ReviewsEasy To Use Socket

DEWENWILS Light Socket with Grounded Outlet Porcelain Pull Chain Light Fixture E26/E27 Base 2 Pack UL Listed

  • STURDY LIGHT SOCKET BASE - Made of porcelain materials, the light socket offers robust quality in use, providing a new lighting location in narrow....
  • ONE GROUNDED OUTLET - Equipped with an always-on 3 prong outlet, you can have a power place for an additional lights or appliance.
  • EASY INSTALLATION - The porcelain light socket is specially design for easy installation, saving your trouble from drilling holes, suitable for....
  • SMOOTH PULL CHAIN - Using pull chain to turn on/off the bulbs on the light socket, 90cm pull chain operates smoothly and long enough for use.
  • COMPATIBLE BULBS - E26/E27 bulb base, compatible with incandescent, CFL or LED bulbs (max. 660W), power rating: 125 VAC, 15A, INDOOR use only, UL....
Check Stock

Suspension Strut Spreader Socket Tool Strut Knuckles Remover Shock Absorber Ram Dismantle Socket Compatible with Audi VW, compatible with Ford, compatible with BMW, compatible with Citroen (Pack of 2)

  • Must Have Tool for Remove Strut : It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks. and very easy to knock it out of the spread position, makes removal suspension strut much easier.
  • Easy To Use: With this spreader, it slides easily into place and effortlessly holds the knuckle apart so you can remove the old strut and pop the new one right in immediately without any struggle. use 1/2" ratchet connect spreader socket.
  • Not Damage Axle: No need to ever again sledge hammer away at the knuckle if you have this tool, eliminating any potential damage to the steering knuckle.
  • Fit Many Automotive: Include 5*8mm, 4.5*6.5mm different size two spreader socket , so this kit fit many car, fit VW Golf IV, compatible with Audi, compatible with Ford, compatible with BMW, compatible with Citroen, compatible with SKODA, Seat, Renault, Peugeot etc.
  • Durable: This suspension strut spreader socket made of high quality steel, high hardness and very strong, and we offer lifetime warranty, we will replace or refund, if our suspension strut socket have any quality problem.
Check Stock

ABN Spark Plug Socket Set – 6 Piece 3/8in Drive Magnetic Socket Extension Set Spark Plug Removal Tool Set

  • LONG REACHING SPARKPLUG SOCKETS: The ABN 3/8-inch drive Magnetic Socket Extension Spark Plug Extractor Set will help you install and remove deep-set spark plugs easily and quickly.
  • Set includes (1) 3/8 to 13/16-inch spark plug extension socket, (3) 3/8 to 5/8-inch swivel extension sockets, and (2) 9/16-inch socket adapters that fit your 3/8-inch square drive spark plug wrench or the included 5/8-inch extension sockets.
  • COMPATIBLE WITH YOUR VEHICLE: Fits your 3/8-inch drive spark plug wrench and ratchet tools (not included) and provides a secure grip on any 5/8-inch, 9/19-inch, or 13/16-inch diameter spark plug (not included).
  • 5/8 inch spark plug sockets offer 4.25, 6, and 11-inch (10.8, 15.2, and 27.9 cm) extension to reach deep set spark plugs while the 9/16-inch socket adapters offer an extra 2.5 inches (6.4 cm) of extension.
  • The 13/16-inch socket has a 6-inch extension.
  • SECURE GRIP ON YOUR SPARK PLUGS: Most pieces in this magnetic spark plug socket set feature a 360-degree swivel from the lengthy extension bar to provide maximum flexibility when working.
  • Knurled grip allows for a comfortable and secure hold, while magnetic socket core holds and protects spark plugs for easy removal and installation to minimize the possibility of dropping and da....
Check Stock

2 Pack E26 Light Socket to Plug Adapter, Heat-Resistant 2/3 Prong Light Socket Outlet - High-Quality Light Bulb Plug Adapter, Polarized Light Socket Adapter Splitter Converter for Garage Porch White

  • 【Perfect Design Light Bulb Socket Adapter】The light bulb socket adapter can convert light socket to both 3 plug and 2 plugs , 2 times the number of available outlets compared with 2 prong light socket adapter, a wider range of applications.
  • 【High-Quality Light Bulb Socket Adapter 2/3 Prong】Light socket outlet is made of high-quality fire-proof material PC, the PC have been thickened, more heat-resistant than other brand, high temperature-resistant up to 200℃. This light socket plug is US standard to ensure your product is backed by the highest standards of safety and performance..
  • 【Widely Used & Easy to Install Light Bulb Outlet Socket Adapter】Turn off the light fixture, remove existing bulb and simply screw the adapter securely before inserting a plug. Use in a space that might not have an outlet where you need it most like in your garage, patio, porch, workshop or shed. Nice for electrical, household, Industrial, machinery and other appliances..
  • 【Light Socket Plug Adapter Rating】E26/ E27 3 prong light bulb socket adapter are 15A、125V、60Hz、1850W. Rated for indoor use only and not in wet locations..
  • 【After-Sales Service & Warranty】100% satisfaction guarantee. We will provide 45 days money back guarantee and 12 months Warr....
Check Stock

OEMTOOLS 22487 3 Piece Metric Magnetic Socket Organizers, Socket Organizers for Toolboxes, Socket Organizer, Magnetic Socket Holder, Black Tool Box Organizer

