal, Repair to remove, install, and repair hub or axle nuts on your vehicle. Fits axle nuts on most vehicles. The innovative spiral profile digs itself into the head of a damaged screw or nut, allowing it to be easily loosened..
  • 【Axle Nut Removal】Our axle nut socket toolset is ideal for removing front-wheel-drive axle nuts. A complete toolset that will help the user with many axle nut removal jobs. All parts are well packed and assorted in a plastic box for convenient stor....
Check Stock

Benlari Black Axle Nut Covers Front Axle Caps 2002-2023 Compatible for Harley Davidson Touring Softail Sportster Dyna Trike Electra Street Road Glide Road King Fat Boyoy 2002-2021

  • Compatibility: 【Front Axle Nut Covers】It is front axle nut covers compatible for Harley Davidson Softail 2007-later (except Springer, Rocker),Touring 2008-later and Trike models,Dyna 2008-later,Sportster 2008-later,VRSC 2002-2011 models (except V-Rod Muscle and Street Rod)..
  • Note: 【2 screws 】The axle caps are 2 set screws and it can hides on your bike perfectly.Please check the size and confirm compatibility of this item before ordering..
  • High Quality:【Durable,Waterproof and Not Rusty】The axle covers are made of aluminum.Protect front axle hardware from dirt,moisture,dust and other external damage..
  • Easy Installation:【Come with mounting hardware】You can install the axle covers in minutes..
  • Package Contains: 【6 Months Warranty】1 pair of 1.2 Inch front axle nut caps with mounting screws (as picture shown) .Instruction NOT included..
Check Stock

Tusk Racing Axle Block Orange - Fits: KTM 250 SX-F 2005-2012

  • ️Compatibility: Front axle nut cover with Electra Glides, s and Road Kings / Road Glides / Dynas / s / V-Rod (except VRSCR and VRSCF) / Softails (except Deuce, Springer and Rocker). - davidson breakout.
  • ️Fashionable appearance: low-key appearance, stylish design and classic colors, with decorative functions, stylish appearance and improved car grade. Make your car look more dazzling. Hidden front axle hardware makes the appearance look cleaner. - davidson accessories.
  • ️High quality: For for HARLEY Axle Nut Covers is made of high-quality CNC aluminum, sturdy and durable, which maximizes durability and ensures quality. If there is a quality problem....
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints

  • Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
  • Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
  • Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
  • Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
  • 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

Pro Bamboo Kitchen 1 Pair Durable Steel Axles Black Hollow Hub Shaft Front and Rear Axle Kit MTB Quick Release Bicycle Hub 108mm, 145mm for Mountain MTB Bike

  • Type: 1 pair of quick release central axle of bicycle, including 1 front axle and 1 rear axle.
  • Made of high-quality iron material, solid iron structure, electroplated surface, not afraid of grinding and corrosion resistance.
  • It can be used for quick repair of mountain bike, quick release axle of rear wheel hub, mountain bike and training bike. The best choice for bike lovers.
Check Stock

munirater Rear Live Axle Kit Brake Assembly Replacement for Drift Trike Go Kart

  • Rear live axle kit replacement for Go Kart.
  • replacement for many 50cc 70cc 90cc atv quads.
  • replacement for Atomik, Motowork, DHZ, LEI..
  • This rear axle kit for trike is made of quality materials, very sturdy and practical, high performance and long service life..
  • This is premium and durable live axle kit for rebuild Go Kart Quad or Trikes..
  • This is a complete rear axle kit and brake kit assembly for go kart, which is perfect for DIY go kart projects or rebuilds..
  • Package includes: rear axle kit, brake assembly, pair of pillow blocks, T8F chain..
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock