ReviewsEdge Cutting Machinery

uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

Aicosineg M6 x 12mm Male Thread Aluminum Alloy Adjustable Clamping Lever Handle for Machinery Welding Printing Equipment Black Tone 1pcs Not Include Washer

  • 【MATERIAL】- The adjustable clamping handle is made of high-quality aluminum alloy, with good durability and rust resistance, light weight and corrosion resistance.
  • 【FEATURE】- The adjustable clamping handle adopts superb craftsmanship, each edge can accurately lock the screw without damaging the screw.
  • Just lift the handle of these ratchet buttons to loosen the gear teeth and rotate freely for quick adjustment.
  • 【ADVANTAGE】- This handle is particular for the lever turning angle is limited, owing to lack of space, it is thr ideal tool for lever turning.
  • 【APPLICATION】- These handles are perfect to be used in application requiring frequent and quick adjustments and when working in confined areas.
  • It is widely used in the necessary parts of packaging machinery and equipment, universal knife sharpeners, machine tools, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment and other machinery.
Check Stock

Thread Adjustable Handle, Threaded Stud, Thread Long Lever Lathe Adjustable Clamping Handle, 4Pcs Handle Clamping Lever Thread Push Button Ratchet Male Threaded Stud

  • Made of stainless steel, corrosion resistant and , durable to use..
  • Adjustable position handle adjustment is mainly used for mechanical operating parts of the location, height, etc..
  • Exquisite workmanship, each edge can lock nut accurately , no damage to the nut..
  • This handle is particular for the lever turning angle is limited, owing to lack of space..
  • Application range: such as packaging machinery equipment, universal knife grinding machine, machine tool, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment, etc. A necessary parts of the machine..
Check Stock

uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs

  • ... torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

4PCS Clamping Lever Handle,M8 Stainless Steel Male Thread Adjustable Handle Machine Knobs,Black (32MM)

  • 【EXQUISITE WORKMANSHIP】 Each edge of the female thread fixing handle can lock screws accurately , cause no damage to the screw.
  • 【 USAGE OF HANDLE】Adjustable position handle adjustment is mainly used for mechanical operating parts of the location, height, etc..
  • 【SUITABLE FOR&MATERIAL】This handle is particular for the lever turning angle is limited, owing to lack of space. Stainless steel material, corrosion resistant and wear-resisting..
  • 【RANGE OF APPLICATION】Packaging machinery equipment, universal knife grinding machine, machine tool, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment, etc. A necessary parts of the machine..
  • 【SATISFACTION GUARANTEE】We care for every customers feeling.If this product does not meet or exceed your expectations,please send it back for a 100% refund no questions asked..
Check Stock

24 inch 38 inch and 50 inch Anodized Aluminum Straight Edge Bars | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines

  • ..., pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working..
  • The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even..
  • The bars measure 3/8” thick by 1¾” tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. 24 inch straight edge has a .001" tolerance, the 38 inch straight edge has a .002" tolerance and the 50 inch straight edge has a .003" tolerance..
Check Stock

Yoshihiro HAP40 High Speed Stainless Steel Kiritsuke Multipurpose Chefs Knife Ebony Handle (9.5'' (240mm))

  • ...eed Steel is currently considered to be the most advanced stainless steel on the market for high-end kitchen knives. A particular significance is the high amount of Cobalt (8%) in the steel alloy which give it its high wear-resistance and durability. It makes it perfect for use in its original purpose of industrial machinery, but also excellent in high-end kitchen knives which require long lasting edge retention..
  • The Kiritsuke is one of the most versatile and essential of all knives a cook can have. The blade of the Kiritsuke is wider and straighter than a standard chef knife while having a curved tip. The wideness of the knife with its straight end makes it suited for chopping vegetables while the long curved tip makes it suitable for cutting thin slices in meat or fish..
  • Proudly made in Japan and not mass produced. This knife is complimented with a traditional Japanese Wa-style handcrafted Octagonal Handle that is lightweight and ergonomically welds to the hand for seamless use. A protective wooden sheath called a Saya is included, which protects the knife and adds to its appearance when not in use. Every knife from Yoshihiro is handcrafted by master artisans creating a unique one-of-a-kind work of art..
  • Traditional Japanese knife making values ....
Check Stock

4Pcs Clamping Lever Handle M4/5/6/8/10/12 Level Adjustable Handles Knob Female Thread Machinery Adjustable Handle Clamping Handle Lever (M5)

  • PREMIUM QUALITY STAINLESS STEEL MATERIAL OFFERS GOOD DURABILITY AND NICE APPEARANCE--Made of stainless steel, corrosion resistant and wear-resisting, durable to use.
  • AIMS TO MECHANICAL OPERATION--Adjustable position handle adjustment is mainly used for mechanical operating parts of the location, height, etc.
  • APPLIES TO LOCK SCREWS ACCURATELY WITHOUT DAMAGE IT--Exquisite workmanship, each edge can lock screws accurately, no damage to the screw.
  • IDEAL TOOL FOR LEVER TURNING--This handle is particular for the lever turning angle is limited, owing to lack of space.
  • WIDELY APPLICATIONS FOR DAILY USE--such as packaging machinery equipment, universal knife grinding machine, machine tool, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment, etc. A necessary parts of the machine.
Check Stock

4Pcs Clamping Lever Handle M4/5/6/8/10/12 Level Adjustable Handles Knob Female Thread Machinery Adjustable Handle Clamping Handle Lever (M8)

  • PREMIUM QUALITY STAINLESS STEEL MATERIAL OFFERS GOOD DURABILITY AND NICE APPEARANCE--Made of stainless steel, corrosion resistant and wear-resisting, durable to use.
  • AIMS TO MECHANICAL OPERATION--Adjustable position handle adjustment is mainly used for mechanical operating parts of the location, height, etc.
  • APPLIES TO LOCK SCREWS ACCURATELY WITHOUT DAMAGE IT--Exquisite workmanship, each edge can lock screws accurately, no damage to the screw.
  • IDEAL TOOL FOR LEVER TURNING--This handle is particular for the lever turning angle is limited, owing to lack of space.
  • WIDELY APPLICATIONS FOR DAILY USE--such as packaging machinery equipment, universal knife grinding machine, machine tool, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment, etc. A necessary parts of the machine.
Check Stock

4Pcs Clamping Lever Handle M4/5/6/8/10/12 Level Adjustable Female Handles Knob Thread Machinery Adjustable Handle Clamping Handle Lever (M4)

  • PREMIUM QUALITY STAINLESS STEEL MATERIAL OFFERS GOOD DURABILITY AND NICE APPEARANCE--Made of stainless steel, corrosion resistant and wear-resisting, durable to use.
  • AIMS TO MECHANICAL OPERATION--Adjustable position handle adjustment is mainly used for mechanical operating parts of the location, height, etc.
  • APPLIES TO LOCK SCREWS ACCURATELY WITHOUT DAMAGE IT--Exquisite workmanship, each edge can lock screws accurately, no damage to the screw.
  • IDEAL TOOL FOR LEVER TURNING--This handle is particular for the lever turning angle is limited, owing to lack of space.
  • WIDELY APPLICATIONS FOR DAILY USE--such as packaging machinery equipment, universal knife grinding machine, machine tool, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment, etc. A necessary parts of the machine.
Check Stock

4Pcs Clamping Lever Handle, M4/5/6/8/10/12 Level Adjustable Handles Knob Female Thread Machinery Adjustable Handle Clamping Handle Lever (M10)

  • PREMIUM QUALITY STAINLESS STEEL MATERIAL OFFERS GOOD DURABILITY AND NICE APPEARANCE--Made of stainless steel, corrosion resistant and wear-resisting, durable to use.
  • AIMS TO MECHANICAL OPERATION--Adjustable position handle adjustment is mainly used for mechanical operating parts of the location, height, etc.
  • APPLIES TO LOCK SCREWS ACCURATELY WITHOUT DAMAGE IT--Exquisite workmanship, each edge can lock screws accurately, no damage to the screw.
  • IDEAL TOOL FOR LEVER TURNING--This handle is particular for the lever turning angle is limited, owing to lack of space.
  • WIDELY APPLICATIONS FOR DAILY USE--such as packaging machinery equipment, universal knife grinding machine, machine tool, welding equipment, printing equipment, woodworking machinery, packaging machinery, dyeing equipment, etc. A necessary parts of the machine.
Check Stock