ReviewsEcolink Z Wave

2gig GD00Z-5 Z-Wave Garage Opener Door Contact Sensor Black

  • Go control Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
  • Nortek security & control/go control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide....
  • Add Z-wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-section garage door.
  • Linear Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
Check Stock

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

  • The WD500Z5-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection. The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range)..
  • Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
  • Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.
Check Stock

Aeotec Smart Switch 7, Z-Wave Plus S2 Wireless Control Socket Zwave Plug for Home Automation, 15A, Gen7, White

  • Aeotecs smallest, best-certified smart plug built with Gen7, Z-Wave Plus, S2, and SmartStart. 30% smaller than past smart switches at only 2.4x1.5x1.2 inch - so small that it doesnt block other power outlets!.
  • 99% accurate energy metering inbuilt. Analyses how much electricity youre spending in real-time and reports it back to Z-Wave gateway software..
  • Z-Wave Plus, 700 series, and Z-Wave S2 certified for 30% quicker response time, 150% better wireless range, and 3-layers wireless security encryption. Z-Wave certification number: ZC12-20050064..
  • Inbuilt surge protector: protects your electronics from surges / spikes that are up to 2,000 volts. Inbuilt over-current protection up to 16 amps..
  • Compatible with certified Z-Wave gateways. Tested to work with Aetoec AutoPilot, Aeotec Smart Home Hub, Samsung SmartThings, Hubitat, Vera, ISY994i ZW and more..
Check Stock

Aeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Enbrighten 55256 Z-Wave Plus Smart Receptacle, Works with Alexa, Google Assistant, Tamper-Resistant, 1 ZWave 1 Always On Outlet Hub Required, White

  • "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • Wirelessly control lights or appliances by turning them on and off, schedule a timed event, or create a custom scene from anywhere in the world, at any time of the day. Works with all LED, CFL, Halogen, and Incandescent bulbs..
  • Features one always-on pass-through AC outlet and one Z-Wave enabled outlet with tamper resistant outlets..
  • Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).DescriptionTransform any home into a smart home with the GE Z-Wave plus wireless smart lighting control Duplex receptacle. The GE Z-Wave Duplex receptacle enables wireless control of on/off functions from the Z-Wave controlled outlet, and is compatible with incandescent, LED, xenon, halogen....
Check Stock

Minoston Z-Wave Plug with Energy Monitor, 700 Z-Wave Outlet Switch, Z-Wave hub Required, Work with SmartThings, Wink, Vera(MP31ZP)

  • This Z-Wave smart plug is compatible with those Z-Wave hub: SmartThings, Vera, Fibaro, Homeseer. ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Energy Efficient: Z-Wave outlet comes equipped with energy monitoring capability. Monitor use and Save on bills. Enjoy a more efficient home..
  • Timer schedule: Control lights and application to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Wireless control: A large range of types of load are supported to be wirelessly controlled like lamps or small appliances from anywhere and any time by your mobile devices. Home automation is from a little Z-Wave Plug to control small appliances that you want. Overcurrent protection, when the loading is over 15A, the device wil turn off!.
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. Space-saving design leaves the top second outlet free for continued use. Z-Wave Frequency: 908.42MHz..
Check Stock

ENERWAVE Z-Wave Plus Relay, Hidden Smart Switch Wireless Remote Control to Lights and Ceiling Fans, 120-277VAC, 10A, Neutral Wire Required, ZWN-RSM1-PLUS, Black

  • Z-Wave micro switch installs behind an existing wall switch to upgrade it into a Z-Wave switch. Upgrade home automation system while keeping your original switches.
  • Wirelessly control your appliances (lights, fans) from an internet-connected smartphone, tablet, or computer.
  • Utilizes Z-Wave Plus featuring improved battery life, wireless range, increased bandwidth.
  • Acts as a Z-Wave repeater to extend the range of Z-Wave signal up to 100ft.
  • the switch will still work if the module fails.
  • Z-Wave hub and neutral wire required. Single Pole, 120-277 VAC, 50/60Hz, Up to 150ft Range, 10, 000mA (10A) Maximum Load, 908. 42MHz, Slim Design - Dimensions: 1. 63" x 1. 63" x 0. 82". FCC and ETL listed. 1-year.
Check Stock

Zooz Z-Wave Plus S2 Double Plug ZEN25, 2 Outlets, 1 USB Port

  • 2 SMART OUTLETS: Control 2 outlets individually or at once from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Z-Wave alarm panels like ADT, Ring, or Alarm.com. Custom handler required for SmartThings, contact seller for details..
  • POWER MONITOR: Track energy of connected devices for smarter power management. Schedule automatic shut-off times and restore status after power failure. NO ENERGY MONITORING OR ADVANCED SETTINGS ON WINK!.
  • USB PORT: Charge your tablet or headphones and get on/off (charging/charged) reports to your email or phone (NO Z-Wave control, reports only, turn off the device while charging for best results)..
  • SIMPLE SET-UP: Just plug it in to a standard receptacle. The extra compact design allows you to fit 2 Double Plugs in the same receptacle! Go to Zooz support website for step-by-step instructions how to add and use the Double Plug with your Z-Wave hub..
  • CERTIFIED: This device features overload protection and has been confirmed by ETL labs to comply with North American safety standards. It's equipped with the latest S2 smart security (your hub needs to support S2 too) and Z-Wave Plus 500 chip to offer longer range and faster communication speed..
Check Stock

ENERWAVE ZWN-RSM2-PLUS-NEW Z-Wave Plus Dual Module, Hidden Smart Switch, Single Pole, 120-277VAC, 10A Per Relay, Neutral Wire Required, ZWN-RSM2-PLUS, Black (New Version), White

  • Enerwave Z-Wave Plus Dual Relay is the most advanced and customizable module you can add to your existing appliances and lights. Module can be installed in wall boxes behind switches and outlets or in ceiling boxes behind ceiling fans or chandeliers. Hidden relay allows you to use original switches and decorative wall plates.
  • Remotely turn your appliances (lights, fans) on and off from an internet-connected smartphone, tablet, or computer. Program Z-Wave relay switch in scenes, groups, and associations. Dynamic scheduling and control from anywhere. Z-Wave hub required.
  • Z-Wave Plus, featuring 67% improvement in range, 250% more bandwidth, Over The Air (OTA) firmware updates. Backwards compatible with existing Z-Wave devices.
  • 120-277VAC, 10A maximum load per relay. Not compatible with security panels such as Honeywell Panel, NORTEK (2GIG) Security & Control Panel. ETL-listed, FCC compliant. Dimensions: length 2.03” x width 1.72” depth 0.62”.
  • Get into IoT with the best home automation device. Connect your Z-Wave hub to Alexa or Google Assistant for full voice control. Compatibility with Alexa, Google Assistant, or IFTTT is dependent on the Z-Wave hub that is installed.
Check Stock

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do....
Check Stock

EATON RF9642-ZDRB Z-Wave Plus Accessory Dimmer, Oil-Rubbed Bronze

  • Wireless accessory for Eaton’s Z-Wave Plus Universal Smart Dimmer (RF9640-N).
  • Ideal for applications where no traveler wires exist for 3-Way & multi-location control.
  • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
  • Can be associated with (5) other Z-Wave Plus devices when used with a compatible Z-Wave controller.
Check Stock