  • MOBILE ORGANIZER: Moving sockets about the garage or shop with our metric magnetic socket organizer set is easy.
  • Attach our metric socket organizer tray to metallic lifts, rolling carts, and more.
  • Works upside down on tricky jobs without spills.
  • QUICK SORT STORAGE: Identify sockets easily with the magnetic socket holders.
  • Our magnetic tool organizer is numbered for ease-of-use.
  • This 3-piece metric set comes with 75 slots, in 1/4 inch, 3/8 inch, and 1/2 inch sizes for deep and shallow sockets.
  • EFFICIANCY ENHANCMENT: OEM TOOLS magnetic tray's sizing system makes your shop or garage extra efficient.
  • Find the right socket for your pneumatic ratchet or power tools immediately with our metric socket set organizer.
  • STRONG MAGNETIC HOLD: Get creative with our magnetic socket tray on ferrous surfaces.
  • Sticks to tool chests, rolling carts, lifts, you name it.
  • Our magnetic socket tray holds sockets firmly.
  • Handy tool box socket tray/tool chest organizer.
  • DURABLE SURFACE PRESERVER: No one likes damaged surfaces.
  • Our metric socket organizer magnetic rubberized backing keeps your metallic surfaces scratch free.
  • OEM socket organizers are made with high-impact plastic to survive your hectic garage or shop.
Check Stock

NEIKO 02461A 3/4 Inch Drive Impact Socket Set, SAE 1” to 1-1/2”, 8 PC, Deep/Jumbo Sockets, Chrome Vanadium Cr-V

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point SAE sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each standard socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched standard size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON SAE SIZES: Includes eight common Standard socket sizes (1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inch) with blow-mold storage case included..
Check Stock

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

  • STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
  • This socket set organizer accepts both shallow and deep sockets.
  • USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
  • 1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
  • SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
  • BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
  • Socket clips constructed from heavy-duty plastic.
  • End caps constructed from soft plastic (caps removable).
  • Set holds up to 48 sockets (16 sockets per rail).
  • SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
  • Your sockets attach to plastic clips which are friction fit to the aluminum rail.
  • The clips are held in place by soft plastic end caps that are also friction fit to the rail.
Check Stock

Hedume Set of 6 Socket Organizer Trays, Socket Rails, Red SAE and Black Metric Socket Storage Trays, 1/4', 3/8' and 1/2' Drive Deep and Shadow Socket Holders, Holds 80 SAE & 90 Metric Sockets

  • Long-lasting Socket Storage - These lightweight toolbox organizers are made of a rugged ABS plastic that is strong enough to endure a lifetime of use.
  • Durable socket trays for tool boxes are designed with professionals in mind..
  • Tool Box Socket Organizer - Store and organize 1/4”, 3/8”, and 1/2” drive sockets.
  • These socket organization trays store a wide array of the most popular SAE and Metric mechanic sockets.
  • Sockets organizer stores shallow and deep-well sockets..
  • Organizer Workspace - Socket tray posts are clearly labeled with measurements for easy identification.
  • Never misplace another socket with this labeled socket organizer.
  • Our tool socket organizer cleans up cluttered tool boxes and workspaces..
  • Secure Hold - Every socket organizer tray features an extended base to keep sockets in place.
  • Each socket tray set is designed not to tip over, so sockets won’t come loose or dislodge.
  • Size Ranges - 1/8” to 5/8”, 4mm to 15mm (1/4" drive).
  • 1/4” to 1”, 6mm to 20mm (3/8" drive).
  • 3/8" to 1-1/4", 10mm to 27mm (1/2" drive)..
Check Stock

ABN Twist Socket Set Lug Nut Remover Extractor Tool - 5 Piece Metric Bolt and Lug Nut Extractor Socket Tools

  • SOCKETS PROVIDE STRONG GRIP ON LUG NUTS: The ABN Twist Sockets Set Stripped Bolt Extractor Set allows you to bite into and remove worn locking nuts to....
  • USE WITH YOUR TOOLS: 1/2-inch square drive fits your wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (not included).
  • PERFECT SIZE FOR YOUR NEEDS: These lightweight twist socket nut extractors includes 17MM, 19MM, 21MM, and 22MM bolt and nut remover sockets.
  • EASY TO USE: Choose an appropriate twist ratchet socket from the deep twist socket set then hit it with a hammer onto the damaged nut.
  • BUILT TO LAST: HRC 50-53 hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.
Check Stock

Tite Reach 3/8 Do-it-Yourself Extention Wrench Model

  • [Repair with Ease]: Depend on the ABN Wrench Extender Tool 3pc Socket Wrench Extension when repairing trucks, vans, cars, and more.
  • [For Your Tools]: Socket extension allows you to switch between 3 adapters to fit your socket or impact wrench (not included).
  • [Quality You Need]: No need to worry about this torque wrench bending and breaking at the seams.
  • Offset extension wrench is constructed of heavy-duty....
  • [Easy to Use]: Torque wrench allows you to fit into awkward and hard-to-reach areas under the hood without strain or stress.
  • [Heavy-Duty Size]: Socket set extender measures 15 inches (39cm) to provide maximum stability as you work on your cars and trucks.
Check Stock

Hotop 20 Sets Skate Wheel Socket Screw Inline Roller Skate Screws Shaft Hex Socket Screw with 2 Pieces Installation Tool

  • Enough quantity: you will receive 20 sets of skate wheel socket screws with 2 pieces installation tools, enough amounts to meet your long-term using needs.
  • Precision size: the width of the socket screw hex measures approx. 5/32 inch/ 4 mm, and the shaft diameter is about 15/64 inch/ 6 mm, the overall size measures approx. 37 x 13 mm/ 1.5 x 0.5 inches, please confirm the size before buying.
  • Quality material: these skate wheel socket screws are made of quality metal, which possess good performance, sturdy and reliable to improve the service life and durability of bearings.
  • Simple installation: you can easily fix the two ends of the skate wheel socket screw with the installation tool we provide, and then install your on the skates, easy and convenient to use.
  • Easy to carry: these inline roller skate wheel socket screws are small in size, they are packed in a box, easy and portable for you to carry and store.
Check Stock